[1]   K.G. Satyanarayana: Aluminum Cast Metal Matrix Composites, Handbook of Ceramics and Composites, Cheremisinoff N. P., New York, USA, 1989, pp. 555-599. 
[2]   S.F. Hassan and M. Gupta: Development of a novel magnesium-copper based composite with improved mechanical properties, Materials Research Bulletin, Vol. 37, No. 2, 2002, pp. 377-389.
[3]    S.C. Tjong and Z.Y. Ma: Microstructural and mechanical characteristics of in situ metal matrix composites,” Materials Science and Engineering: R: Reports, Vol. 29, No. (3-4), 2000, pp. 49-113.
[4]    Q.F. Guan, H.Y. Wang, X.L. Li, and Q.C. Jiang: Effect of compact density on the fabrication of Mg-TiC composites, Journal of Materials Science, Vol. 39, No. 16, 2004, pp. 5569-5572.
[5]   Q.C. Jiang, X.L. Li, and H.Y. Wang: Fabrication of TiC particulate reinforced magnesium matrix composites, Scripta Materialia, Vol. 48, No. 6, 2003, pp. 713-717.
[6]   B.L. Mordike, and T. Ebert: Magnesium: Properties-applications-potential, Materials Science and Engineering A, Vol. 302, No. 1, 2001, pp. 37-45.
[7]   A. Luo: Processing, microstructure, and mechanical behavior of cast magnesium metal matrix composites, Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, Vol. 26A, No. 9, 1995, pp. 2445-2455.
[8]    M. Kulekci: Magnesium and its alloys applications in automotive industry, The International Journal of Advanced Manufacturing Technology, Vol. 39, No. 9, 2008, pp. 851-865.
[9]    H.Y. Wang, Q.C. Jiang, X.L. Li, J.G. Wang, Q.F. Guan, and H.Q. Liang: In-situ synthesis of TiC from nanopowders in a molten magnesium alloy, Materials Research Bulletin, Vol. 38, No. 8, 2003, pp. 1387-1392.
[10]   Y. Wang, H.Y. Wang, K. Xiu, H.Y. Wang, and Q. C. Jiang: Fabrication of TiB2 particulate reinforced magnesium matrix composites by two-step processing method, Materials Letters, Vol. 60, No. 12, 2006, pp. 1533-1537.
[11]  L.Q. Chen, Q. Dong, M.J. Zhao, J. Bi, and N. Kanetake: Synthesis of TiC/Mg composites with interpenetrating networks by in-situ reactive infiltration process, Materials Science and Engineering: A, Vol. 408, No. (1-2), 2005, pp. 125-130.
[12]  G. Wen, S.B. Li, B.S. Zhang, and Z.X. Guo: Reaction synthesis of TiB2-TiC composites with enhanced toughness, Acta Materialia, Vol. 49, No. 8, 2001, pp. 1463-1470.
[13]   W.J. Li, , R. Tu, and T. Goto: Preparation of directionally solidified TiB2-TiC eutectic composites by a floating zone method, Materials Letters, Vol. 60, No. 6, 2006, pp. 839-843.
[14]  X. Zhang, H. Wang, L. Liao, and N. Ma: New Synthesis Method and Mechanical Properties of Magnesium Matrix Composites, Journal of ASTM International, 2005, Vol. 3, No. 10.
[15] B. Ma, H. Wang, Y. Wang, and Q. Jiang: Fabrication of (TiB2−TiC)p/AZ91 magnesium matrix hybrid composite, Journal of Materials Science, Vol. 40, No. 17, 2005, pp. 4501-4504.
[16]  X. Zhang, H. Wang, L. Liao, X. Teng, and N. Ma: The mechanical properties of magnesium matrix composites reinforced with (TiB2+TiC) ceramic particulates, Materials Letters, Vol. 59, No. 17, 2005, pp. 2105-2109.
[17]  K.U. Kainer: Magnesium-Alloys and Technology, Wiley-VCH Verlag GmbH & Co, Weinheim, Germany, 2003.
