[1]	Word Health Organization (WHO), “Burden of disease from the joint effects of Household and Ambient Air Pollution for 2012.” 2014.
[2]	F. Farrokhian and M. Bahri, “Study of the Effects of Climatic Parameters on the Pollutants CO, SO2, NOx, and O3 through Regression Models,” Bull. Env. Pharmacol. Life Sci, vol. 4, pp. 139–145, 2014.
[3]	World Bank and Institute for Health Metrics and Evaluation, “The Cost of Air Pollution:  Strengthening the Economic Case for Action.” Washington, DC: World Bank. License: Creative Commons Attribution CC BY 3.0 IGO, 2016.
[4]	X. Fan, T. L. Zhu, M. Y. Wang, and X. M. Li, “Removal of low-concentration BTX in air using a combined plasma catalysis system,” Chemosphere, vol. 75, no. 10, pp. 1301–1306, 2009.
[5]	D. Farhanian, F. Haghighat, C.-S. Lee, and N. Lakdawala, “Impact of Design Parameters on the Performance of Ultraviolet Photocatalytic Oxidation Air Cleaner,” Building and Environment, 2013.
[6]	F. I. Khan and A. Kr Ghoshal, “Removal of volatile organic compounds from polluted air,” Journal of Loss Prevention in the Process Industries, vol. 13, no. 6, pp. 527–545, 2000.
[7]	W. P. L. Carter, J. A. Pierce, D. Luo, and I. L. Malkina, “Environmental chamber study of maximum incremental reactivities of volatile organic compounds,” Atmospheric Environment, vol. 29, no. 18, pp. 2499–2511, 1995.
[8]	P. H. Fischer et al., “Traffic-related differences in outdoor and indoor concentrations of particles and volatile organic compounds in Amsterdam,” Atmospheric Environment, vol. 34, no. 22, pp. 3713–3722, 2000.
[9]	H. Guo, S. C. Lee, L. Y. Chan, and W. M. Li, “Risk assessment of exposure to volatile organic compounds in different indoor environments,” Environmental Research, vol. 94, no. 1, pp. 57–66, 2004.
[10]	Y. Zhao, S. Wang, K. Aunan, H. Martin Seip, and J. Hao, “Air pollution and lung cancer risks in China—a meta-analysis,” Science of the total environment, vol. 366, no. 2, pp. 500–513, 2006.
[11]	L. Mølhave, B. Bach, and O. F. Pedersen, “Human reactions to low concentrations of volatile organic compounds,” Environment International, vol. 12, no. 1, pp. 167–175, 1986.
[12]	D. W. VanOsdell, M. K. Owen, L. B. Jaffe, and L. E. Sparks, “VOC removal at low contaminant concentrations using granular activated carbon,” Journal of the Air & Waste Management Association, vol. 46, no. 9, pp. 883–890, 1996.
[13]	L. Zhong, F. Haghighat, P. Blondeau, and J. Kozinski, “Modeling and physical interpretation of photocatalytic oxidation efficiency in indoor air applications,” Building and Environment, vol. 45, no. 12, pp. 2689–2697, 2010.
[14]	F. Haghighat, C. S. Lee, B. Pant, G. Bolourani, N. Lakdawala, and A. Bastani, “Evaluation of various activated carbons for air cleaning–Towards design of immune and sustainable buildings,” Atmospheric Environment, vol. 42, no. 35, pp. 8176–8184, 2008.
[15]	A. Bastani, C. S. Lee, F. Haghighat, C. Flaherty, and N. Lakdawala, “Assessing the performance of air cleaning devices–A full-scale test method,” Building and Environment, vol. 45, no. 1, pp. 143–149, 2010.
[16]	X. S. Zhao, Q. Ma, and G. (Max) Lu, “VOC removal: comparison of MCM-41 with hydrophobic zeolites and activated carbon,” Energy & fuels, vol. 12, no. 6, pp. 1051–1054, 1998.
[17]	J. Zhao and X. Yang, “Photocatalytic oxidation for indoor air purification: a literature review,” Building and Environment, vol. 38, no. 5, pp. 645–654, 2003.
[18]	S. Wang, H. M. Ang, and M. O. Tade, “Volatile organic compounds in indoor environment and photocatalytic oxidation: State of the art,” Environment international, vol. 33, no. 5, pp. 694–705, 2007.
[19]	J. Mo, Y. Zhang, Q. Xu, J. J. Lamson, and R. Zhao, “Photocatalytic purification of volatile organic compounds in indoor air: A literature review,” Atmospheric environment, vol. 43, no. 14, pp. 2229–2246, 2009.
[20]	A. T. Hodgson, H. Destaillats, D. P. Sullivan, and W. J. Fisk, “Performance of ultraviolet photocatalytic oxidation for indoor air cleaning applications,” Indoor air, vol. 17, no. 4, pp. 305–316, 2007.
[21]	W. A. Jacoby et al., “Heterogeneous photocatalysis for control of volatile organic compounds in indoor air,” Journal of the Air & Waste Management Association, vol. 46, no. 9, pp. 891–898, 1996.
[22]	D. Farhanian and F. Haghighat, “Photocatalytic oxidation air cleaner: Identification and quantification of by-products,” Building and Environment, vol. 72, pp. 34–43, 2014.
[23]	S. B. Kim and S. C. Hong, “Kinetic study for photocatalytic degradation of volatile organic compounds in air using thin film TiO2 photocatalyst,” Applied Catalysis B: Environmental, vol. 35, no. 4, pp. 305–315, 2002.
[24]	A. K. Boulamanti, C. A. Korologos, and C. J. Philippopoulos, “The rate of photocatalytic oxidation of aromatic volatile organic compounds in the gas-phase,” Atmospheric Environment, vol. 42, no. 34, pp. 7844–7850, 2008.
[25]	F. Holzer, U. Roland, and F. D. Kopinke, “Combination of non-thermal plasma and heterogeneous catalysis for oxidation of volatile organic compounds:: Part 1. Accessibility of the intra-particle volume,” Applied Catalysis B: Environmental, vol. 38, no. 3, pp. 163–181, 2002.
[26]	W. Mista and R. Kacprzyk, “Decomposition of toluene using non-thermal plasma reactor at room temperature,” Catalysis Today, vol. 137, no. 2, pp. 345–349, 2008.
[27]	U. Roland, F. Holzer, and F. D. Kopinke, “Combination of non-thermal plasma and heterogeneous catalysis for oxidation of volatile organic compounds: Part 2. Ozone decomposition and deactivation of γ-Al2O3,” Applied catalysis B: environmental, vol. 58, no. 3, pp. 217–226, 2005.
[28]	Y. H. Song, S. J. Kim, K. I. Choi, and T. Yamamoto, “Effects of adsorption and temperature on a nonthermal plasma process for removing VOCs,” Journal of electrostatics, vol. 55, no. 2, pp. 189–201, 2002.
[29]	M. Sharma, R. K. Vyas, and K. Singh, “A review on reactive adsorption for potential environmental applications,” Adsorption, vol. 19, no. 1, pp. 161–188, 2013.
[30]	K. Inoue, H. Okano, Y. Yamagata, K. Muraoka, and Y. Teraoka, “Performance tests of newly developed adsorption/plasma combined system for decomposition of volatile organic compounds under continuous flow condition,” Journal of Environmental Sciences, vol. 23, no. 1, pp. 139–144, 2011.
[31]	M. Magureanu, N. B. Mandache, P. Eloy, E. M. Gaigneaux, and V. I. Parvulescu, “Plasma-assisted catalysis for volatile organic compounds abatement,” Applied catalysis B: environmental, vol. 61, no. 1, pp. 12–20, 2005.
[32]	J. Van Durme, J. Dewulf, K. Demeestere, C. Leys, and H. Van Langenhove, “Post-plasma catalytic technology for the removal of toluene from indoor air: Effect of humidity,” Applied Catalysis B: Environmental, vol. 87, no. 1–2, pp. 78–83, 2009.
