[1] ISO 2631-1: Mechanical vibration and shock – evaluation of human exposure to whole-body vibration – part 1: General requirements, (1997).
[2] Directive 2002/44/EC of the European Parliament, Minimum health and safety requirements regarding the exposure of workers to the risks arising from physical agents (vibration), (2002).
[3] T. Eger, J.M. Stevenson, S. Grenier, P. Boileau, M.P. Smets, Influence of vehicle size, haulage capacity and ride control on vibration exposure and predicted health risks for LHD vehicle operators, Journal of Low Frequency Noise, Vibration & Active Control 30 (2011) 45-62. 
[4] V. Dentoni, G. Massacci, Occupational exposure to whole-body vibration: Unfavorable effects due to the use of old earth-moving machinery in mine reclamation, International Journal of Mining, Reclamation and Environment 27 (2013) 127-142. 
[5] A.P. Cann, A.W. Salmoni, P. Vi, T.R. Eger, An exploratory study of whole-body vibration exposure and dose while operating heavy equipment in the construction industry, Applied Occupational and Environmental Hygiene 18 (2003) 999-1005. 
[6] G. Owen, A. Hunter, A survey of tractor overturning accidents in the united kingdom, Journal of Occupational Accidents 5 (1983) 185-193. 
[7] G. M. Owen and G. Gilfillan, "Survey of overturning accidents in England and wales, 1968-78," Scottish Institute of Agricultural Engineering, Tech. Rep. SIN/265, 1979.
[8] C.G. Drury, W.L. Porter, P.G. Dempsey, Patterns in mining haul truck accidents, Proceedings of the Human Factors and Ergonomics Society Annual Meeting, (2012) 2011-2015.
[9] B.R. Santos, W.L. Porter, A.G. Mayton, An analysis of injuries to haul truck operators in the US mining industry, Proceedings of the Human Factors and Ergonomics Society Annual Meeting, (2010) 1870-1874.
[10] A. Pazooki, S. Rakheja, D. Cao, Kineto-dynamic directional response analysis of an articulated frame steer vehicle, International Journal of Vehicle Design 65 (2014) 1-30. 
[11] P. Dudziński, A. Skurjat, Directional dynamics problems of an articulated frame steer wheeled vehicles, Journal of KONES 19 (2012) 89-98. 
[12] D.N.L. Horton, D.A. Crolla, Theoretical analysis of the steering behaviour of articulated frame steer vehicles, Vehicle System Dynamics 15 (1986) 211-234. 
[13] K. Nevala, M. Jarviluoma, An active vibration damping system of a driver's seat for off-road vehicles, 4th Annual Conference on Mechatronics and Machine Vision in Practice, (1997) 38-43.
[14] X. Huang, S. Rakheja, Performance analysis of a relative motion based magneto-rheological damper controller for suspension seats, 4th International Conference on Micro- and Nanosystems, Montreal, Quebec, Canada, (2010) 39-48.
[15] R.J. Jack, M. Oliver, J.P. Dickey, S. Cation, G. Hayward, N. Lee-Shee, Six-degree-of-freedom whole-body vibration exposure levels during routine skidder operations, Ergonomics 53 (2010) 696-715. 
[16] T. Eger, A. Salmoni, A. Cann, R. Jack, Whole-body vibration exposure experienced by mining equipment operators, Occupational Ergonomics 6 (2006) 121-127. 
[17] S. Cation, R. Jack, M. Oliver, J.P. Dickey, N. Lee-Shee, Six degree of freedom whole-body vibration during forestry skidder operations, International Journal of Industrial Ergonomics 38 (2008) 739-757. 
[18] N.L. Azad, A. Khajepour, J. McPhee, A survey of stability enhancement strategies for articulated steer vehicles, International Journal of Heavy Vehicle Systems 16 (2009) 26-48. 
[19] Y. He, A. Khajepour, J. McPhee, X. Wang, Dynamic modelling and stability analysis of articulated frame steer vehicles, International Journal of Heavy Vehicle Systems 12 (2005) 28-59. 
[20] A. Pazooki, S. Rakheja, D. Cao, Effect of terrain roughness on the roll and yaw directional stability of an articulated frame steer vehicle, SAE International Journal of Commercial Vehicles 6 (2013) 325-339. 
