Login | Register

Wind-induced Shear and Torsion on Low- and Medium-Rise Earthquake Resistant Steel Braced Frame Buildings

Title:

Wind-induced Shear and Torsion on Low- and Medium-Rise Earthquake Resistant Steel Braced Frame Buildings

Nguyen, Thai Son (2017) Wind-induced Shear and Torsion on Low- and Medium-Rise Earthquake Resistant Steel Braced Frame Buildings. Masters thesis, Concordia University.

[img]
Preview
Text (application/pdf)
Nguyen_MSc_F2017.pdf - Accepted Version
Available under License Spectrum Terms of Access.
5MB

Abstract

There are locations in Canada where buildings are equally affected by wind and earthquake loads. In these areas, designers may rise questions about the governing lateral load. It is known that buildings are designed to respond in the elastic range under wind load and in the inelastic range when subjected to earthquake load. Besides, there are other elements that influence the building responses under lateral loading, such as: building configuration, height, selected ductility level, structural irregularity types and geotechnical characteristics.
This thesis addresses the effect of wind-induced shear and torsion on 22 low-rise and medium-rise steel buildings located on Site Class C and Site Class B. These buildings were designed as earthquake resistant systems according to the 2015 edition of National Building Code of Canada (NBCC 2015) and Steel Design standard specifications (CSA S16-2014). The study examines the impacts from building configurations by considering different width-to-length ratios and heights on two sets of buildings: i) width-to-length ratio 1:4 and ii) width-to-length ratio 1:2. The 1st set comprises five buildings with heights ranging from 14.8 m (4-storey low-rise building) to 43.6 m (12-storey medium-rise building). The 2nd set comprises only medium-rise buildings with 8, 10, and 12 storeys. In addition, two types of ductility levels were selected for the lateral force resisting systems (LFRS): limited-ductility (LD-CBF) and moderately-ductile concentrically braced frames (MD-CBF). Two types of geotechnical characteristics were considered: Site Class C (firm soil) and Site Class B (rock). All designed buildings are structural regular. The effects from torsion, notional lateral load, and P- effect was also studied.
On the process of computing wind load, several ambiguities have been found in the NBCC 2015 wind load provisions. Consequently, recommendations were made to resolve these issues. In addition, these recommendations were implemented in several low-rise and medium-rise buildings before comparing with the results obtained when the ASCE/SEI 7-10 standard and the wind tunnel test were used. It was found that for low-rise buildings, the American standard and Canadian code yielded similar shear but quite different torsional coefficients. On the other hand, for medium-rise buildings, clear agreement was found, for both shear and torsion coefficients.
The comparisons between earthquake and wind loadings show that depending on building heights, horizontal dimensions, location and ductility level, the dominant loads are different. In taller, larger and more ductile buildings in Montreal, for direction normal to the larger face, wind loads may exceed the earthquake loads in the lower floor levels. In all other cases, earthquake load controls the design. For Montreal buildings taller than 8 storeys, selecting LD-CBF is recommended for the LFRS in order to balance the earthquake/wind design criteria. Caution should be given to buildings taller than 10 storeys when verifying the building deflection under the dynamic effect of wind load.

Divisions:Concordia University > Gina Cody School of Engineering and Computer Science > Building, Civil and Environmental Engineering
Item Type:Thesis (Masters)
Authors:Nguyen, Thai Son
Institution:Concordia University
Degree Name:M.A. Sc.
Program:Building Engineering
Date:30 August 2017
Thesis Supervisor(s):Tirca, Lucia and Stathopoulos, Ted
Keywords:Earthquake load, wind load, braced frame, steel buildings, NBCC 2015
ID Code:982898
Deposited By: THAI SON NGUYEN
Deposited On:10 Nov 2017 14:44
Last Modified:18 Jan 2018 17:56

References:

ASCE/SEI 7-10. 2010. Minimum design loads for buildings and other structures. Structural Engineering Institute of ASCE, Reston, VA.
AS-NZS 1170-2. 2011 – Structural design actions – Part 2: Wind actions (By Authority of New Zealand Structure Verification Method B1/VM1).
Computer and Structure, Inc., USA. 2016), CSI Analysis Reference Manual for ETABS, www.csiamerica.com.
CSA (Canadian Standard Association). 2014. Design of Steel Structures, CSA S16-14. Mississauga, Ontario.
Durst, C.S. .1960. Wind speeds over short periods of time. Meteor. Mag. 89, 181-187.
EN 1991-1-1 .2005: Eurocode 1: Actions on structures – Part 1-4: General actions – Wind actions.
EN 1998-1: Eurocode 8: Design of structures for earthquake resistance. Part 1: General rules, earthquake actions and rules for buildings.
Filiatrault, A., Tremblay, R., Christopoulos, C., Folz, B., Pettinga, D. 2013. Elements of earthquake engineering and Structural Dynamics. Third edition.
Isyumov, N., Case, P. C. 2000. Wind-induced torsional loads and responses of buildings, Proceedings of Structures Congress, Philadelphia, Pennsylvania, USA, Sponsored by ASCE/SEI, May 8-10.
Keast, D.C., Barbagallo, A., Wood, G.S. 2012. Correlation of wind load combinations including torsion on medium-rise buildings. Wind and Structures, An International Journal, 15(5), 423-439.
Mitchell, D., Tremblay, R., Karacabeyli, E., Paultre, P., Saatcioglu, M. and Anderson, D.L. 2003. Seismic Force Modification Factors for the Proposed 2005 NBCC. Canadian Journal of Civil Engineering.
NBCC 2010. User’s Guide – NBCC 2010, Structural Commentaries (part 4). Issued by the Canadian Commission on Building and Fire Codes, National Research Council of Canada.
National building code of Canada 2015. Canadian Commission on building and fire codes, National research Council Canada. Associate Committee on the National Building Code, NRCC, Ottawa, ON.
Nguyen, S., Stathopoulos, T., Tirca, L. Wind-induced Shear and Torsion in Low- and Medium-rise Buildings: Provisions of National Building Code of Canada 2015 (NBCC 2015). Canadian Journal of Civil Engineering, 2017 (under review).
Stathopoulos, T., Elsharawy, M., Galal, K. 2013. Wind load combinations including torsion for rectangular medium-rise buildings. International journal of high-rise buildings. September 2013, Vol 2, no 3, 245-255.
Tamura, Y., Kikuchi, H., Hibi, K. 2003. Quasi-static wind load combinations for low- and middle-rise buildings. Journal of Wind Engineering and Industrial Aerodynamics, 91, 1613-1625.
Taranath, B. 2004. Wind and earthquake resistant buildings structural and analysis design. New York: Marcel Dekker.
All items in Spectrum are protected by copyright, with all rights reserved. The use of items is governed by Spectrum's terms of access.

Repository Staff Only: item control page

Downloads per month over past year

Back to top Back to top