[33]	T. Zhu, J. Li, W. Liang, and Y. Jin, “Synergistic effect of catalyst for oxidation removal of toluene,” Journal of hazardous materials, vol. 165, no. 1–3, pp. 1258–1260, 2009.
[34]	Z. Zhao, X. Li, and Z. Li, “Adsorption equilibrium and kinetics of p-xylene on chromium-based metal organic framework MIL-101,” Chemical Engineering Journal, vol. 173, no. 1, pp. 150–157, 2011.
[35]	Z. Zhao, X. Li, S. Huang, Q. Xia, and Z. Li, “Adsorption and diffusion of benzene on chromium-based metal organic framework MIL-101 synthesized by microwave irradiation,” Industrial & Engineering Chemistry Research, vol. 50, no. 4, pp. 2254–2261, 2011.
[36]	W.-G. Shim et al., “Adsorption and thermodesorption characteristics of benzene in nanoporous metal organic framework MOF-5,” Advanced Powder Technology, 2011.
[37]	K. M. Choi, K. Na, G. A. Somorjai, and O. M. Yaghi, “Chemical environment control and enhanced catalytic performance of platinum nanoparticles embedded in nanocrystalline metal–organic frameworks,” Journal of the American Chemical Society, vol. 137, no. 24, pp. 7810–7816, 2015.
[38]	Y.-Z. Chen et al., “A seed-mediated approach to the general and mild synthesis of non-noble metal nanoparticles stabilized by a metal–organic framework for highly efficient catalysis,” Materials Horizons, vol. 2, no. 6, pp. 606–612, 2015.
[39]	F. Alvarez, K. Topudurti, M. Keefe, C. Petropoulou, and T. Schlichting, “Field Evaluation of High Voltage Electron Beam Technology for Treating VOC-Contaminated Groundwater Part I: VOC Removals and Treatment Costs,” JOURNAL OF ADVANCED OXIDATION TECHNOLOGIES, vol. 3, pp. 98–106, 1998.
[40]	T. Oda, “Non-thermal plasma processing for environmental protection: decomposition of dilute VOCs in air,” Journal of Electrostatics, vol. 57, no. 3, pp. 293–311, 2003.
[41]	T. Hammer, “Application of plasma technology in environmental techniques,” Contributions to Plasma Physics, vol. 39, no. 5, pp. 441–462, 1999.
[42]	H. Kohno et al., “Destruction of volatile organic compounds used in a semiconductor industry by a capillary tube discharge reactor,” Industry Applications, IEEE Transactions on, vol. 34, no. 5, pp. 953–966, 1998.
[43]	A. Fridman and L. A. Kennedy, Plasma physics and engineering, Second. CRC, 2011.
[44]	J. Heberlein and A. B. Murphy, “Thermal plasma waste treatment,” Journal of Physics D: Applied Physics, vol. 41, p. 053001, 2008.
[45]	J. Heberlein, “New approaches in thermal plasma technology,” Pure and applied chemistry, vol. 74, no. 3, pp. 327–336, 2002.
[46]	D. С. Schram, “The use of thermal plasmas for processing and relevance to environmental use,” Proc. 8th Int. Conf. on Switching Arc Phenomena with satellite Int. Symp. on Electrical Technologies for Environmental Protection, Lodz, Poland, pp. 135–142, 1997.
[47]	E. Pfender, “Thermal plasma technology: Where do we stand and where are we going?,” Plasma Chemistry and Plasma Processing, vol. 19, no. 1, pp. 1–31, 1999.
[48]	K. P. Francke, H. Miessner, and R. Rudolph, “Plasmacatalytic processes for environmental problems,” Catalysis Today, vol. 59, no. 3–4, pp. 411–416, 2000.
[49]	H. H. Kim, “Nonthermal Plasma Processing for Air-Pollution Control: A Historical Review, Current Issues, and Future Prospects,” Plasma Processes and Polymers, vol. 1, no. 2, pp. 91–110, 2004.
[50]	A. M. Vandenbroucke, R. Morent, N. De Geyter, and C. Leys, “Non-thermal plasmas for non-catalytic and catalytic VOC abatement,” Journal of hazardous materials, vol. 195, pp. 30–54, 2011.
[51]	K. Urashima and J. S. Chang, “Removal of volatile organic compounds from air streams and industrial flue gases by non-thermal plasma technology,” Dielectrics and Electrical Insulation, IEEE Transactions on, vol. 7, no. 5, pp. 602–614, 2000.
[52]	U. Kogelschatz, “Dielectric-barrier discharges: Their history, discharge physics, and industrial applications,” Plasma chemistry and plasma processing, vol. 23, no. 1, pp. 1–46, 2003.
[53]	J. O. Chae, V. Demidiouk, M. Yeulash, I. C. Choi, and T. G. Jung, “Experimental study for indoor air control by plasma-catalyst hybrid system,” Plasma Science, IEEE Transactions on, vol. 32, no. 2, pp. 493–497, 2004.
[54]	H. Ma, P. Chen, M. Zhang, X. Lin, and R. Ruan, “Study of SO2 removal using non-thermal plasma induced by dielectric barrier discharge (DBD),” Plasma Chemistry and Plasma Processing, vol. 22, no. 2, pp. 239–254, 2002.
[55]	V. I. Gibalov and G. J. Pietsch, “The development of dielectric barrier discharges in gas gaps and on surfaces,” Journal of Physics D: Applied Physics, vol. 33, p. 2618, 2000.
[56]	U. Kogelschatz, “Filamentary, patterned, and diffuse barrier discharges,” Plasma Science, IEEE Transactions on, vol. 30, no. 4, pp. 1400–1408, 2002.
[57]	R. McAdams, “Prospects for non-thermal atmospheric plasmas for pollution abatement,” Journal of Physics D: Applied Physics, vol. 34, p. 2810, 2001.
[58]	C. Wang and X. He, “Effect of atmospheric pressure dielectric barrier discharge air plasma on electrode surface,” Applied Surface Science, vol. 253, no. 2, pp. 926–929, 2006.
[59]	W. Liang, J. Li, J. Li, and Y. Jin, “Abatement of toluene from gas streams via ferro-electric packed bed dielectric barrier discharge plasma,” Journal of hazardous materials, vol. 170, no. 2, pp. 633–638, 2009.
[60]	A. Ogata, N. Shintani, K. Mizuno, S. Kushiyama, and T. Yamamoto, “Decomposition of benzene using a nonthermal plasma reactor packed with ferroelectric pellets,” Industry Applications, IEEE Transactions on, vol. 35, no. 4, pp. 753–759, 1999.
[61]	U. Roland, F. Holzer, and F. D. Kopinke, “Improved oxidation of air pollutants in a non-thermal plasma,” Catalysis Today, vol. 73, no. 3–4, pp. 315–323, 2002.
[62]	B. Eliasson and U. Kogelschatz, “Nonequilibrium volume plasma chemical processing,” Plasma Science, IEEE Transactions on, vol. 19, no. 6, pp. 1063–1077, 1991.
[63]	M. B. Chang and C. C. Chang, “Destruction and removal of toluene and MEK from gas streams with silent discharge plasmas,” AIChE journal, vol. 43, no. 5, pp. 1325–1330, 1997.
[64]	Y. Wan, X. Fan, and T. Zhu, “Removal of low-concentration formaldehyde in air by DC corona discharge plasma,” Chemical Engineering Journal, vol. 171, no. 1, pp. 314–319, 2011.
[65]	A. Mizuno et al., “Indoor air cleaning using a pulsed discharge plasma,” Industry Applications, IEEE Transactions on, vol. 35, no. 6, pp. 1284–1288, 1999.