[21] Y. Li, W. Sun, J. Huang, L. Zheng, Y. Wang, Effect of vertical and lateral coupling between tyre and road on vehicle rollover, Vehicle System Dynamics 51 (2013) 1216-1241. 
[22] A. Pazooki, S. Rakheja, D. Cao, Modeling and validation of off-road vehicle ride dynamics, Mechanical Systems and Signal Processing 28 (2012) 679-695. 
[23] D. Cao, S. Rakheja, C. Su, Roll-and pitch-plane coupled hydro-pneumatic suspension: Part 1: Feasibility analysis and suspension properties, Vehicle System Dynamics 48 (2010) 361-386. 
[24] M. Bovenzi, A longitudinal study of low back pain and daily vibration exposure in professional drivers, Industrial Health 48 (2010) 584-595. 
[25] N.L. Azad, J. McPhee, A. Khajepour, The effects of front and rear tires characteristics on the snaking behavior of articulated steer vehicles, Proceedings of IEEE Vehicle Power and Propulsion Conference, (2005) 274-279.
[26] European Committee for Standardization, "Mechanical vibration – guide to the health effects of vibration on the human body," Brussels, Tech. Rep. CEN Report 12349, 1996.
[27] M. Bovenzi, Low-back pain disorders and exposure to whole-body vibration in the workplace, Seminars in Perinatology 20 (1996) 38-53. 
[28] S. Lings, C. Leboeuf-Yde, Whole-body vibration and low back pain: A systematic critical review of the epidemiological literature 1992-1999, International Archives of Occupational and Environmental Health 73 (2000) 290-297. 
[29] M. Ekman, O. Johnell, L. Lidgren, The economic cost of low back pain in Sweden in 2001, Acta Orthopaedica 76 (2005) 275-284. 
[30] H.R. Guo, S. Tanaka, W.E. Halperin, L.L. Cameron, Back pain prevalence in US industry and estimates of lost workdays, Journal of Public Health 87 (1999) 1029-1035. 
[31] British Standards Institution, BS 6841 - Measurement and Evaluation of Human Exposure to Whole-Body Mechanical Vibration and Repeated Shock, 1987.
[32] S. Maeda, M. Morioka, Measurement of whole-body vibration exposure from garbage trucks, Journal of Sound and Vibration 215 (1998) 959-964. 
[33] R.P. Blood, P.W. Rynell, P.W. Johnson, Vehicle design influences whole body vibration exposures: Effect of the location of the front axle relative to the cab, Journal of Occupational and Environmental Hygiene 8 (2011) 364-374. 
[34] S. Milosavljevic, D.I. Mcbride, N. Bagheri, R.M. Vasiljev, R. Mani, A.B. Carman, B. Rehn, Exposure to whole-body vibration and mechanical shock: A field study of quad bike use in agriculture, Annals of Occupational Hygiene 55 (2011) 286-295. 
[35] P. Xu, B. Bernardo, K. Tan, Optimal mounting design for cab vibration isolation, International Journal of Vehicle Design 57 (2011) 292-304. 
[36] M. Park, T. Fukuda, T. Kim, S. Maeda, Health risk evaluation of whole-body vibration by ISO 2631-5 and ISO 2631-1 for operators of agricultural tractors and recreational vehicles. Industrial Health 51 (2013) 364-370. 
[37] B. Rehn, T. Nilsson, B. Olofsson, R. Lundstrom, Whole-body vibration exposure and non-neutral neck postures during occupational use of all-terrain vehicles, Annals of Occupational Hygiene 49 (2005) 267-275. 
[38] O.O. Okunribido, M. Magnusson, M.H. Pope, Low back pain in drivers: The relative role of whole-body vibration, posture and manual materials handling, Journal of Sound and Vibration 298 (2006) 540-555. 
[39] I.J.H. Tiemessen, C.T.J. Hulshof, M.H.W. Frings-Dresen, Two way assessment of other physical work demands while measuring the whole body vibration magnitude, Journal of Sound and Vibration 310 (2008) 1080-1092. 
[40] M. El-Gindy, An overview of performance measures for heavy commercial vehicles in north america, International Journal of Vehicle Design 16 (1995) 441-463. 
