[1] M. Ainsworth and J.T. Oden, A unified approach to a posteriori error estimation using element residual methods, Numer. Math. 65 (1993), pp. 23–50. 

[2] M. Ainsworth and J.T. Oden, A Posteriori Error Estimation in Finite Element Analysis, Wiley & Sons Inc (2000).

[3] I. Babuška and W.C. Rheinboldt, A posteriori error estimates for the finite element method, Int. J. Numer. Methods Engrg. 12 (1978), pp. 1597–1615. 

[4] I. Babuška and T. Strouboulis, The Finite Element Method and its Reliability, Oxford University Press (2001).

[5] R. Becker and R. Rannacher, A feed-back approach to error control in finite element methods: basic analysis and examples, East–West J. Numer. Math. 4 (1996), pp. 237–264. 

[6] R. Becker and R. Rannacher, An optimal control approach to a posteriori error estimation in finite element methods, Acta Numer. 10 (2001), pp. 1–102.

[7] F.H. Bertrand, M.R. Gadbois and P.A. Tanguy, Tetrahedral elements for fluid flow, Int. J. Numer. Methods Engrg. 33 (1992), pp. 1251–1267. 

[8] G.F. Carey and J.T. Oden, Finite Elements: Fluid Mechanics vol. 4, Prentice-Hall, Englewood Cliffs (1986).

[9] Z. Cheng and M. Paraschivoiu, Parallel computations of finite element output bounds for conjugate heat transfer, Finite Elem. Anal. Des. 39 (2003), pp. 581–597. 

[10] Z. Cheng and M. Paraschivoiu, A posteriori finite element bounds to linear functional outputs of the three dimensional Navier–Stokes equations, Int. J. Numer. Methods Engrg. 61 (2005), pp. 1835–1859.

[11] H.-W. Choi, A posteriori finite element bounds with adaptive mesh refinement: application to outputs of the three dimensional convection–diffusion equation, Master’s thesis, Department of Mechanical and Industrial Engineering, University of Toronto, November 2001.

[12] H.-W. Choi and M. Paraschivoiu, A posteriori finite element output bounds with adaptive mesh refinement: application to a heat transfer problem in a three-dimensional rectangular duct, Comput. Methods Appl. Mech. Engrg. 191 (2002), pp. 4905–4925. 

[13] H.-W. Choi and M. Paraschivoiu, Adaptive computations of a posteriori finite element output bounds: a comparison of the “hybrid-flux” approach and the “flux-free” approach, Comput. Methods Appl. Mech. Engrg. 193 (2004), pp. 4001–4033.

[14] H.-W. Choi and M. Paraschivoiu, A faster “Hybrid-Flux” calculation approach to output bounds for three dimensional problems, Int. J. Comput. Fluid Dyn. 19 (2005), pp. 115–130. 

[15] H.-W. Choi and M. Paraschivoiu, Advanced hybrid-flux approach for output bounds of electro-osmotic flows: adaptive refinement and direct equilibration strategies, Int. J. Microfluidics Nanofluidics 2 (2006) (2), pp. 154–170. 

[16] R. Glowinski, Finite element methods for incompressible viscous flow. In: P.G. Ciarlet and J.L. Lions, Editors, Handbook of Numerical Analysis vol. IX, North-Holland, Elsevier (2003).

[17] M.D. Gunzburger, Finite Element Methods for Viscous Incompressible Flows, A Guide to Theory, Practice, and Algorithms, Academic Press, San Diego (1989).

[18] M.D. Gunzburger, Navier–Stokes equations for incompressible flows: finite-element methods, Handbook of Computational Fluid Mechanics, Academic Press, San Diego (1996) (Chapter 3).

[19] P. Ladevèze and D. Leguillon, Error estimation procedures in the finite element method and applications, SIAM J. Numer. Anal. 20 (1983), pp. 485–509.

[20] P. Ladevèze and J.-P. Pelle, Mastering Calculations in Linear and Nonlinear Mechanics, Springer, New York (2005).

[21] L. Machiels, Y. Maday and A.T. Patera, A “flux-free” nodal Neumann subproblem approach to output bounds for partial differential equations, C.R. Acad. Sci. Ser. I: Math (Numer. Anal.) 330 (2000), pp. 249–254. 

[22] L. Machiels, J. Peraire and A.T. Patera, A posteriori finite element output bounds for the incompressible Navier–Stokes equations: application to a natural convection problem, J. Comput. Phys. 172 (2001), pp. 401–425. 

[23] Y. Maday, A.T. Patera and J. Peraire, A general formulation for a posteriori bounds for output functionals of partial differential equations; application to the eigenvalue problem, C.R. Acad. Sci. Ser. I: Math (Numer. Anal.) 328 (1999), pp. 823–828. 

[24] J.T. Oden and S. Prudhomme, Goal-oriented error estimation and adaptivity for the finite element method, Comput. Math. Appl. 41 (2001), pp. 735–756. 

[25] M. Paraschivoiu, A posteriori finite element output bounds in three space dimensions using the FETI method, Comput. Methods Appl. Mech. Engrg. 190 (2001), pp. 6629–6640. 

[26] M. Paraschivoiu and A.T. Patera, A hierarchical duality approach to bounds for the outputs of partial differential equations, Comput. Methods Appl. Mech. Engrg. 158 (1998), pp. 389–407. 

[27] M. Paraschivoiu, J. Peraire and A.T. Patera, A posteriori finite element bounds for linear-functional outputs of elliptic partial differential equations, Comput. Methods Appl. Mech. Engrg. 150 (1997), pp. 289–312. 

[28] S. Prudhomme and J.T. Oden, On goal-oriented error estimation for elliptic problems: application to the control of pointwise errors, Comput. Methods Appl. Mech. Engrg. 176 (1999), pp. 313–331. 

[29] J.N. Reddy and D.K. Gartling, The Finite Element Method in Heat Transfer and Fluid Dynamics, CRC Press, Boca Raton (1994).

[30] T. Skalický, LASPack Reference Manual. Institute for Fluid Mechanics, Dresden University of Technology. <http://www.tu-dresden.de/mwism/skalickey/laspack/laspack.html>, 1996. version 1.12.3.

[31] G. Strang, Introduction to Applied Mathematics, Wellesley-Cambridge Press (1986).

[32] R. Verfürth, A Review of A Posteriori Error Estimation and Adaptive Mesh-Refinement Techniques, Wiley & Teubner (1996).

[33] H. Wu, An a posteriori finite element error estimator for adaptive grid computation of viscous incompressible flows, Ph.D. Thesis, Department of Mechanical and Industrial Engineering, University of Toronto, 2000.

[34] O.C. Zienkiewicz and J.Z. Zhu, A simple error estimator and adaptive procedure for practical engineering analysis, Int. J. Numer. Methods Engrg. 24 (1987), pp. 337–357.