[66]	Y. Liang et al., “Rapid Inactivation of Biological Species in the Air using Atmospheric Pressure Nonthermal Plasma,” Environmental science & technology, vol. 46, no. 6, pp. 3360–3368, 2012.
[67]	G. Fridman et al., “Comparison of Direct and Indirect Effects of Non-Thermal Atmospheric-Pressure Plasma on Bacteria,” Plasma Processes and Polymers, vol. 4, no. 4, pp. 370–375, 2007.
[68]	J. H. Park, J. H. Byeon, K. Y. Yoon, and J. Hwang, “Lab-scale test of a ventilation system including a dielectric barrier discharger and UV-photocatalyst filters for simultaneous removal of gaseous and particulate contaminants,” Indoor air, vol. 18, no. 1, pp. 44–50, 2008.
[69]	J. Van Durme, J. Dewulf, W. Sysmans, C. Leys, and H. Van Langenhove, “Efficient toluene abatement in indoor air by a plasma catalytic hybrid system,” Applied Catalysis B: Environmental, vol. 74, no. 1–2, pp. 161–169, 2007.
[70]	K. Urashima, J. S. Chang, and T. Ito, “Destruction of volatile organic compounds in air by a superimposed barrier discharge plasma reactor and activated carbon filter hybrid system,” presented at the Industry Applications Conference, Thirty-Second IAS Annual Meeting, IAS’97, New Orleans, US, 1997, vol. 3, pp. 1969–1974.
[71]	V. Demidiouk, S. I. Moon, and J. O. Chae, “Toluene and butyl acetate removal from air by plasma-catalytic system,” Catalysis Communications, vol. 4, no. 2, pp. 51–56, 2003.
[72]	M. Sugasawa, G. Annadurai, and S. Futamura, “Reaction Behavior of Toluene–Dichloromethane Mixture in Nonthermal Plasma,” Industry Applications, IEEE Transactions on, vol. 45, no. 4, pp. 1499–1505, 2009.
[73]	H. Quoc An, T. Pham Huu, T. Le Van, J. M. Cormier, and A. Khacef, “Application of atmospheric non thermal plasma-catalysis hybrid system for air pollution control: Toluene removal,” Catalysis Today, vol. 176, no. 1, pp. 474–477, 2011.
[74]	S. Delagrange, L. Pinard, and J.-M. Tatibouët, “Combination of a non-thermal plasma and a catalyst for toluene removal from air: Manganese based oxide catalysts,” Applied Catalysis B: Environmental, vol. 68, no. 3–4, pp. 92–98, 2006.
[75]	G. Yu-fang, Y. Dai-qi, T. Ya-feng, and C. Ke-fu, “Humidity effect on toluene decomposition in a wire-plate dielectric barrier discharge reactor,” Plasma chemistry and plasma processing, vol. 26, no. 3, pp. 237–249, 2006.
[76]	H. Wang, D. Li, Y. Wu, J. Li, and G. Li, “Removal of four kinds of volatile organic compounds mixture in air using silent discharge reactor driven by bipolar pulsed power,” Journal of electrostatics, vol. 67, no. 4, pp. 547–553, 2009.
[77]	J. Van Durme, J. Dewulf, W. Sysmans, C. Leys, and H. Van Langenhove, “Abatement and degradation pathways of toluene in indoor air by positive corona discharge,” Chemosphere, vol. 68, no. 10, pp. 1821–1829, 2007.
[78]	H. Einaga, T. Ibusuki, and S. Futamura, “Performance evaluation of a hybrid system comprising silent discharge plasma and manganese oxide catalysts for benzene decomposition,” Industry Applications, IEEE Transactions on, vol. 37, no. 5, pp. 1476–1482, 2001.
[79]	V. Demidiouk and J. O. Chae, “Decomposition of volatile organic compounds in plasma-catalytic system,” Plasma Science, IEEE Transactions on, vol. 33, no. 1, pp. 157–161, 2005.
[80]	A. E. Wallis, J. C. Whitehead, and K. Zhang, “The removal of dichloromethane from atmospheric pressure nitrogen gas streams using plasma-assisted catalysis,” Applied Catalysis B: Environmental, vol. 74, no. 1–2, pp. 111–116, 2007.
[81]	H. L. Chen, H. M. Lee, S. H. Chen, M. B. Chang, S. J. Yu, and S. N. Li, “Removal of volatile organic compounds by single-stage and two-stage plasma catalysis systems: a review of the performance enhancement mechanisms, current status, and suitable applications,” Environmental science & technology, vol. 43, no. 7, pp. 2216–2227, 2009.
[82]	H. H. Kim, A. Ogata, and S. Futamura, “Effect of different catalysts on the decomposition of VOCs using flow-type plasma-driven catalysis,” Plasma Science, IEEE Transactions on, vol. 34, no. 3, pp. 984–995, 2006.
[83]	A. M. Harling, V. Demidyuk, S. J. Fischer, and J. C. Whitehead, “Plasma-catalysis destruction of aromatics for environmental clean-up: Effect of temperature and configuration,” Applied Catalysis B: Environmental, vol. 82, no. 3, pp. 180–189, 2008.
[84]	X. Fan, T. Zhu, Y. Sun, and X. Yan, “The roles of various plasma species in the plasma and plasma-catalytic removal of low-concentration formaldehyde in air,” Journal of hazardous materials, vol. 196, pp. 380–385, 2011.
[85]	V. I. Parvulescu, M. Magureanu, and P. Lukes, Plasma Chemistry and Catalysis in Gases and Liquids. John Wiley & Sons, 2012.
[86]	A. Rousseau, O. Guaitella, J. Röpcke, L. V. Gatilova, and Y. A. Tolmachev, “Combination of a pulsed microwave plasma with a catalyst  for acetylene oxidation,” Applied Physics Letters, vol. 85, no. 12, p. 2199, 2004.
[87]	D. Z. Zhao, X. S. Li, C. Shi, H. Y. Fan, and A. M. Zhu, “Low-concentration formaldehyde removal from air using a cycled storage–discharge (CSD) plasma catalytic process,” Chemical Engineering Science, vol. 66, no. 17, pp. 3922–3929, 2011.
[88]	A. Ogata, H. Einaga, H. Kabashima, S. Futamura, S. Kushiyama, and H. H. Kim, “Effective combination of nonthermal plasma and catalysts for decomposition of benzene in air,” Applied Catalysis B: Environmental, vol. 46, no. 1, pp. 87–95, 2003.
[89]	A. Ogata, K. Yamanouchi, K. Mizuno, S. Kushiyama, and T. Yamamoto, “Oxidation of dilute benzene in an alumina hybrid plasma reactor at atmospheric pressure,” Plasma chemistry and plasma processing, vol. 19, no. 3, pp. 383–394, 1999.
[90]	S. M. Oh, H. H. Kim, A. Ogata, H. Einaga, S. Futamura, and D. W. Park, “Effect of zeolite in surface discharge plasma on the decomposition of toluene,” Catalysis letters, vol. 99, no. 1, pp. 101–104, 2005.
[91]	T. Oda, K. Yamaji, and T. Takahashi, “Decomposition of dilute trichloroethylene by nonthermal plasma processing-gas flow rate, catalyst, and ozone effect,” Industry Applications, IEEE Transactions on, vol. 40, no. 2, pp. 430–436, 2004.
[92]	H. B. Huang, D. Q. Ye, M. L. Fu, and F. D. Feng, “Contribution of UV light to the decomposition of toluene in dielectric barrier discharge plasma/photocatalysis system,” Plasma Chemistry and Plasma Processing, vol. 27, no. 5, pp. 577–588, 2007.
[93]	H. Einaga and S. Futamura, “Catalytic oxidation of benzene with ozone over alumina-supported manganese oxides,” Journal of Catalysis, vol. 227, no. 2, pp. 304–312, 2004.