[41] P. Liu, "Analysis, Detection and Early Warning Control of Dynamic Rollover of Heavy Freight Vehicles," Doctoral dissertation, Concordia University, 1999. 
[42] A.G.M. Hunter, A review of research into machine stability on slopes, Safety Science 16 (1993) 325-339. 
[43] M.G. Yisa, H. Terao, N. Noguchi, M. Kubota, Stability criteria for tractor-implement operation on slopes, Journal of Terramechanics 35 (1998) 1-19. 
[44] J.E. Kelly, G.E. Rehkugler, Stablity criteria for operation on side slopes, ASAE Special Publication, Engineering a Safer Food Machine (1980) 145-157. 
[45] N.L. Azad, A. Khajepour, J. McPhee, Effects of locking differentials on the snaking behaviour of articulated steer vehicles, International Journal of Vehicle Systems Modelling and Testing 2 (2007) 101-127. 
[46] A. Rehnberg, L. Drugge, Influence of tyre properties on the ride dynamics of heavy off-road vehicles, Joint 9th Asia-Pacific ISTVS Conference and Annual Meeting of Japanese Society for Terramechanics, Sapporo, Japan, (2010) .
[47] D.A. Crolla, E.B. Maclaurin, Theoretical and practical aspects of the ride dynamics of off-road vehicles-part 1, Journal of Terramechanics 22 (1985) 17-25. 
[48] A. Pazooki, S. Rakheja, D. Cao, A three–dimensional model of an articulated frame–steer vehicle for coupled ride and handling dynamic analyses, International Journal of Vehicle Performance 1 (2014) 264-297. 
[49] A. Rehnberg, "Suspension design for off-road construction machine," Doctoral dissertation, KTH Royal Institute of Technology, 2011. 
[50] N. L. Azad, "Dynamic modelling and stability controller development for articulated steer vehicles," Doctoral Thesis, University of Waterloo, 2006. 
[51] H. B. Pacejka, Tyre and Vehicle Dynamics, Oxford: Butterworth-Heinemann, 2006.
[52] M. Gipser, R. Hofer, P. Lugner, Dynamical tyre forces response to road unevennesses, Vehicle System Dynamics 27 (1997) 94-108. 
[53] X. Li, G. Wang, Z. Yao, Y. Yang, Research on lateral stability and rollover mechanism of articulated wheel loader, Mathematical and Computer Modelling of Dynamical Systems (2013) 1-16. 
[54] X. Li, G. Wang, Z. Yao, J. Qu, Dynamic model and validation of an articulated steering wheel loader on slopes and over obstacles, Vehicle System Dynamics (2013) 1-19. 
[55] D. Gee-Clough, Selection of tyre sizes for agricultural vehicles, Journal of Agricultural Engineering Research 25 (1980) 261-278. 
[56] D.A. Crolla, Off-road vehicle dynamics, Vehicle System Dynamics 10 (1981) 253-266. 
[57] H.B. Pacejka, E. Bakker, L. Nyborg, Tyre modelling for use in vehicle dynamics studies, SAE Paper no. 870421 (1987) .
[58] K. Guo, D. Lu, S. Chen, W.C. Lin, X. Lu, The UniTire model: A nonlinear and non-steady-state tyre model for vehicle dynamics simulation, Vehicle System Dynamics 43 (2005) 341-358. 
[59] D.A. Crolla, D.N.L. Horton, R.M. Stayner, Effect of tyre modelling on tractor ride vibration predictions, Journal of Agricultural Engineering Research 47 (1990) 55-77. 
[60] Q. Xiding, L. Jude, M. Yongxin, A modified point contact tire model for the simulation of vehicle ride quality, Journal of Terramechanics 30 (1993) 133-141. 
[61] J.A. Lines, R.O. Peachey, Predicting the ride vibration of a simple unsuspended vehicle, Journal of Terramechanics 29 (1992) 207-221. 
[62] D.N.L. Horton, D.A. Crolla, Handling behaviour of off-road vehicles, International Journal of Vehicle Design 5 (1984) 197-218. 
[63] D.A. Crolla, A.S.A. El-Razaz, A review of the combined lateral and longitudinal force generation of tyres on deformable surfaces, Journal of Terramechanics 24 (1987) 199-225. 