[18]  Y.Z. Lü, Q.D. Wang, W.J. Ding, X.Q. Zeng, and Y.P. Zhu: Fracture behavior of AZ91 magnesium alloy, Materials Letters, Vol. 44, No. 5, 2000, pp. 265-268.
[19]  L. Chen, J. Guo, , B. Yu, , and Z. Ma: Compressive Creep Behavior of TiC/AZ91D Magnesium-matrix Composites with Interpenetrating Networks, Journal of Materials Science and Technology, Vol. 23, No. 2, 2007, pp. 207-212.
[20]  Q. Dong, L.Q. Chen, M.J. Zhao, and J. Bi: Synthesis of TiCp reinforced magnesium matrix composites by in-situ reactive infiltration process, Materials Letters, Vol. 58, No. 6, 2004, pp. 920-926.
[21]   D. Qun, L. Chen, Z. Mingjiu, and B. Jing: Analysis of in-situ reaction and pressureless infiltration process in fabricating TiC/Mg composites, Journal of Materials Science and Technology, Vol. 20, 2004, pp. 3-7.
[22]  L. Chen, J. Guo, J. Wang, X. Yongbo, and B. Jing: Tensile Deformation and Fracture Behavior of AZ91D Magnesium Alloy and TiC/Mg Magnesium Matrix Composites Synthesized by in-situ Reactive Infiltration Technique, Journal of Rare Metal Materials and Engineering, Vol. 35, No. 1, 2006, pp. 29-32.
[23]   J.J. Wang, J.H. Guo, and L.Q. Chen: TiC/AZ91D composites fabricated by in-situ reactive infiltration process and its tensile deformation, Transactions of Nonferrous Metals Society of China, Vol. 16, No. 4, 2006, pp. 892-896.
[24]  W. Cao, C. Zhang, T. Fan, and D. Zhang: In-Situ Synthesis and Compressive Deformation Behaviors of TiC Reinforced Magnesium Matrix Composites, Materials Transactions, Vol. 49, No. 11, 2008, pp. 2686-2691. 
[25]   A. Chaubey, B. Mishra, N. Mukhopadhyay, and P. Mukherjee: Effect of compact density and preheating temperature of the Al–Ti–C preform on the fabrication of in-situ Mg–TiC composites, Journal of Materials Science, Vol. 45, No. 6, 2010, pp. 1507-1513.
[26]  N. Chawla and K.K. Chawla: Metal Matrix Composites, Springer+Busness Media, Inc., New York, 2006.
[27]  H. Ye, and X. Liu: Review of recent studies in magnesium matrix composites, Journal of Materials Science, Vol. 39, No. 20, 2004, pp. 6153-6171.
[28]   S.R. Nutt: Defects in Silicon Carbide Whiskers, Journal of the American Ceramic Society, Vol. 67, No. 6, 1984, pp. 428-431.
[29]   A. Evans, C. San Marchi, and A. Mortensen: Metal matrix composites in industry: an introduction and a survey, Kluwer Academic Publishers, Dordrecht, Netherlands, 2003.
[30]  I.A. Ibrahim, F.A. Mohamed, and E.J. Laverina: Particulate reinforced metal matrix composites-a review, Journal of Materials Science, Vol. 26, 1991, pp. 1137-1156.
[31]  A.L. Geiger and M. Jackson: Low-expansion MMCs boost avionics, Advanced Materials Process, Vol. 136, No. 1, 1989, pp. 23-30.
[32]  C.A. Leon-Patino: Infiltration Processing of Metal Matrix Composites using Coated Ceramic Particulates, Ph.D. diss., McGill university, Montreal, Canada, 2000.
[33]   K.U. Kainer: Influencee of the Production Technique and Type of Reinforcement on the properties of Magnesium Matrix Composites, Composite Material technology, ASME, Vol. 37, 1991, pp. 191-197.
[34]  R.W. Cahn, P. Haasen, and E.J. Kramer: Structure and Properties of Composites, VCH, New York, USA, 1993. 
[35]    P.K. Rohatgi: Cast Metal Matrix Composites, ASM International, Ohio, USA, 1988.