[94]	H. Einaga and S. Futamura, “Oxidation behavior of cyclohexane on alumina-supported manganese oxides with ozone,” Applied Catalysis B: Environmental, vol. 60, no. 1, pp. 49–55, 2005.
[95]	T. Hammer, T. Kappes, and M. Baldauf, “Plasma catalytic hybrid processes: gas discharge initiation and plasma activation of catalytic processes,” Catalysis today, vol. 89, no. 1, pp. 5–14, 2004.
[96]	F. Holzer, U. Roland, and F. D. Kopinke, “Combination of non-thermal plasma and heterogeneous catalysis for oxidation of volatile organic compounds:: Part 1. Accessibility of the intra-particle volume,” Applied Catalysis B: Environmental, vol. 38, no. 3, pp. 163–181, 2002.
[97]	J. Van Durme, J. Dewulf, C. Leys, and H. Van Langenhove, “Combining non-thermal plasma with heterogeneous catalysis in waste gas treatment: A review,” Applied Catalysis B: Environmental, vol. 78, no. 3–4, pp. 324–333, 2008.
[98]	H. Einaga and S. Futamura, “Catalytic oxidation of benzene with ozone over Mn ion-exchanged zeolites,” Catalysis Communications, vol. 8, no. 3, pp. 557–560, 2007.
[99]	H. L. Chen, H. M. Lee, S. H. Chen, Y. Chao, and M. B. Chang, “Review of plasma catalysis on hydrocarbon reforming for hydrogen production—Interaction, integration, and prospects,” Applied Catalysis B: Environmental, vol. 85, no. 1, pp. 1–9, 2008.
[100]	Y. F. Guo, D. Q. Ye, K. F. Chen, J. C. He, and W. L. Chen, “Toluene decomposition using a wire-plate dielectric barrier discharge reactor with manganese oxide catalyst in situ,” Journal of Molecular Catalysis A: Chemical, vol. 245, no. 1, pp. 93–100, 2006.
[101]	C. Liu et al., “Plasma application for more environmentally friendly catalyst preparation,” Pure and applied chemistry, vol. 78, no. 6, pp. 1227–1238, 2006.
[102]	D. Cheng and X. Zhu, “Reduction of Pd/HZSM-5 using oxygen glow discharge plasma for a highly durable catalyst preparation,” Catalysis Letters, vol. 118, no. 3, pp. 260–263, 2007.
[103]	Y. Guo, D. Ye, K. Chen, and J. He, “Toluene removal by a DBD-type plasma combined with metal oxides catalysts supported by nickel foam,” Catalysis today, vol. 126, no. 3–4, pp. 328–337, 2007.
[104]	C. Subrahmanyam, M. Magureanu, A. Renken, and L. Kiwi-Minsker, “Catalytic abatement of volatile organic compounds assisted by non-thermal plasma: Part 1. A novel dielectric barrier discharge reactor containing catalytic electrode,” Applied Catalysis B: Environmental, vol. 65, no. 1, pp. 150–156, 2006.
[105]	A. E. Wallis, J. C. Whitehead, and K. Zhang, “The removal of dichloromethane from atmospheric pressure air streams using plasma-assisted catalysis,” Applied Catalysis B: Environmental, vol. 72, no. 3, pp. 282–288, 2007.
[106]	S. Futamura, A. Zhang, H. Einaga, and H. Kabashima, “Involvement of catalyst materials in nonthermal plasma chemical processing of hazardous air pollutants,” Catalysis Today, vol. 72, no. 3–4, pp. 259–265, 2002.
[107]	H. H. Kim, A. Ogata, and S. Futamura, “Oxygen partial pressure-dependent behavior of various catalysts for the total oxidation of VOCs using cycled system of adsorption and oxygen plasma,” Applied Catalysis B: Environmental, vol. 79, no. 4, pp. 356–367, 2008.
[108]	M. Magureanu et al., “In situ study of ozone and hybrid plasma Ag-Al catalysts for the oxidation of toluene: Evidence of the nature of the active sites,” Applied Catalysis B: Environmental, vol. 104, no. 1–2, pp. 84–90, 2011.
[109]	A. Maciuca, C. Batiot-Dupeyrat, and J.-M. Tatibouët, “Synergetic effect by coupling photocatalysis with plasma for low VOCs concentration removal from air,” Applied Catalysis B: Environmental, vol. Volume 125, pp. 432–438, 2012.
[110]	T. Sano, N. Negishi, E. Sakai, and S. Matsuzawa, “Contributions of photocatalytic/catalytic activities of TiO2 andγ-Al2O3 in nonthermal plasma on oxidation of acetaldehyde and CO,” Journal of Molecular Catalysis A: Chemical, vol. 245, no. 1, pp. 235–241, 2006.
[111]	H. Huang and D. Ye, “Combination of photocatalysis downstream the non-thermal plasma reactor for oxidation of gas-phase toluene,” Journal of hazardous materials, vol. 171, no. 1, pp. 535–541, 2009.
[112]	S. Chavadej, K. Saktrakool, P. Rangsunvigit, L. L. Lobban, and T. Sreethawong, “Oxidation of ethylene by a multistage corona discharge system in the absence and presence of Pt/TiO2,” Chemical engineering journal, vol. 132, no. 1, pp. 345–353, 2007.
[113]	C. Ayrault et al., “Oxidation of 2-heptanone in air by a DBD-type plasma generated within a honeycomb monolith supported Pt-based catalyst,” Catalysis today, vol. 89, no. 1, pp. 75–81, 2004.
[114]	J. Karuppiah, L. Sivachandiran, R. Karvembu, and C. Subrahmanyam, “Catalytic nonthermal plasma reactor for the abatement of low concentrations of isopropanol,” Chemical Engineering Journal, vol. 165, no. 1, pp. 194–199, 2010.
[115]	X. Fan, T. Zhu, Y. Wan, and X. Yan, “Effects of humidity on the plasma-catalytic removal of low-concentration BTX in air,” Journal of hazardous materials, vol. 180, no. 1, pp. 616–621, 2010.
[116]	H.-H. Kim, S.-M. Oh, A. Ogata, and S. Futamura, “Decomposition of Gas-Phase Benzene Using Plasma Driven Catalyst Reactor: Complete Oxidation of Adsorbed Benzene Using Oxygen Plasma,” Journal of Advanced Oxidation Technologies, vol. 8, no. 2, pp. 226–233, 2005.
[117]	H. Y. Fan, C. Shi, X. S. Li, D. Z. Zhao, Y. Xu, and A. M. Zhu, “High-efficiency plasma catalytic removal of dilute benzene from air,” Journal of Physics D: Applied Physics, vol. 42, no. 22, p. 225105, 2009.
[118]	C. Shi, B. Chen, X. Li, M. Crocker, Y. Wang, and A. Zhu, “Catalytic formaldehyde removal by ‘storage-oxidation’ cycling process over supported silver catalysts,” Chemical Engineering Journal, vol. 200–202, pp. 729–737, 2012.
[119]	Y.-H. Chu et al., “Preparation of mesoporous silica fiber matrix for VOC removal,” Catalysis today, vol. 74, no. 3, pp. 249–256, 2002.
[120]	H. Y. Fan et al., “Plasma Catalytic Oxidation of Stored Benzene in a Cycled Storage-Discharge (CSD) Process: Catalysts, Reactors and Operation Conditions,” Plasma Chemistry and Plasma Processing, vol. 31, no. 6, pp. 799–810, 2011.
[121]	D. Das, V. Gaur, and N. Verma, “Removal of volatile organic compound by activated carbon fiber,” Carbon, vol. 42, no. 14, pp. 2949–2962, 2004.
[122]	D. Britt, D. Tranchemontagne, and O. M. Yaghi, “Metal-organic frameworks with high capacity and selectivity for harmful gases,” Proceedings of the National Academy of Sciences, vol. 105, no. 33, pp. 11623–11627, 2008.