[64] M. McAllister, D. Gee-Clough, D. Evernden, An investigation into forces on undriven, angled wheels, National Institute of Agricultural Engineering, Departmental Note DN 1045 (1981) .
[65] G. Krick, Behaviour of tyres driven in soft ground with side slip, Journal of Terramechanics 9 (1973) 9-30. 
[66] Z.J. Janosi, G. Wray, I.O. Kamm, Tire turning forces under on-and off-road conditions, 7th International Conference of International Society for Terrain-Vehicle Systems, (1981) .
[67] J. R. Ellis, Vehicle Dynamics, Business Books London, 1969.
[68] C. Oertel, On modeling contact and friction calculation of tyre response on uneven roads, Vehicle System Dynamics 27 (1997) 289-302. 
[69] Y. Choi, G. Gim, Improved UA tire model as a semi-empirical model, FISITA World Automotive Congress, Seoul, Republic of Korea, (2000) F2000G383.
[70] Adams Help, "Using FTire tire model," 2010.
[71] W. Smith, H. Peng, Modeling of wheel–soil interaction over rough terrain using the discrete element method, Journal of Terramechanics 50 (2013) 277-287. 
[72] K. Xia, Finite element modeling of tire/terrain interaction: Application to predicting soil compaction and tire mobility, Journal of Terramechanics 48 (2011) 113-123. 
[73] M. G. Bekker, Theory of Land Locomotion: The Mechanics of Vehicle Mobility, Ann Arbor: University of Michigan Press, 1956.
[74] S. Ohkubo, A. Oida, M. Yamazaki, Application of DEM to find the interaction between tire and soil. Nogyo Kikai Gakkai Nenji Taikai Koen Yoshi 58 (1999) 483-484. 
[75] R. Ma, H. Chemistruck, J.B. Ferris, State-of-the-art of terrain profile characterization models, International Journal of Vehicle Design 61 (2013) 285-304. 
[76] R. Lee, C. Sandu, Terrain profile modelling using stochastic partial differential equations, International Journal of Vehicle Systems Modelling and Testing 4 (2009) 318-356. 
[77] H.M. Chemistruck, J.B. Ferris, D. Gorsich, Using a galerkin approach to define terrain surfaces, Journal of Dynamic Systems, Measurement, and Control 134 (2012) 021017. 
[78] ISO, 8608 Mechanical Vibration – Road Surface Profiles – Reporting of Measured Data, Geneva: 1995.
[79] J. Y. Wong, Theory of Ground Vehicles, New York: John Wiley & Sons, 2002.
[80] A. Pazooki, D. Cao, S. Rakheja, P. Boileau, Ride dynamic evaluations and design optimisation of a torsio-elastic off-road vehicle suspension, Vehicle System Dynamics 49 (2011) 1455-1476. 
[81] J.L. Logdanoff, F. Kozin, L.J. Cote, Atlas of off-road ground roughness PSDs and report on data acquisition techniques, ATAC Components Research and Development Laboratories Technical Report no.9387 (LL109) (1996) .
[82] D. Ammon, Problems in road surface modelling, Vehicle System Dynamics 20 (1992) 28-41. 
[83] K.M.A. Kamash, J.D. Robson, The application of isotropy in road surface modelling, Journal of Sound and Vibration 57 (1978) 89-100. 
[84] A.N. Heath, Modelling and simulation of road roughness, 11th IAVSD Symposium, Kingston, (1989) 275-284.
[85] L. Sun, J. Su, Modeling random fields of road surface irregularities, Road Materials and Pavement Design 2 (2001) 49-70. 
[86] H. Zhang, Computer prediction of automobile ride comfort dynamics, Automotive Engineering 8 (1986) 21-31. 
[87] K. Bogsjö, Coherence of road roughness in left and right wheel-path, Vehicle System Dynamics 46 (2008) 599-609. 
[88] Y. Zhang, J. Zhang, Numerical simulation of stochastic road process using white noise filtration, Mechanical Systems and Signal Processing 20 (2006) 363-372. 
[89] P. Boileau, "A study of secondary suspensions and human driver response to whole-body vehicular vibration and shock," Doctoral dissertation, Concordia University, 1995. 
[90] S. Rakheja, S. Sankar, Improved off-road tractor ride via passive cab and seat suspensions, Journal of Vibration Acoustics Stress and Reliability in Design 106 (1984) 305-313. 
