Abaqus. (2010). "Abaqus standard user’s manual, 6.11." Dassault Systèmes.
AISC (2010a). "Specifications for Structural Steel Buildings, ANSI/AISC 360-10", American Institute of Steel Construction, Chicago, IL
Alpsten, G. A. (1972a). "Prediction of thermal residual stresses in hot-rolled plates and shapes of structural steel." 9th IABSE Congress, Final Report, Amsterdam, The Netherlands, pp. 1- 13. 
Alpsten, G. A. (1972b)."Residual stresses, yield strength and column strength of hot-rolled and roller-straightened steel shapes." Colloquium on Column Strength, Paris, France, pp. 39-59.
Alpsten, G., and Tall, L. (1970). "Residual stresses in heavy welded shapes." Welding Journal Research Supplement, 49(3), 93s- 105s.
Amin Mohebkhah, and Chegeni, B. (2012). "Local–global interactive buckling of built-up I-beam sections." Thin-Walled Structures, 33-37.
AS 4100. (1998)."Standards Association of Australia", Sydney, Australia.
Baker, K. A. (1984). "Resistance Factors for Laterally Unsupported." Can. J. Civil Eng., 1008 1019.
Beedle, L. S., and Tall, L. (1960). "Basic column strength." ASCE Journal of the Structural Division, 86(ST7): 139- 173.
Bjorhovde, R. (1972). "Deterministic and Probabilistic Approaches to the Strength of Steel Columns." Ph.D. dissertation, Lehigh University, Bethlehem, PA.
Bleich, F. (1952), "Buckling Strength of Metal Structures," McGraw-Hill, New York.
Canadian Standards Association, (CSA). (2014). "Limit States Design of Steel Structures." CAN/CSA-S16-14: Toronto, Ontario, Canada.
Chernenko, D. E., and Kennedy, D. J. (1991). "An Analysis of the Performance of Welded Wide Flange Columns." Can. J. Civil Eng., Vol. 18, pp. 537–555.
Cook, R. D. and D. S. Malkus (2002). "Concepts and applications of finite element analysis." Ed. by W. Anderson. John Wiley & Sons Inc.
Dibley, J. E. (1969). "Lateral Torsional Buckling of I-Sections in Grade 55 Steel." Proc. Inst. Civil Eng., 599–627.
Dux, P.F., and Kitipornchai, S. (1983), "Inelastic Beam Buckling Experiments," Journal of Constructional Steel Research, Vol. 3, No. 1, 3-9
ECCS (1984)."Ultimate limit state calculation of sway frames with rigid joints". Technical Committee 8 33, p. 20
Estuar, F. R., and Tall, L. (1963)."Experimental investigation of welded built-up columns." Welding Journal, Research Supplement, 42(4): 164s- 176s.
Eurocode 3. (2005). EN 1993-1-1 Eurocode 3: "Design of steel structures - Part 1–1: general rules and rules for buildings." European Committee for Standardization (CEN), Brussels, Belgium
Fukumoto Y. (1976)."Lateral buckling of welded beams and girders in HT 80 steel." IABSE congress report, 403-408
Fukumoto, Y., and Itoh, Y. (1981)."Statistical Study of Experiments on Welded Beams." Journal of Structural Division, ASCE, 107 (ST1): 89-103
Fukumoto, Y., and Kubo, M. (1977)."An experimental review of lateral buckling of beams and girders." International Colloquium on Stability of Structures Under static and Dynamic Loads, ASCE, 541-562.
Fukumoto, Y., Itoh, Y., and Kubo, M. (1980)."Strength Variation of Laterally Unsupported Beams." Journal of Structural Division, ASCE, 106 (ST1): 165-181.
Galambos, T. (1968)."Structural Members and Frames." Prentice-Hall, Upper Saddle River, N.J.
Greiner, R. and Kaim, P. (2001)."Comparison of LT-Buckling Design Curves with Test Results."ECCS TC 8 Report 23. European Convention for Constructional Steelwork, Brussels, Belgium
Hassan, R. (2013)."Distortional Lateral Torsional Buckling Analysis for Beams of Wide Flange Cross-Sections." M.A.Sc dissertation, Department of Civil Engineering, Faculty of Engineering, University of Ottawa, Canada.