[123]	M. T. Luebbers, T. Wu, L. Shen, and R. I. Masel, “Trends in the Adsorption of Volatile Organic Compounds in a Large-Pore Metal- Organic Framework, IRMOF-1,” Langmuir, vol. 26, no. 13, pp. 11319–11329, 2010.
[124]	H. Qu et al., “Structures and photocatalytic activities of metal-organic frameworks derived from rigid aromatic dicarboxylate acids and flexible imidazole-based linkers,” Inorganic Chemistry Communications, vol. 14, no. 9, pp. 1347–1351, 2011.
[125]	S. Galli et al., “Adsorption of harmful organic vapors by flexible hydrophobic bis-pyrazolate based MOFs,” Chemistry of Materials, vol. 22, no. 5, pp. 1664–1672, 2010.
[126]	P. Lama, A. Aijaz, S. Neogi, L. J. Barbour, and P. K. Bharadwaj, “Microporous La (III) Metal- Organic Framework Using a Semirigid Tricarboxylic Ligand: Synthesis, Single-Crystal to Single-Crystal Sorption Properties, and Gas Adsorption Studies,” Crystal Growth & Design, vol. 10, no. 8, pp. 3410–3417, 2010.
[127]	J. Juan-Alcañiz, J. Gascon, and F. Kapteijn, “Metal–organic frameworks as scaffolds for the encapsulation of active species: state of the art and future perspectives,” Journal of Materials Chemistry, vol. 22, no. 20, pp. 10102–10118, 2012.
[128]	A. A. Adeyemo, I. O. Adeoye, and O. S. Bello, “Metal organic frameworks as adsorbents for dye adsorption: overview, prospects and future challenges,” Toxicological & Environmental Chemistry, vol. 94, no. 10, pp. 1846–1863, 2012.
[129]	R. Sabouni, H. Kazemian, and S. Rohani, “Microwave Synthesis of the CPM-5 Metal Organic Framework,” Chemical Engineering & Technology, vol. 35, no. 6, pp. 1085–1092, 2012.
[130]	Y. Liu, Z. Ng, E. A. Khan, H.-K. Jeong, C. Ching, and Z. Lai, “Synthesis of continuous MOF-5 membranes on porous α-alumina substrates,” Microporous and Mesoporous Materials, vol. 118, no. 1, pp. 296–301, 2009.
[131]	J. Lee, O. K. Farha, J. Roberts, K. A. Scheidt, S. T. Nguyen, and J. T. Hupp, “Metal–organic framework materials as catalysts,” Chemical Society Reviews, vol. 38, no. 5, pp. 1450–1459, 2009.
[132]	A. Dhakshinamoorthy, M. Alvaro, and H. Garcia, “Commercial metal–organic frameworks as heterogeneous catalysts,” Chemical Communications, vol. 48, no. 92, pp. 11275–11288, 2012.
[133]	L. Alaerts, M. Maes, P. A. Jacobs, J. F. Denayer, and D. E. De Vos, “Activation of the metal–organic framework MIL-47 for selective adsorption of xylenes and other difunctionalized aromatics,” Physical Chemistry Chemical Physics, vol. 10, no. 20, pp. 2979–2985, 2008.
[134]	J. Gascon, U. Aktay, M. D. Hernandez-Alonso, G. P. van Klink, and F. Kapteijn, “Amino-based metal-organic frameworks as stable, highly active basic catalysts,” Journal of Catalysis, vol. 261, no. 1, pp. 75–87, 2009.
[135]	T. Ahnfeldt et al., “Synthesis and modification of a functionalized 3D open-framework structure with MIL-53 topology,” Inorganic chemistry, vol. 48, no. 7, pp. 3057–3064, 2009.
[136]	S. Natarajan and P. Mahata, “Non-carboxylate based metal-organic frameworks (MOFs) and related aspects,” Current Opinion in Solid State and Materials Science, vol. 13, no. 3, pp. 46–53, 2009.
[137]	C. N. R. Rao, J. N. Behera, and M. Dan, “Organically-templated metal sulfates, selenites and selenates,” Chemical Society Reviews, vol. 35, no. 4, pp. 375–387, 2006.
[138]	J. H. Cavka et al., “A new zirconium inorganic building brick forming metal organic frameworks with exceptional stability,” Journal of the American Chemical Society, vol. 130, no. 42, pp. 13850–13851, 2008.
[139]	N. A. Khan, I. J. Kang, H. Y. Seok, and S. H. Jhung, “Facile synthesis of nano-sized metal-organic frameworks, chromium-benzenedicarboxylate, MIL-101,” Chemical Engineering Journal, vol. 166, no. 3, pp. 1152–1157, 2011.
[140]	L. Hamon et al., “Comparative study of hydrogen sulfide adsorption in the Mil-53 (Al, Cr, Fe), MIl-47 (V), MIL-100 (Cr), and MIL-101 (Cr) metal- organic frameworks at room temperature,” Journal of the American Chemical Society, vol. 131, no. 25, pp. 8775–8777, 2009.
[141]	R. Sabouni, H. Kazemian, and S. Rohani, “Carbon Dioxide Adsorption in Microwave-Synthesized Metal Organic Framework CPM-5: Equilibrium and Kinetics study,” Microporous and Mesoporous Materials, 2013.
[142]	J. L. Rowsell, E. C. Spencer, J. Eckert, J. A. Howard, and O. M. Yaghi, “Gas adsorption sites in a large-pore metal-organic framework,” Science, vol. 309, no. 5739, pp. 1350–1354, 2005.
[143]	S. Amirjalayer and R. Schmid, “Adsorption of Hydrocarbons in Metal–Organic Frameworks: A Force Field Benchmark on the Example of Benzene in Metal–Organic Framework 5,” The Journal of Physical Chemistry C, vol. 116, no. 29, pp. 15369–15377, 2012.
[144]	J. Gordon, H. Kazemian, and S. Rohani, “Rapid and efficient crystallization of MIL-53 (Fe) by ultrasound and microwave irradiation,” Microporous and Mesoporous Materials, 2012.
[145]	J. R. Choi, T. Tachikawa, M. Fujitsuka, and T. Majima, “Europium-Based Metal- Organic Framework as a Photocatalyst for the One-Electron Oxidation of Organic Compounds,” Langmuir, vol. 26, no. 13, pp. 10437–10443, 2010.
[146]	S.-T. Zheng et al., “Pore Space Partition and Charge Separation in Cage-within-Cage Indium- Organic Frameworks with High CO2 Uptake,” Journal of the American Chemical Society, vol. 132, no. 48, pp. 17062–17064, 2010.
[147]	D. Farrusseng, S. Aguado, and C. Pinel, “Metal–organic frameworks: opportunities for catalysis,” Angewandte Chemie International Edition, vol. 48, no. 41, pp. 7502–7513, 2009.
[148]	S. Bourrelly, P. L. Llewellyn, C. Serre, F. Millange, T. Loiseau, and G. Férey, “Different adsorption behaviors of methane and carbon dioxide in the isotypic nanoporous metal terephthalates MIL-53 and MIL-47,” Journal of the American Chemical Society, vol. 127, no. 39, pp. 13519–13521, 2005.
[149]	G. Férey et al., “A chromium terephthalate-based solid with unusually large pore volumes and surface area,” Science, vol. 309, no. 5743, pp. 2040–2042, 2005.
[150]	L. Bromberg, Y. Diao, H. Wu, S. A. Speakman, and T. A. Hatton, “Chromium (III) Terephthalate Metal Organic Framework (MIL-101): HF-Free Synthesis, Structure, Polyoxometalate Composites, and Catalytic Properties,” Chemistry of Materials, vol. 24, no. 9, pp. 1664–1675, 2012.