 [36] H.Y. Wang, Q.C. Jiang, Y.G. Zhao, and F. Zhao: In situ synthesis of TiB2/Mg composite by self-propagating high-temperature synthesis reaction of the Al-Ti-B system in molten magnesium, Journal of Alloys and Compounds, Vol. 379, No. (1-2), 2004, pp. L4-L7.
[37]  B.W. Chua, L. Lu, and M.O. Lai: Influence of SiC particles on mechanical properties of Mg based composite, Composite Structures, Vol. 47, No. (1-4), 1999, pp. 595-601.
[38]   Q.C. Jiang, H.Y. Wang, B.X. Ma, Y. Wang, and F. Zhao: Fabrication of B4C particulate reinforced magnesium matrix composite by powder metallurgy, Journal of Alloys and Compounds, Vol. 386, No. (1-2), 2005, pp. 177-181.
[39]   K. Xiu, Q. Jiang, B. Ma, Y. Wang, H. Sui, and E. Shang: Fabrication of TiC/Mg composites by powder metallurgy, Journal of Materials Science, Vol. 41, No. 5, 2006, pp. 1663-1666.
[40]   H.Y. Wang, Q.C. Jiang, Y. Wang, B.X. Ma, and F. Zhao: Fabrication of TiB2 particulate reinforced magnesium matrix composites by powder metallurgy, Materials Letters, Vol. 58, No. (27-28), 2004, pp. 3509-3513.
[41]  J. Hashim, L. Looney, and M.S.J. Hashmi: Metal matrix composites: production by the stir casting method, Journal of Materials Processing Technology, Vol. 92-93, 1999, pp. 1-7.
[42]   M.K. Surappa: Microstructure evolution during solidification of DRMMCs: state of art, Journal of Materials Processing Technology, Vol. 63, 1997, pp. 325-333.
 [43]  D.M. Skibo, D.M. Schuster, and L. Jolla: Process for preparation of composite materials containing nonmetallic particles in a metallic matrix and composite materials made thereby, US Patent 4786467, 1988.
[44]  G.S. Hanumanth, and G.A. Irons: Particle incorporation by melt stirring for the production of metal-matrix composites, Journal of Materials Science, Vol. 28, No. 9, 1993, pp. 2459-2465.
[45]  R.A. Saravanan and M.K. Surappa: Fabrication and characterisation of pure magnesium-30 vol.% SiCP particle composite, Materials Science and Engineering A, Vol. 276, No. (1-2), 2000, pp. 108-116.
[46]  P. Poddar, V.C. Srivastava, P.K. De, and K.L. Sahoo: Processing and mechanical properties of SiC reinforced cast magnesium matrix composites by stir casting process, Materials Science and Engineering: A, Vol. 460-461, 2007, pp. 357-364.
[47]  R. Asthana: Reinforced cast metals: Part I Solidification microstructure, Journal of Materials Science, Vol. 33, No. 7, 1998, pp. 1679-1698.
[48] T.W. Clyne: 3.7.12. Metal Matrix Composites: Matrices and Processing,” Encyclopedia of Materials: Science and Technology,  Composites: MMC, CMC, PMC, ed. A Mortensen, Elsevier, 2001, pp. 1-14.
[49] D.J. Lloyd: Particle reinforced aluminium and magnesium matrix composites, International Materials Reviews, Vol. 39, 1994, pp. 1-23.
[50] T.W. Clyne and P.J. Withers: An Introduction to Metal Matrix Composites, Cambridge University Press, London, England, 1995.
[51]  T. Ebert, F. Moll, and K.U. Kainer: Spray forming of magnesium alloys and composites, Powder Metallurgy, Vol. 40, No. 2, 1997, pp. 126-130.
[52]   A. Noguchi, I. Ezawa, J. Kaneko, and M. Sugamata: SiCp/Mg-Ce and Mg-Ca alloy composites obtained by spray forming, Keikinzoku, Vol. 45, No. 2, 1995, pp. 64-69.
[53]  P.J. Vervoort and J. Duszczyk: Spray deposited magnesium alloy and composite, In Procceedings of International Conference on PM Aerospace  Materials, 1991.
