Login | Register

Design of Tunable Beamforming Networks Using Metallic Ridge Gap Waveguide Technology

Title:

Design of Tunable Beamforming Networks Using Metallic Ridge Gap Waveguide Technology

Saif, Mohamed Ahmed Nasr Mohamed ORCID: https://orcid.org/0000-0002-2210-3524 (2019) Design of Tunable Beamforming Networks Using Metallic Ridge Gap Waveguide Technology. PhD thesis, Concordia University.

[thumbnail of Saif_PhD_S2020.pdf]
Preview
Text (application/pdf)
Saif_PhD_S2020.pdf - Accepted Version
Available under License Spectrum Terms of Access.
4MB

Abstract

Wireless communication is a leap of development in the history of humanity. For the past 100 years, a considerable effort has been spent to develop better standards, and technologies for a higher speed wireless communication with high system capacity for different applications. This requires the design of a high-frequency, point-to-multipoint antenna array system to achieve the mentioned goals. In addition, the reconfigurability of this antenna system is essential to change the system characteristics to achieve acceptable performance in different situations.
The main goal of this thesis is to design a reconfigurable beamforming network to work on the Ka-band for waveguide applications. Among different beamforming networks in the literature, the Butler matrix is chosen due to its higher efficiency and the smaller number of components required than other beamforming networks. The Butler matrix is designed using a dual-plane topology to avoid using crossovers. Ridge gap waveguide technology is chosen among different transmission lines to implement the Butler matrix for several reasons: It does not need dielectrics to operate, so its power handling capacity is defined by the gap height, and it has no dielectric losses. Its zero-field region represents the operating principle for some tunable devices introduced here and its contactless nature, which eases the assembly of waveguide parts at the millimeter-wave frequencies. The reconfigurability of the Butler matrix is implemented such that beamwidth, maximum gain, and beam direction may be all tuned for optimum system performance.
To that end, several components are designed to achieve the required target, and strict requirements are placed on several components to achieve an acceptable cascaded-system performance. These components include a ridge gap waveguide 90o-hybrid working over a more than 30% bandwidth, which can provide several coupling levels ranging from 3 dB to 33 dB and a return loss and isolation better than 30 dB. Another component is a wideband reconfigurable power splitter that has a 40% bandwidth, a return loss better than 20 dB in the worst case and the ability to achieve all power splitting ratios including switching between the two guides. In addition, a wideband reconfigurable phase shifter is designed to have 33% bandwidth and phase shift tuning range from 0o to 200o. Two coaxial-to-ridge gap waveguide transitions are designed to work over a more than 100% bandwidth to facilitate testing different ridge gap waveguide components. Analysis of the asymmetric double ridge waveguide is introduced where its impedance is deduced and may be used to design a single to double ridge waveguide transition useful for the dual-plane Butler matrix introduced here. In addition, this concept is used to develop a wideband unequal power divider in the single ridge waveguide technology.
At the end, the whole system is assembled to show its performance in different tuning states. The ability of the system to produce radiation patterns of different characteristics is demonstrated. The presented Butler matrix design is a promising beamforming network for several applications like radar, base stations for mobile communications, and satellite applications.

Divisions:Concordia University > Gina Cody School of Engineering and Computer Science > Electrical and Computer Engineering
Item Type:Thesis (PhD)
Authors:Saif, Mohamed Ahmed Nasr Mohamed
Institution:Concordia University
Degree Name:Ph. D.
Program:Electrical and Computer Engineering
Date:27 September 2019
Thesis Supervisor(s):Kishk, Ahmed
Keywords:Tunable Butler matrix - Transition - Coupler - Divider - Phase shifter - Ridge Gap Waveguide - Beamforming Networks
ID Code:986140
Deposited By: Mohamed Ahmed Nasr Mohamed Saif
Deposited On:25 Jun 2020 18:48
Last Modified:25 Jun 2020 18:48
All items in Spectrum are protected by copyright, with all rights reserved. The use of items is governed by Spectrum's terms of access.

Repository Staff Only: item control page

Downloads per month over past year

Research related to the current document (at the CORE website)
- Research related to the current document (at the CORE website)
Back to top Back to top