[151]	C.-Y. Huang, M. Song, Z.-Y. Gu, H.-F. Wang, and X.-P. Yan, “Probing the Adsorption Characteristic of Metal–Organic Framework MIL-101 for Volatile Organic Compounds by Quartz Crystal Microbalance,” Environmental science & technology, vol. 45, no. 10, pp. 4490–4496, 2011.
[152]	A. U. Czaja, N. Trukhan, and U. Müller, “Industrial applications of metal–organic frameworks,” Chemical Society Reviews, vol. 38, no. 5, pp. 1284–1293, 2009.
[153]	D. Peralta, G. Chaplais, A. Simon-Masseron, K. Barthelet, and G. D. Pirngruber, “Synthesis and adsorption properties of ZIF-76 isomorphs,” Microporous and Mesoporous Materials, vol. 153, pp. 1–7, 2012.
[154]	A. Corma, H. Garcia, and F. X. Llabrés i Xamena, “Engineering metal organic frameworks for heterogeneous catalysis,” Chemical reviews, vol. 110, no. 8, pp. 4606–4655, 2010.
[155]	L. Alaerts, E. Séguin, H. Poelman, F. Thibault-Starzyk, P. A. Jacobs, and D. E. De Vos, “Probing the Lewis Acidity and Catalytic Activity of the Metal–Organic Framework [Cu3 (btc) 2](BTC= Benzene-1, 3, 5-tricarboxylate),” Chemistry-A European Journal, vol. 12, no. 28, pp. 7353–7363, 2006.
[156]	P. Mahata, G. Madras, and S. Natarajan, “Novel photocatalysts for the decomposition of organic dyes based on metal-organic framework compounds,” The Journal of Physical Chemistry B, vol. 110, no. 28, pp. 13759–13768, 2006.
[157]	H.-L. Jiang, B. Liu, T. Akita, M. Haruta, H. Sakurai, and Q. Xu, “Au@ ZIF-8: CO oxidation over gold nanoparticles deposited to metal- organic framework,” Journal of the American Chemical Society, vol. 131, no. 32, pp. 11302–11303, 2009.
[158]	Y.-S. Li, H. Bux, A. Feldhoff, G.-L. Li, W.-S. Yang, and J. Caro, “Controllable synthesis of metal–organic frameworks: From MOF nanorods to oriented MOF membranes,” Advanced Materials, vol. 22, no. 30, pp. 3322–3326, 2010.
[159]	S. Aguado, J. Canivet, and D. Farrusseng, “Facile shaping of an imidazolate-based MOF on ceramic beads for adsorption and catalytic applications,” Chemical Communications, vol. 46, no. 42, pp. 7999–8001, 2010.
[160]	M. Bahri and F. Haghighat, “Plasma-Based Indoor Air Cleaning Technologies: The State of the Art-Review,” CLEAN–Soil, Air, Water, vol. 42, no. 12, pp. 1667–1680, 2014.
[161]	S. Sultana, A. M. Vandenbroucke, C. Leys, N. De Geyter, and R. Morent, “Abatement of VOCs with Alternate Adsorption and Plasma-Assisted Regeneration: A Review,” Catalysts, vol. 5, no. 2, pp. 718–746, 2015.
[162]	M. Bahri and F. Haghighat, “Plasma Based Methods, New Air Cleaner Technologies for VOCs Removal in Non-Industrial Buildings.”
[163]	A. Chirokov, A. Gutsol, and A. Fridman, “Atmospheric pressure plasma of dielectric barrier discharges,” Pure and applied chemistry, vol. 77, no. 2, pp. 487–495, 2005.
[164]	T. N. Das and G. R. Dey, “Cold Plasma: simple tool for convenient utilitarian chemistry in homogeneous and heterogeneous environments,” Bhabha Atomic Research Centre, 2015.
[165]	E. Giovanis, “Evaluation of the’Clean Air Works’ program on actual ozone concentrations: a case study in North Carolina,” International Journal of Environmental Technology and Management, vol. 18, no. 5–6, pp. 465–477, 2015.
[166]	Z. Qian et al., “Ambient air pollution and preterm birth: a prospective birth cohort study in Wuhan, China,” International Journal of Hygiene and Environmental Health, 2015.
[167]	A. W. Reitze Jr, “The National Ambient Air Quality Standards for Ozone,” Ariz. J. Envtl. L. & Pol’y, vol. 6, pp. 421–421, 2015.
[168]	“Residential Indoor Air Quality Guidelines,” 22-Dec-2015. [Online]. Available: http://healthycanadians.gc.ca/healthy-living-vie-saine/environment-environnement/air/guidelines-lignes-directrices-eng.php.
[169]	M. A. Lieberman and A. J. Lichtenberg, “Principles of plasma discharges and materials processing,” MRS Bulletin, vol. 30, pp. 899–901, 1994.
[170]	H.-H. Kim, S.-M. Oh, A. Ogata, and S. Futamura, “Decomposition of benzene using Ag/TiO2 packed plasma-driven catalyst reactor: influence of electrode configuration and Ag-loading amount,” Catalysis letters, vol. 96, no. 3–4, pp. 189–194, 2004.
[171]	K. G. Kostov, R. Y. Honda, L. M. S. Alves, and M. E. Kayama, “Characteristics of dielectric barrier discharge reactor for material treatment,” Brazilian Journal of Physics, vol. 39, no. 2, pp. 322–325, 2009.
[172]	B. Li, M. Chrzanowski, Y. Zhang, and S. Ma, “Applications of Metal-Organic Frameworks Featuring multi-Functional Sites,” Coordination Chemistry Reviews, 2015.
[173]	Z. Dou et al., “Luminescent Metal-Organic Framework Films as Highly Sensitive and Fast-Response Oxygen Sensors,” Journal of the American Chemical Society, 2014.
[174]	D. J. Wales et al., “Gas sensing using porous materials for automotive applications,” Chemical Society Reviews, 2015.
[175]	K. Fujii et al., “Direct structure elucidation by powder X-ray diffraction of a metal–organic framework material prepared by solvent-free grinding,” Chemical Communications, vol. 46, no. 40, pp. 7572–7574, 2010.
[176]	K. Müller-Buschbaum and Y. Mokaddem, “MOFs by solvent free high temperature synthesis exemplified by 3 ∞ [Eu3(Tz*)6(Tz*H)2],” Solid State Sciences, vol. 10, no. 4, pp. 416–420, 2008.
[177]	E. Pérez-Mayoral, R. M. Martín-Aranda, A. J. López-Peinado, P. Ballesteros, A. Zukal, and J. Čejka, “Green synthesis of acetals/ketals: Efficient solvent-free process for the carbonyl/hydroxyl group protection catalyzed by SBA-15 materials,” Topics in Catalysis, vol. 52, no. 1–2, pp. 148–152, 2009.
[178]	A. Pichon, A. Lazuen-Garay, and S. L. James, “Solvent-free synthesis of a microporous metal–organic framework,” CrystEngComm, vol. 8, no. 3, pp. 211–214, 2006.
[179]	A. L. Garay, A. Pichon, and S. L. James, “Solvent-free synthesis of metal complexes,” Chemical Society Reviews, vol. 36, no. 6, pp. 846–855, 2007.
[180]	T. Friščić et al., “Real-time and in situ monitoring of mechanochemical milling reactions,” Nature chemistry, vol. 5, no. 1, pp. 66–73, 2013.
[181]	K. D. Harris, “Mechanochemical synthesis: How grinding evolves,” Nature chemistry, vol. 5, no. 1, pp. 12–14, 2013.
[182]	N. K. Singh, M. Hardi, and V. P. Balema, “Mechanochemical synthesis of an yttrium based metal–organic framework,” Chemical Communications, vol. 49, no. 10, pp. 972–974, 2013.
[183]	Y. Sun and H.-C. Zhou, “Recent progress in the synthesis of metal–organic frameworks,” Science and Technology of Advanced Materials, vol. 16, no. 5, p. 054202, 2015.