Helwig, T. A., Frank, K. H., and Yura, J. A. (1997)."Lateral-torsional Buckling of Singly Symmetric I -Beams." Journal of Structural Engineering 123(9), 1172-1179.
Hibbitt Karlsson, Sorensen. (2011)."ABAQUS/Standard User's Manual. Version 6.11." RI: HKS Inc., Pawtucket; 2011.
Kennedy, D.J.L., and Gad Aly, M. (1980). "Limit states design of steel structures-performance factors." Canadian Journal of Civil Engineering, 7(1): 45–77.
Kim, Y.D. (2010). "Behavior and Design of Metal Building Frames Using General Prismatic and Web-Tapered Steel I-Section Members." Doctoral Dissertation, School of Civil and Environmental Engineering, Georgia Institute of Technology, Atlanta, GA.
Kirby, P. A. and D. A. Nethercot (1979)."Design for structural stability." Ed. by M. R. Horne. Granada Publishing Limited
MacPhedran, I., and Grondin, G. (2011)."A Proposed Simplified Canadian Beam Design." Can. J. Civ. Eng. 38: 141-143.
McFalls, R. K., and Tall, L. (1969)."A study of welded columns manufactured from flame-cut plates." Welding Journal Research Supplement, 48(4), 141s- 153s.
Nagaraja Rao, N. R., and Tall, L. (1961)." Residual stresses in welded plates." Welding Journal, Research Supplement, 40(10): 468s -480s.
Nagaraja Rao, N. R., Estuar, F. R., and Tall, L. (1964)." Residual stresses in welded shapes." Welding Journal, Research Supplement, 43(7): 294s -306s.
NCCI (2008)."Elastic critical moment for lateral torsional buckling." SN003a-EN-EU. Steel Construction Institute. Berkshire
Nethercot, D. (1974)."Buckling of welded beams and girders."IABSE publications, 107-121.
Nethercot, D. A. and K. C. Rockey (1971)."A unified approach to the elastic lateral buckling of beams". The structural engineer 49, pp. 321–330
Peraza, D. B. (Feb. 2008). Avoiding Structural failures during construction. url: http://www.structuremag.org/article.aspx?articleID=527
Saatcioglu M, Humar J (2003). "Dynamic analysis of buildings for earthquake resistant design." Can J Civ Eng;30:338–59.
Salvadori, M. G. (1955). "Lateral Buckling of I-beams." American Society of Civil Engineers 120, pp. 1165–1177
Sharifi, S. T. (2015). "Inelastic lateral-torsional buckling capacity of corroded web opening steel beams using artificial neural networks." The IES Journal Part A: Civil & Structural Engineering, 24-40.
Simulia (2013). "ABAQUS/Standard Version 6.12-1", Simulia, Inc. Providence, RI
Subramanian L. and White D.W. (2015), "Evaluation of Lateral Torsional Buckling Resistance Equations in AISC and AASHTO." Proceedings of the Annual Stability Conference, Structural Stability Research Council. 
Tall, L. (1964b). "Residual stresses in welded plates."Welding Journal, Research Supplement, 43(1): 10s-23s.
Timoshenko, S. P., and Gere, J. M. (1961). "Theory of Elastic Stability, 2nd ed." McGraw-Hill, New York
Trahair, N. S. (1993). "Flexural-Torsional buckling of structures." CRC Press, Boca Raton, FL.
Vlasov, V. Z. (1961). "Thin- Walled Elastic Beams." Israel Program for Scientific Translations, Jerusalem
Wong, E., and Driver, R.G., (2010). "Critical evaluation of equivalent moment factor procedures for laterally unsupported beams." Engineering Journal, AISC, 2010(Q1). pp. 1–20
Xiao, Q. (2014, April). "Lateral Torsional Buckling of Wood Beams." M.A.Sc dissertation, Departments of Civil Engineering, University of Ottawa, Canada
Ziemian, Ronald D., Editor. (2010). "Guide to Stability Design Criterion for Metal Structures."Hoboken, New Jersy: John Wiley & Sons, Inc.