Login | Register

Items where Division is "Building, Civil and Environmental Engineering" and Year is 2005

Group by: Authors | Item Type | No Grouping
Jump to: A | B | C | D | E | G | H | I | K | L | M | Q | R | S | T | W | Y | Z
Number of items: 38.

A

Al-Aghbar, Ahmed (2005) Automated selection of trenchless technology for rehabilitation of water mains. Masters thesis, Concordia University.

B

Badawieh, Ammar (2005) Heavy metal removal from petroleum oily sludge using lemon scented geraniums. Masters thesis, Concordia University.

Bhowmick, Arun Shankar (2005) Development of a dynamic shortest path algorithm and a traffic simulation model. Masters thesis, Concordia University.

C

Candanedo Ibarra, Luis Miguel (2005) Characterization and modeling of unsaturated water liquid transport in softwoods. Masters thesis, Concordia University.

Chakraborty, Ujjal (2005) Performance of single piles in line groups installed in sand. Masters thesis, Concordia University.

Chikh, Belkacem (2005) Investigation of thermal dynamics of floor heating with solar gains. Masters thesis, Concordia University.

D

Dahrazma, Behnaz (2005) Removal of heavy metals from sediment using rhamnolipid. PhD thesis, Concordia University.

Dufour, Marianne Bérubé (2005) Quantification of air leaks through the building envelope using infrared thermography. Masters thesis, Concordia University.

E

El Aghoury, Amr (2005) Development of environmentally-friendly plasticized poly (vinyl chloride) - based flooring formulations. PhD thesis, Concordia University.

G

Guan, Yang (2005) Dynamic modeling and capacity control of multiple chiller systems. Masters thesis, Concordia University.

H

He, Hua Sheng (2005) IFC-based framework for evaluating building envelope performance. Masters thesis, Concordia University.

Horvat, Miljana (2005) Protocol and assessment tool for performance evaluation of light-frame building envelopes used in residential buildings. PhD thesis, Concordia University.

Huang, Shan (2005) Solar-driven vapor flow in wood-frame walls with wetted cladding. Masters thesis, Concordia University.

Huang, Yi-ting (2005) Heavy metals in urban soils. Masters thesis, Concordia University.

I

Ip, Kai Wing (2005) Bearing capacity for foundation near slope. Masters thesis, Concordia University.

K

Kakoli, Sarah Tahsin Noor (2005) Behaviour of sensitive clay under cyclic loading. Masters thesis, Concordia University.

Kalavenkataraman, Sudeesh (2005) Wind loading on rainscreen walls : a wind tunnel investigation. Masters thesis, Concordia University.

Khan, Zafar Ullah (2005) Modeling and parameter ranking of construction labor productivity. Masters thesis, Concordia University.

Khawaja, Nadir Ashraf (2005) A methodology for total life-cycle costing of buildings designed for disassembly. Masters thesis, Concordia University.

L

Liao, Liang (2005) Numerical and experimental investigation of building-integrated photovoltaic-thermal systems. Masters thesis, Concordia University.

M

Meniru, Kenechukwu C. U (2005) Computer-aided conceptual building design. PhD thesis, Concordia University.

Mora, Rodrigo (2005) Representation and reasoning for integrated conceptual design of building structures. PhD thesis, Concordia University.

Mungo, Tania (2005) Water vapour transmission through weather resistive barriers / Tania Mungo. Masters thesis, Concordia University.

Muslat, Ziyad (2005) Heavy metals removal from oil sludge using ion exchange textiles. Masters thesis, Concordia University.

Q

Qu, Junying (2005) Three-dimensional turbulence modeling for free surface flows. PhD thesis, Concordia University.

R

Rahman, Farhana (2005) Passive earth pressure on embedded plate anchors in sand. Masters thesis, Concordia University.

S

Sabry, Mohab (2005) Insitu stresses and capacity of driven piles in sand. PhD thesis, Concordia University.

Sanchez, Francisco E (2005) Environmental impact assessment of offshore flares in "Sonda de Campeche", Mexico. Masters thesis, Concordia University.

Saygili, Gokhan (2005) Liquefaction potential assessment in soil deposits using artificial neural networks. Masters thesis, Concordia University.

T

Tong, Bing (2005) A 3D modeling for detailed quantity take-off for building projects. Masters thesis, Concordia University.

Tzempelikos, Athanassios (2005) A methodology for integrated daylighting and thermal analysis of buildings. PhD thesis, Concordia University.

W

Wang, Fang (2005) On-site labor productivity estimation using neural networks. Masters thesis, Concordia University.

Wang, Kai (2005) Modeling terrain effects and application to the wind loading of low buildings. PhD thesis, Concordia University.

Wang, Weimin (2005) A simulation-based optimization system for green building design. PhD thesis, Concordia University.

Y

Yang, Lijun (2005) Life cycle analysis of the residential HVAC systems in Montréal. Masters thesis, Concordia University.

Yeganeh Talab, Behnoush (2005) The effect of interaction among different indoor materials on perceived air quality. Masters thesis, Concordia University.

Z

Zhang, Jian (2005) A model for collector-storage wall with and without phase change material. Masters thesis, Concordia University.

Zhang, Zhong-Hong (2005) Measurement of diffusion and partition coefficients of VOCs in dry building materials. Masters thesis, Concordia University.

This list was generated on Thu Mar 28 03:06:00 2024 EDT.
Back to top Back to top