Login | Register

Items where Division is "Building, Civil and Environmental Engineering" and Year is 2009

Group by: Authors | Item Type | No Grouping
Jump to: A | B | C | D | E | F | G | H | I | K | L | M | N | P | Q | R | S | T | V | X | Y | Z
Number of items: 41.

A

Abbasy, Farzaan (2009) Thermal conductivity of mine backfill. Masters thesis, Concordia University.

Alimahmoodi, Mahmood (2009) Treatment of Aqueous waste streams contaminated with carbon dioxide and crude oil from an enhanced oil recovery process, Mahmood Alimahmoodi. PhD thesis, Concordia University.

Atici, Mehmet (2009) A 3-D numerical model for pullout capacity of single batter piles in sand. Masters thesis, Concordia University.

B

Bedair, Rania (2009) Comprehensive study of wind loads on parapets. PhD thesis, Concordia University.

Budawara, Nasma (2009) Key performance indicators to measure design performance in construction. PhD thesis, Concordia University.

C

Chen, YuXiang (2009) Modeling and design of a solar house with focus on a ventilated concrete slab coupled with a building-integrated photovoltaic/thermal system. Masters thesis, Concordia University.

D

Du, Lin (2009) Air infiltration through revolving doors. Masters thesis, Concordia University.

E

El-Sawy, Tamer (2009) Effect of retrofit strategies on mitigating progressive collapse of multistorey steel frame structures. Masters thesis, Concordia University.

Enginsal, Munir Alp (2009) Applications of FRP in reinforcing and strengthening concrete masonry beams. Masters thesis, Concordia University.

F

Fahmy, Mohamed (2009) Integrated multiple-sensor methodology for condition assessment of water mains. PhD thesis, Concordia University.

Fallahi, Ali (2009) Thermal performance of double-skin façade with thermal mass. PhD thesis, Concordia University.

G

Guo, Yuan (2009) Rhamnolipid-enhanced remediation of styrene-contaminated soil followd by anaerobic biodegradation. PhD thesis, Concordia University.

Gupta, Amit (2009) Physical Modeling of the downwash effect of rooftop structures on plume dispersion. PhD thesis, Concordia University.

H

Haque, AKM Enamul (2009) Some characteristics of open channel transition flow. Masters thesis, Concordia University.

Hoque, Md. Azizul (2009) Hydraulic analysis of ice-covered river flow. Masters thesis, Concordia University.

I

Idle, Allen Michael (2009) Chloride resistance of high volume fly ash concretes. Masters thesis, Concordia University.

Iqbal, Md Ferdous (2009) Application of magneto-rheological dampers to control dynamic response of buildings. Masters thesis, Concordia University.

Islam, Mohammad Sajjadul (2009) Application of statistical pattern recognition techniques in structural health monitoring. Masters thesis, Concordia University.

K

Kapsis, Konstantinos (2009) Modeling, control and performance evaluation of bottom-up motorized shade. Masters thesis, Concordia University.

Kholafaei, Hamid (2009) Indoor air contaminant removal : full-scale testing of in-duct filters. Masters thesis, Concordia University.

L

Li, Xujun (2009) Surfactant enhanced removal of petroleum products from a contaminated soil with sand and clay components. Masters thesis, Concordia University.

M

Mahmoud, Muhammad Adel Ahmed (2009) Productivity analysis of horizontal directional drilling. Masters thesis, Concordia University.

Mashhour, Ibrahim (2009) Negative skin friction on single piles in collapsible soil. Masters thesis, Concordia University.

Mohammadi Ahani, Reza (2009) Salt scaling resistance : the effect of curing and one-week presaturation. Masters thesis, Concordia University.

Moslemizadeh, Ehsan (2009) The use of geotextiles for the treatment of surface water. Masters thesis, Concordia University.

Mouriki, Eleni (2009) Solar-assisted hybrid ventilation in an institutional building. Masters thesis, Concordia University.

N

Nekoovaght Motlagh, Pejman (2009) An investigation on the influence of microwave energy on basic mechanical properties of hard rocks. Masters thesis, Concordia University.

P

Pauls, Zeina (2009) Punching shear failure of foundations on strong sand overlying deep weak deposit. Masters thesis, Concordia University.

Peng, Qian (2009) Modeling and daylighting design of a new window with integrated controllable louver system. Masters thesis, Concordia University.

Q

Qu, Guang (2009) Online adaptive and intelligent control strategies for multizone VAV systems. PhD thesis, Concordia University.

R

Rahman, Mahabubur (2009) Application of Neural Network and Wavelet Transform Techniques in Structural Health Monitoring. Masters thesis, Concordia University.

Robinson, Leanne (2009) Numerical and experimental study of semi-transparent photovoltaics integrated into commercial building facades. Masters thesis, Concordia University.

S

Saneinejad, Saba (2009) Inwards vapor diffusion due to high temperature gradient in wall assemblies. Masters thesis, Concordia University.

Sasanian, Navid (2009) Out-of-plane flexural performance of GFRP-reinforced concrete masonry walls. Masters thesis, Concordia University.

T

Tadayon, Rahim (2009) Modeling curvilinear flows in hydraulic structures. PhD thesis, Concordia University.

V

Vera Araya, Sergio (2009) Interzonal air and moisture transport through large horizontal openings : an integrated experimental and numerical study. PhD thesis, Concordia University.

X

Xiao, Xiao hui (2009) Trending and forecasting in construction operations. Masters thesis, Concordia University.

Y

Yuan, Jing (2009) Development of an extended environmental multimedia modeling system (EEMMS). PhD thesis, Concordia University.

Z

Zaghtiti, Dima (2009) Adsorption of phosphorus on sediments from Lake Caron and Huron river. Masters thesis, Concordia University.

Zakikhani, Sepideh (2009) Structural health monitoring using wireless sensors and damage detection of civil infrastructures. Masters thesis, Concordia University.

Zhang, Jian (2009) Investigation of airflow and heat transfer in earth-to-air heat exchnagers. PhD thesis, Concordia University.

This list was generated on Wed Apr 17 03:05:57 2024 EDT.
Back to top Back to top