 [54]  H.Y. Wang, Q.C. Jiang, X.L. Li, and J.G. Wang: In situ synthesis of TiC/Mg composites in molten magnesium, Scripta Materialia, Vol. 48, No. 9, 2003, pp. 1349-1354.
[55]   Q.C. Jiang, H.Y. Wang, J.G.Wang, Q.F. Guan, and C.L. Xu: Fabrication of TiCp/Mg composites by the thermal explosion synthesis reaction in molten magnesium, Materials Letters, Vol. 57, No. (16-17), 2003, pp. 2580-2583.
[56]  M.J. Koczak and M.K. Premkumar: Emerging technologies for the in situ production of MMC's, The Journal of the Minerals, Metals, and Materials Society, Vol. 45, No. 1, 1993, pp. 44-48.
[57]   R.J. LaBotz and D.R. Mason: The thermal conductivities of Mg2Si and Mg2Ge, Journal of the Electrochemical Society, Vol. 110, No. 2, 1963, pp. 121-126.
 [58]  S. Beer, G. Frommeyer, and E. Schmid: Development of Mg-Mg2Si light weight alloys, Magnesium Alloys Their Applications, DGM conference paper, 1992, pp. 317-324.
 [59]  E.E. Schmid, K. Von Oldenburg, and G. Forommeyer: Microstructure and properties of as-cast intermetallic Mg2Si-Al alloys, Z. fur Metallkunde, Vol. 81, No. 11, 1990, pp. 809-815. 
[60]   M. Mabuchi, K. Kubota, and K. Higashi: Tensile strength, ductility and fracture of magnesium-silicon alloys, Journal of Materials Science, Vol. 31, No. 6, 1996, pp. 1529-1535.
[61]   M. Mabuchi, K. Kubota, and K. Higashi: Development of Mg-Si alloys by I/M and R/S routes, Proceedings of the Third Symposium on Light Weight Alloys for Aerospace Applications, Las Vegas, Nevada, USA, 1995,  pp. 463-470.
[62]  M. Mabuchi, K. Kubota, and K. Higashi: High strength and high strain rate superplasticity in a Mg-Mg2Si composite, Scripta Metallurgica et Materialia, Vol. 33, No. 2, 1995, pp. 331-335.
[63]   H. Yu, G. Min, and X. Chen: The microstructure and mechanical properties of Mg-11Li composites reinforced by the self-nascent MgO/Mg2Si particulates, Metallofizika I Noveishie Tekhnologii, Vol. 20, No. 1, 1998, pp. 61-64. 
[64]  T. Choh, M. Kobashi, H. Nakata, and H. Kaneda: Fabrication of metal matrix composites by spontaneous infiltration and subsequent in-situ reaction process, Materials Science Forum, Vol. 217-222, 1996, pp. 353-358.
[65]  K. Yamada, T. Takahashi, and M. Motoyama: EPMA state analysis of formation of TiC during mechanical alloying on a Mg-Ti-graphite powder mixture, Journal of the Japan Institute of Metals, Vol. 60, No. 1, 1996, pp. 100-105.
[66]   A. Contreras, V.H. López, and E. Bedolla: Mg/TiC composites manufactured by pressureless melt infiltration, Scripta Materialia, Vol. 51, No. 3, pp. 249-253.
[67]   M.A. Matin, L. Lu, and M. Gupta: Investigation of the reactions between boron and titanium compounds with magnesium, Scripta Materialia, Vol. 45, No. 4, 2001, pp. 479-486.
[68]   D. Muscat, K. Shanker, and R.A.L. Drew: Al/TiC Composites Produced by Melt Infiltration, Materials Science & Technology, Vol. 8, No. 11, 1992, pp. 971-976.
[69]  S.T. Mileiko: Fabrication of Metal Matrix Composites, Elsevier Science Publishers, 1983.
[70]  D. Muscat and R.A.L. Drew: Infiltration Kinetics of Aluminum in Titanium Carbide Preforms, In Proceedings of International Conference High Temperature Capillarity,  Cracow, Poland, 1997.