[184]	S. L. James et al., “Mechanochemistry: opportunities for new and cleaner synthesis,” Chemical Society Reviews, vol. 41, no. 1, pp. 413–447, 2012.
[185]	T.-X. Métro, J. Bonnamour, T. Reidon, J. Sarpoulet, J. Martinez, and F. Lamaty, “Mechanosynthesis of amides in the total absence of organic solvent from reaction to product recovery,” Chemical Communications, vol. 48, no. 96, pp. 11781–11783, 2012.
[186]	S. Tanaka, K. Kida, T. Nagaoka, T. Ota, and Y. Miyake, “Mechanochemical dry conversion of zinc oxide to zeolitic imidazolate framework,” Chemical Communications, vol. 49, no. 72, pp. 7884–7886, 2013.
[187]	F. Haghighat and L. De Bellis, “Material emission rates: literature review, and the impact of indoor air temperature and relative humidity,” Building and Environment, vol. 33, no. 5, pp. 261–277, 1998.
[188]	A.-L. Tiffonnet, P. Blondeau, F. Allard, and F. Haghighat, “Sorption isotherms of acetone on various building materials,” Indoor and Built Environment, vol. 11, no. 2, pp. 95–104, 2002.
[189]	G. Wieslander, D. Norbäck, E. Björnsson, C. Janson, and G. Boman, “Asthma and the indoor environment: the significance of emission of formaldehyde and volatile organic compounds from newly painted indoor surfaces,” International archives of occupational and environmental health, vol. 69, no. 2, pp. 115–124, 1996.
[190]	Y. Bai, Z.-H. Huang, and F. Kang, “Synthesis of reduced graphene oxide/phenolic resin-based carbon composite ultrafine fibers and their adsorption performance for volatile organic compounds and water,” Journal of Materials Chemistry A, vol. 1, no. 33, pp. 9536–9543, 2013.
[191]	Y. Bai, Z.-H. Huang, and F. Kang, “Electrospun preparation of microporous carbon ultrafine fibers with tuned diameter, pore structure and hydrophobicity from phenolic resin,” Carbon, vol. 66, pp. 705–712, 2014.
[192]	M. Bahri, F. Haghighat, S. Rohani, and H. Kazemian, “Impact of design parameters on the performance of non-thermal plasma air purification system,” Chemical Engineering Journal, vol. 302, pp. 204–212, 2016.
[193]	A. Stankiewicz, “Reactive separations for process intensification: an industrial perspective,” Chemical Engineering and Processing: Process Intensification, vol. 42, no. 3, pp. 137–144, 2003.
[194]	J. Richards, Control of gaseous emissions: Student manual, APTI Course 415. North Carolina State University, 1995.
[195]	M. Delkash, B. E. Bakhshayesh, and H. Kazemian, “Using zeolitic adsorbents to cleanup special wastewater streams: A review,” Microporous and Mesoporous Materials, vol. 214, pp. 224–241, 2015.
[196]	Z. G. L. V. Sari, H. Younesi, and H. Kazemian, “Synthesis of nanosized ZSM-5 zeolite using extracted silica from rice husk without adding any alumina source,” Applied Nanoscience, vol. 5, no. 6, pp. 737–745, 2015.
[197]	S. I. Garcés-Polo, J. Villarroel-Rocha, K. Sapag, S. A. Korili, and A. Gil, “A comparative study of CO 2 diffusion from adsorption kinetic measurements on microporous materials at low pressures and temperatures,” Chemical Engineering Journal, vol. 302, pp. 278–286, 2016.
[198]	C.-C. Wang, X.-D. Du, J. Li, X.-X. Guo, P. Wang, and J. Zhang, “Photocatalytic Cr (VI) reduction in metal-organic frameworks: A mini-review,” Applied Catalysis B: Environmental, vol. 193, pp. 198–216, 2016.
[199]	L. Qin, Z. Li, Z. Xu, X. Guo, and G. Zhang, “Organic-acid-directed assembly of iron–carbon oxides nanoparticles on coordinatively unsaturated metal sites of MIL-101 for green photochemical oxidation,” Applied Catalysis B: Environmental, vol. 179, pp. 500–508, 2015.
[200]	N. Klein, A. Henschel, and S. Kaskel, “n-Butane adsorption on Cu 3 (btc) 2 and MIL-101,” Microporous and Mesoporous Materials, vol. 129, no. 1, pp. 238–242, 2010.
[201]	J. Shi, Z. Zhao, Q. Xia, Y. Li, and Z. Li, “Adsorption and diffusion of ethyl acetate on the chromium-based metal–organic framework MIL-101,” Journal of Chemical & Engineering Data, vol. 56, no. 8, pp. 3419–3425, 2011.
[202]	S. Xian et al., “Competitive adsorption of water vapor with VOCs dichloroethane, ethyl acetate and benzene on MIL-101 (Cr) in humid atmosphere,” RSC Advances, vol. 5, no. 3, pp. 1827–1834, 2015.
[203]	P. Küsgens et al., “Characterization of metal-organic frameworks by water adsorption,” Microporous and Mesoporous Materials, vol. 120, no. 3, pp. 325–330, 2009.
[204]	Z. Zhao, S. Wang, Y. Yang, X. Li, J. Li, and Z. Li, “Competitive adsorption and selectivity of benzene and water vapor on the microporous metal organic frameworks (HKUST-1),” Chemical Engineering Journal, vol. 259, pp. 79–89, 2015.
[205]	N. Al-Janabi et al., “Mapping the Cu-BTC metal–organic framework (HKUST-1) stability envelope in the presence of water vapour for CO 2 adsorption from flue gases,” Chemical Engineering Journal, vol. 281, pp. 669–677, 2015.
[206]	P. Horcajada et al., “Flexible porous metal-organic frameworks for a controlled drug delivery,” Journal of the American Chemical Society, vol. 130, no. 21, pp. 6774–6780, 2008.
[207]	C. Serre, C. Mellot-Draznieks, S. Surblé, N. Audebrand, Y. Filinchuk, and G. Férey, “Role of solvent-host interactions that lead to very large swelling of hybrid frameworks,” Science, vol. 315, no. 5820, pp. 1828–1831, 2007.
[208]	K. Yang, Q. Sun, F. Xue, and D. Lin, “Adsorption of volatile organic compounds by metal–organic frameworks MIL-101: Influence of molecular size and shape,” Journal of hazardous materials, vol. 195, pp. 124–131, 2011.
[209]	J. Tang, M. Yang, M. Yang, J. Wang, W. Dong, and G. Wang, “Heterogeneous Fe-MIL-101 catalysts for efficient one-pot four-component coupling synthesis of highly substituted pyrroles,” New Journal of Chemistry, vol. 39, no. 6, pp. 4919–4923, 2015.
[210]	L. H. Wee, F. Bonino, C. Lamberti, S. Bordiga, and J. A. Martens, “Cr-MIL-101 encapsulated Keggin phosphotungstic acid as active nanomaterial for catalysing the alcoholysis of styrene oxide,” Green Chemistry, vol. 16, no. 3, pp. 1351–1357, 2014.
[211]	S. Brunauer, L. S. Deming, W. E. Deming, and E. Teller, “On a theory of the van der Waals adsorption of gases,” Journal of the American Chemical society, vol. 62, no. 7, pp. 1723–1732, 1940.
[212]	A. J. Fletcher, K. M. Thomas, and M. J. Rosseinsky, “Flexibility in metal-organic framework materials: Impact on sorption properties,” Journal of Solid State Chemistry, vol. 178, no. 8, pp. 2491–2510, 2005.
[213]	W. Xuan, C. Zhu, Y. Liu, and Y. Cui, “Mesoporous metal–organic framework materials,” Chemical Society Reviews, vol. 41, no. 5, pp. 1677–1695, 2012.