[91] S. Sankar, M. Afonso, Design and testing of lateral seat suspension for off-road vehicles, Journal of Terramechanics 30 (1993) 371-393. 
[92] I. Hostens, K. Deprez, H. Ramon, An improved design of air suspension for seats of mobile agricultural machines, Journal of Sound and Vibration 276 (2004) 141-156. 
[93] P. Donati, Survey of technical preventative measures to reduce whole-body vibration effects when designing mobile machinery, Journal of Sound and Vibration 253 (2002) 169-183. 
[94] X.Q. Ma, S. Rakheja, C. Su, Damping requirement of a suspension seat subject to low frequency vehicle vibration and shock, International Journal of Vehicle Design 47 (2008) 133-156. 
[95] I.J. Tiemessen, C.T. Hulshof, M.H. Frings-Dresen, An overview of strategies to reduce whole-body vibration exposure on drivers: A systematic review, International Journal of Industrial Ergonomics 37 (2007) 245-256. 
[96] A. Achen, J. Toscano, R. Marjoram, K. St Clair, B. Mcmahon, A. Goelz, S. Shutto, Semi-active vehicle cab suspension using magnetorheological (MR) technology, Proceedings of the JFPS International Symposium on Fluid Power, (2008) 561-564.
[97] D. Hilton, P. Moran, Experiments in improving tractor operator ride by means of a cab suspension, Journal of Agricultural Engineering Research 20 (1975) 433-448. 
[98] Y. Kang, W. Zhang, S. Rakheja, Relative kinematic and handling performance analyses of independent axle suspensions for a heavy-duty mining truck, International Journal of Heavy Vehicle Systems 22 (2015) 114-136. 
[99] A. Rehnberg, Vehicle dynamic analysis of wheel loaders with suspended axles, Int. J. Vehicle Systems Modelling and Testing 3 (2008) 168-188. 
[100] P. Hansson, Working space requirement for an agricultural tractor axle suspension, Biosystems Engineering 81 (2002) 57-71. 
[101] P. Hansson, Rear axle suspensions with controlled damping on agricultural tractors, Computers and Electronics in Agriculture 15 (1996) 123-147. 
[102] P.S. Els, N.J. Theron, P.E. Uys, M.J. Thoresson, The ride comfort vs. handling compromise for off-road vehicles, Journal of Terramechanics 44 (2007) 303-317. 
[103] D.N.L. Horton, D.A. Crolla, Theoretical analysis of a semi active suspension fitted to an off-road vehicle, Vehicle System Dynamics 15 (1986) 351-372. 
[104] D. Cao, S. Rakheja, C. Su, Roll-and pitch-plane-coupled hydro-pneumatic suspension. part 2: Dynamic response analyses, Vehicle System Dynamics 48 (2010) 507-528. 
[105] R.W. Goldman, M. El-Gindy, B.T. Kulakowski, Rollover dynamics of road vehicles: Literature survey, International Journal of Heavy Vehicle Systems 8 (2001) 103-141. 
[106] R. Kamnik, F. Boettiger, K. Hunt, Roll dynamics and lateral load transfer estimation in articulated heavy freight vehicles, Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering 217 (2003) 985-997. 
[107] E. Dahlberg, A. Stensson, The dynamic rollover threshold-a heavy truck sensitivity study, International Journal of Vehicle Design 40 (2006) 228-250. 
[108] J. Preston-Thomas, J. Woodrooffe, A feasibility study of a rollover warning device for heavy trucks, Transport Canada Publication no. TP 10610E (1990) .
[109] A.G. Nalecz, Z. Lu, K.L. d'Entremont, An investigation into dynamic measures of vehicle rollover propensity, SAE Technical Paper 930831 (1993) .
[110] A. Bozorgebrahimi, R. Hall, M. Morin, Equipment size effects on open pit mining performance, International Journal of Surface Mining, Reclamation and Environment 19 (2005) 41-56. 
[111] R. Jois, Haul road design and road safety, QRC H&S Conference, (2011) 1-9.
[112] O.M. Gonzalez, J.C. Jauregui, A. Lozano, G. Herrera, Effect of road profile on heavy vehicles with air suspension, International Journal of Heavy Vehicle Systems 14 (2007) 98-110. 