[71] D. Kopeliovich, “Liquid state fabrication of Metal Matrix Composites”, http://www.substech.com, Apr. 2009.
[72]   F. Delannay, L. Froyen, and A. Deruyttere: The wetting of solids by molten metals and its relation to the preparation of metal-matrix composites composites, Journal of Materials Science, Vol. 22, No. 1, 1987, pp. 1-16.
[73]  H. Lianxi, and W. Erde: Fabrication and mechanical properties of SiCw/ZK51A magnesium matrix composite by two-step squeeze casting, Materials Science and Engineering A, Vol. 278, No. (1-2), 1999, pp. 267-271.
[74]  A. Lu, J. Renaud, I. Nakatsugawa, and J. Plourde: Magnesium Castings for Automotive Applications, JOM, Vol. 47, No. 7, 1995, pp. 28-31.
[75]  K. Wu, M. Zheng, C. Yao, T. Sato, H. Tezuka, A. Kamio, and D.X. Li: Crystallographic orientation relationship between SiCw and Mg in squeeze-cast SiCw/Mg composites, Journal of Materials Science Letters, Vol. 18, No. 16, 1999, pp. 1301-1303.
[76]  M. Zheng, K. Wu, and C. Yao: Effect of interfacial reaction on mechanical behavior of SiCw/AZ91 magnesium matrix composites, Materials Science and Engineering A, Vol. 318, No. (1-2), 2001, pp. 50-56.
[77]  G.A. Chadwick, and A. Bloyce: Squeeze cast magnesium alloys and magnesium based composites, Magnesium Alloys Their Applications, DGM Conference Paper, 1992, pp. 93-100 
[78] K.U. Kainer: Magnesium-Alloys and Technology, Wiley-VCH, Weinheim, Germany, 2000.
[79] M.M. Schwartz: Composite Materials, Volume I: Properties, Non-Destructive Testing, and Repair, Prentice Hall, New Jersey, USA, 1997.
[80]  C. Toy, and W.D. Scott: Ceramic-metal composites produced by melt infiltration, Journal of American Ceramic Society, Vol. 73, No. 1, 1990, pp. 97-101.
[81]  S. Valdez, B. Campillo, R. Pérez, L. Martínez, and H.A. García: Synthesis and microstructural characterization of Al-Mg alloy-SiC particle composite, Materials Letters, Vol. 62, No. (17-18), 2008, pp. 2623-2625.
[82]  H. Kaneda, and T. Choh: Fabrication of particulate reinforced magnesium composites by applying a spontaneous infiltration phenomenon, Journal of Materials Science, Vol. 32, No. 1, 1997, pp. 47-56.
[83]   E. Aghion, B. Bronfin, and D. Eliezer: The role of the magnesium industry in protecting the environment, Journal of Materials Processing Technology, Vol. 117, No. 3, 2001, pp. 381-385.
[84]   X. Zhang, L. Liao, N. Ma, and H. Wang: New In-situ synthesis method of magnesium matrix composites reinforced with TiC particulates, Materials Research, Vol. 9, 2006, pp. 357-360.
[85]   J.N.  Fridlyander, and I.H. Marshall: Metal Matrix Composites, Caphman & Hall, London, England, 1995.
[86]  M. Taya, and R.J. Arsenault: Metal Matrix Composites, Pergamon Press, New York, USA, 1989.
[87] M.M. Avedesian and H. Baker: Magnesium and magnesium alloys, ASM International. Ohio, US, 1999.
[88] Y. Liang, and S.P. Dutta: Application trend in advanced ceramic technologies, Technovation, Vol. 21, No. 1, 2001, pp.61-65.
[89] N. Durlu: Titanium carbide based composites for high temperature applications, Journal of the European Ceramic Society, Vol. 19, No. (13-14), 1999, pp. 2415-2419.
[90]  J.F. Shackelford and W. Alexander: CRC Materials Science and Engineering Handbook, Third edition, CRC Press, Boca Raton, Florida, 2001.
[91]  R.G. Munro: Material Properties of Titanium Diboride, Journal of Research of the National Institute of St