G. A. McCoy and J. G. Douglass  Energy-Efficient Electric Motor Selection Handbook,  1993 :Bonneville Power Admin. 

2. C. P. Steinmetz  "On the law of hysteresis (originally published in 1892)",  Proc. IEEE,  vol. 72,  no. 2,  pp.197 -221 1984 

3. G. Bertotti  "General properties of power losses in soft ferromagnetic materials",  IEEE Trans. Magn.,  vol. 24,  no. 1,  pp.621 -630 1988 

4. Y. Chen and P. Pillay  "An improved formula for lamination core loss calculations in machines operating with high frequency and high flu density excitation",  Conf. Rec. 37th IEEE IAS Annu. Meeting,  vol. 2,  pp.759 -766 2002 

5. D. M. Ionel , M. Popescu , S. J. Dellinger , T. J. E. Miller , R. J. Heideman and M. I. McGilp  "On the variation with flux and frequency of core loss coefficients in electrical machine",  IEEE Trans. Magn,  vol. 42,  no. 3,  pp.658 -667 2006 

6. A. Boglietti , A. Cavagnino , M. Lazzari and M. Pstorelli  "Predicting iron losses in soft magnetic materials with arbitrary voltage supply: An engineering approach",  IEEE Trans. Magn.,  vol. 39,  no. 2,  pp.981 -989 2003 

7. T. L. Mthombeni and P. Pillay  "Physical basis for the variation of lamination core loss coefficients as a function of frequency and flux density",  Proc. Annu. Conf. IEEE Ind. Electron. Soc.,  pp.1381 -1387 2006 

8. Y. Zhang , R. Guan , P. Pillay and M.-C. Cheng  "General core loss models on a magnetic lamination",  Proc. IEEE Int. Electric Mach. Drives Conf.,  pp.1529 -1534 2009 

9. M. Ibrahim and P. Pillay  "Novel equipment for the measurement of core losses in laminations for advanced machines",  Proc. IEEE Int. Electric Mach. Drives Conf.,  pp.1231 -1236 2011 

10. M. Manyage  Traction motor design,  2008 

11. T. Nakata , Y. Ishihara and M. Nakano  "Iron losses of silicon steel core produced by distorted flux",  Elect. Eng. Jpn.,  vol. 90,  no. 1,  pp.10 -20 1970 

12. J. D. Lavers , P. P. Biringer and H. Hollitscher  "A simple method of estimating the minor loop hysteresis loss in thin laminations",  IEEE Trans. Magn.,  vol. MAG-14,  no. 5,  pp.386 -388 1978 

13. P. Rupanagunta , J. S. Hsu and W. F. Weldon  "Determination of iron core losses under influence of third-harmonic flux component",  IEEE Trans. Magn.,  vol. 27,  no. 2,  pp.768 -777 1991 

14. E. Barbisio , F. Fiorillo and C. Ragusa  "Predicting loss in magnetic steels under arbitrary induction waveform and with minor hysteresis loops",  IEEE Trans. Magn.,  vol. 40,  no. 4,  pp.1810 -1819 2004 

15. S. D. Calverley , G. W. Jewell and R. J. Saunders  "Prediction and measurement of core losses in a high-speed switched-reluctance machine",  IEEE Trans. Magn.,  vol. 41,  no. 11,  pp.4288 -4298 2005 

16. M. L. Hodgdon  "Mathematical theory and calculations of magnetic hysteresis curves",  IEEE Trans. Magn.,  vol. 24,  no. 6,  pp.3120 -3122 1988 

17. F. Preisach  "Uber die magnetische nachwrikung",  Zeitschrift Phys.,  vol. B 94,  no. 5/6,  pp.277 -302 1935 

18. I. D. Mayergoyz  Mathematical Models of Hysteresis,  1991 :Springer-Verlag 

19. D. C. Jiles and D. L. Atherton  "Theory of ferromagnetic hysteresis",  J. Magn. Magn. Mater.,  vol. 61,  no. 1/2,  pp.48 -60 1986 

20. H. Hauser  "Energetic model of ferromagnetic hysteresis: Isotropic magnetization",  J. Appl. Phys.,  vol. 96,  no. 5,  pp.2753 -2767 2004 

21. Y. Zhang , P. Pillay , M. Ibrahim and M. Cheng  "Magnetic characteristics and core losses in machine laminations: High frequency loss prediction from low frequency measurements",  Conf. Rec. IEEE IAS Annu. Meeting,  vol. 48,  no. 2,  pp.623 -629 2012 

22. L. R. Dupre , O. Bottauscio , M. Chiampi , M. Repetto and J. A. A. Melkebeek  "Modelling of electromagnetic phenomena in soft magnetic materials under unidirectional time periodic flux excitations",  IEEE Trans. Magn.,  vol. 35,  no. 5,  pp.4171 -4184 1999 

23. S. Zirka , Y. I. Moroz , P. Marketos and A. J. Moses  "Loss separation in nonoriented electrical steels",  IEEE Trans. Magn.,  vol. 46,  no. 2,  pp.286 -289 2010 

24. P. Rasilo , E. Dlala , K. Fonteyn , J. Pippuri , A. Belahcen and A. Arkkio  "Model of laminated ferromagnetic cores for loss prediction in electrical machines",  IET Elect. Power Appl.,  vol. 5,  no. 7,  pp.580 -588 2011