Login | Register

Parametric Modeling Program of Fillet End Mill

Title:

Parametric Modeling Program of Fillet End Mill

Zhu, Jiapu (2016) Parametric Modeling Program of Fillet End Mill. Masters thesis, Concordia University.

[img]
Preview
Text (application/pdf)
Zhu_M.A.Sc_S2016.pdf - Accepted Version
4MB

Abstract

ABSTRACT

Parametric Modeling Program of Fillet End Mill


Jiapu Zhu


End-mill cutter is the most commonly used cutting tool in metal machining industry, especially flat end-mill and fillet end-mill, which provide significant influence on machining efficiency and quality.
Nickel-based high temperature alloy is widely used in aerospace industry due to its excellent performance of mechanical property under rigorous situation. However, it possesses poor machinability and rEqires very high cutting force during milling process. In addition, vibration is another factor which should be taken into consideration.
Variable pitch end-mill is one kind of end-mill cutters that have different parameters in pitch and flute. In this category of design, each integrated cutting feature, namely, bottom, fillet, side, flute and gash are different. Meanwhile, it also can reduces the vibration effectively.
FEA simulation is a time saving and cost saving way in the field of cutting tool design and optimization. An efficient and accurate modeling method is demanded due to the complexity geometry of end-mill cutter.
A lot of research was conducted on end-mill modeling previously. However, most of them focused on symmetric geometry end-mill and there were no introduction about gash modeling. Based on the above reasons, a feature-based modeling method with parametric design is proposed. According to the characteristic of end-mill and based on the mathematic Equations, each feature is designed and modeled individually. Constraints of gash are analyzed and applied. In addition, a customized program is developed with the combination of Visual Basic user interface and CATIA macro programing technique. Finally, a simulation example of the model is conducted to analyze the dynamics during cutting process.

Divisions:Concordia University > Gina Cody School of Engineering and Computer Science > Mechanical and Industrial Engineering
Item Type:Thesis (Masters)
Authors:Zhu, Jiapu
Institution:Concordia University
Degree Name:M.A. Sc.
Program:Mechanical Engineering
Date:March 2016
Thesis Supervisor(s):Chen, Zezhong
ID Code:981183
Deposited By: JIAPU ZHU
Deposited On:15 Jun 2016 19:45
Last Modified:18 Jan 2018 17:52
All items in Spectrum are protected by copyright, with all rights reserved. The use of items is governed by Spectrum's terms of access.

Repository Staff Only: item control page

Downloads per month over past year

Research related to the current document (at the CORE website)
- Research related to the current document (at the CORE website)
Back to top Back to top