[214]	D. Romero et al., “Removal of toluene over NaX zeolite exchanged with Cu2+,” Catalysts, vol. 5, no. 3, pp. 1479–1497, 2015.
[215]	F. Millange, C. Serre, and G. Férey, “Synthesis, structure determination and properties of MIL-53as and MIL-53ht: the first Cr iii hybrid inorganic–organic microporous solids: Cr iii (OH)·${$O 2 C–C 6 H 4–CO 2$}$·${$HO 2 C–C 6 H 4–CO 2 H$}$ x,” Chemical Communications, no. 8, pp. 822–823, 2002.
[216]	P. L. Llewellyn et al., “Complex adsorption of short linear alkanes in the flexible metal-organic-framework MIL-53 (Fe),” Journal of the American Chemical Society, vol. 131, no. 36, pp. 13002–13008, 2009.
[217]	L. Song et al., “Mesoporous metal–organic frameworks: design and applications,” Energy & Environmental Science, vol. 5, no. 6, pp. 7508–7520, 2012.
[218]	T. K. Trung et al., “Adsorption of C5–C9 hydrocarbons in microporous MOFs MIL-100 (Cr) and MIL-101 (Cr): A manometric study,” Microporous and Mesoporous Materials, vol. 134, no. 1, pp. 134–140, 2010.
[219]	S. H. Jhung, J.-H. Lee, J. W. Yoon, C. Serre, G. Férey, and J.-S. Chang, “Microwave Synthesis of Chromium Terephthalate MIL-101 and Its Benzene Sorption Ability,” Advanced Materials, vol. 19, no. 1, pp. 121–124, 2007.
[220]	J. Van Durme, J. Dewulf, C. Leys, and H. Van Langenhove, “Combining non-thermal plasma with heterogeneous catalysis in waste gas treatment: A review,” Applied Catalysis B: Environmental, vol. 78, no. 3–4, pp. 324–333, 2008.
[221]	A. M. Vandenbroucke et al., “TCE abatement with a plasma-catalytic combined system using MnO 2 as catalyst,” Applied Catalysis B: Environmental, vol. 156, pp. 94–100, 2014.
[222]	H.-H. Kim, A. Ogata, and S. Futamura, “Atmospheric plasma-driven catalysis for the low temperature decomposition of dilute aromatic compounds,” Journal of Physics D: Applied Physics, vol. 38, no. 8, p. 1292, 2005.
[223]	R. Huang et al., “Enhancement of the non-thermal plasma-catalytic system with different zeolites for toluene removal,” RSC Advances, vol. 5, no. 88, pp. 72113–72120, 2015.
[224]	S. W. Baek, J. R. Kim, and S. K. Ihm, “Design of dual functional adsorbent/catalyst system for the control of VOC’s by using metal-loaded hydrophobic Y-zeolites,” Catalysis Today, vol. 93, pp. 575–581, 2004.
[225]	B. Dou, Q. Hu, J. Li, S. Qiao, and Z. Hao, “Adsorption performance of VOCs in ordered mesoporous silicas with different pore structures and surface chemistry,” Journal of hazardous materials, vol. 186, no. 2, pp. 1615–1624, 2011.
[226]	J. Fang, X. Chen, Q. Xia, H. Xi, and Z. Li, “Effect of Relative Humidity on Catalytic Combustion of Toluene over Copper Based Catalysts with Different Supports,” Chinese Journal of Chemical Engineering, vol. 17, no. 5, pp. 767–772, 2009.
[227]	Q. H. Trinh and Y. S. Mok, “Effect of the adsorbent/catalyst preparation method and plasma reactor configuration on the removal of dilute ethylene from air stream,” Catalysis Today, 2015.
[228]	M. Bahri, H. Kazemian, S. Rohani, and F. Haghighat, “Mechanochemical synthesis of CPM-5: A Green Method,” Chemical Engineering & Technology, 2016.
[229]	Y. Hu, H. Kazemian, S. Rohani, Y. Huang, and Y. Song, “In situ high pressure study of ZIF-8 by FTIR spectroscopy,” Chemical Communications, vol. 47, no. 47, pp. 12694–12696, 2011.
[230]	H.-L. Jiang et al., “From Metal–Organic Framework to Nanoporous Carbon: Toward a Very High Surface Area and Hydrogen Uptake,” Journal of the American Chemical Society, vol. 133, no. 31, pp. 11854–11857, 2011.
[231]	M. Bahri, F. Haghighat, H. Kazemian, and S. Rohani, “A Comparative Study on Metal Organic Frameworks for Indoor Environment Application: Adsorption Evaluation.” Chemical Engineering Journal, Jul-2016.
[232]	W. Wang, H. Wang, T. Zhu, and X. Fan, “Removal of gas phase low-concentration toluene over Mn, Ag and Ce modified HZSM-5 catalysts by periodical operation of adsorption and non-thermal plasma regeneration,” Journal of hazardous materials, vol. 292, pp. 70–78, 2015.
[233]	T. A. Vu et al., “Arsenic removal from aqueous solutions by adsorption using novel MIL-53 (Fe) as a highly efficient adsorbent,” RSC Advances, vol. 5, no. 7, pp. 5261–5268, 2015.
[234]	J. Karuppiah, R. Karvembu, and C. Subrahmanyam, “The catalytic effect of MnO x and CoO x on the decomposition of nitrobenzene in a non-thermal plasma reactor,” Chemical Engineering Journal, vol. 180, pp. 39–45, 2012.
[235]	B. R. Raju, E. L. Reddy, J. Karuppiah, P. M. K. Reddy, and C. Subrahmanyam, “Catalytic non-thermal plasma reactor for the decomposition of a mixture of volatile organic compounds,” Journal of Chemical Sciences, vol. 125, no. 3, pp. 673–678, 2013.
[236]	L. Ai, L. Li, C. Zhang, J. Fu, and J. Jiang, “MIL-53 (Fe): A Metal–Organic Framework with Intrinsic Peroxidase-Like Catalytic Activity for Colorimetric Biosensing,” Chemistry–A European Journal, vol. 19, no. 45, pp. 15105–15108, 2013.
[237]	R. Liang, F. Jing, L. Shen, N. Qin, and L. Wu, “MIL-53 (Fe) as a highly efficient bifunctional photocatalyst for the simultaneous reduction of Cr (VI) and oxidation of dyes,” Journal of hazardous materials, vol. 287, pp. 364–372, 2015.
[238]	X. Zhou et al., “A novel MOF/graphene oxide composite GrO@ MIL-101 with high adsorption capacity for acetone,” Journal of Materials Chemistry A, vol. 2, no. 13, pp. 4722–4730, 2014.
[239]	L. Ai, C. Zhang, L. Li, and J. Jiang, “Iron terephthalate metal–organic framework: Revealing the effective activation of hydrogen peroxide for the degradation of organic dye under visible light irradiation,” Applied Catalysis B: Environmental, vol. 148, pp. 191–200, 2014.
[240]	C. Zhang, L. Ai, and J. Jiang, “Solvothermal synthesis of MIL–53 (Fe) hybrid magnetic composites for photoelectrochemical water oxidation and organic pollutant photodegradation under visible light,” Journal of Materials Chemistry A, vol. 3, no. 6, pp. 3074–3081, 2015.
[241]	X. Sun, Q. Xia, Z. Zhao, Y. Li, and Z. Li, “Synthesis and adsorption performance of MIL-101 (Cr)/graphite oxide composites with high capacities of n-hexane,” Chemical engineering journal, vol. 239, pp. 226–232, 2014.
[242]	N. V. Maksimchuk et al., “Heterogeneous selective oxidation catalysts based on coordination polymer MIL-101 and transition metal-substituted polyoxometalates,” Journal of Catalysis, vol. 257, no. 2, pp. 315–323, 2008.