[113] MSC Adams Documentation, "Tire models contact methods," 2010.
[114] B. Duprey, M. Sayers, T. Gillespie, Simulation of the performance based standards (PBS) low-speed 90 turn test in TruckSim by jumping back in time, SAE Technical Paper 2013-01-2374 (2013) .
[115] Y. He, J. Yang and W. M. Zhang, "YCK50R design manual," University of Science and Technology Beijing, Department of Vehicle Engineering, 2011 (Unpublished).
[116] Y. He, "Performance Analysis and Parameter Optimization of Mining Truck Hydro-pneumatic Suspension Based on Ride Comfort," Doctoral Thesis, University of Science and Technology Beijing, 2013. 
[117] K. Wang, "Dynamic analysis of a tracked snowplowing vehicle and assessment of ride quality," Master Thesis, Concordia University, 1998. 
[118] S. Rakheja, K. Wang, R. Bhat, P.-. Boileau, Enhancement of ride vibration environment of tracked sidewalk snowploughs: Vehicle modelling and analysis, International Journal of Vehicle Design 30 (2002) 193-222. 
[119] J.E. Bernard, C.L. Clover, Tire modeling for low-speed and high-speed calculations, SAE Technical Paper 950311 (1995) .
[120] ISO/TC108/SC2/WG4 N57, Reporting Vehicle Road Surface Irregularities, 1982.
[121] H.M. Ngwangwa, P.S. Heyns, Application of an ANN-based methodology for road surface condition identification on mining vehicles and roads, Journal of Terramechanics 53 (2014) 59-74. 
[122] Y. Fujimoto, Spectrum analysis of road roughness for earthmoving machinery, Journal of Terramechanics 20 (1983) 43-60. 
[123] M. W. Sayers, Dynamic Terrain Inputs to Predict Structural Integrity of Ground Vehicles, 1988.
[124] P. Uys, P.S. Els, M. Thoresson, Suspension settings for optimal ride comfort of off-road vehicles travelling on roads with different roughness and speeds, Journal of Terramechanics 44 (2007) 163-175. 
[125] K. Shin and J. Hammond, Fundamentals of Signal Processing for Sound and Vibration Engineers, John Wiley & Sons, 2008.
[126] P. Dudziński, Design characteristics of steering systems for mobile wheeled earthmoving equipment, Journal of Terramechanics 26 (1989) 25-82. 
[127] C. Altafini, Why to use an articulated vehicle in underground mining operations, Proceedings of the IEEE International Conference on Robotics and Automation, Detroit, (1999) 3020-3025.
[128] Z. Yao, G. Wang, X. Li, J. Qu, Y. Zhang, Y. Yang, Dynamic simulation for the rollover stability performances of articulated vehicles, Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering 228 (2014) 771-783. 
[129] P. Liu, J. Caroux, Steer laws for steerable trailer axles to reduce tire wear, SAE International Journal of Commercial Vehicles 4 (2011) 31-39. 
[130] M.M. Islam, Y. He, S. Zhu, Q. Wang, A comparative study of multi-trailer articulated heavy-vehicle models, Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering 229 (2015) 1200-1228. 
[131] Y. Yin, S. Rakheja, J. Yang, P. Boileau, Analysis of a flow volume regulated frame steering system and experimental verifications, SAE Technical Paper 2015-01-2740 (2015) .
[132] A. Rehnberg, L. Drugge, A.S. Trigell, Snaking stability of articulated frame steer vehicles with axle suspension, International Journal of Heavy Vehicle Systems 17 (2010) 119-138. 
[133] L. Chen, Y. Shieh, Jackknife prevention for articulated vehicles using model reference adaptive control, Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering 225 (2011) 28-42. 
[134] S. S. Rao, Mechanical Vibrations, Prentice Hall, 2010.
[135] R. Sharp, M.A. Fernandez, Car-caravan snaking: Part 1: The influence of pintle pin friction, Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 216 (2002) 707-722. 
[136] J. Darling, D. Tilley, B. Gao, An experimental investigation of car—trailer high-speed stability, Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering 223 (2009) 471-484. 
[137] W. Wang, D. Yu, Y. Huang, Z. Zhou, R. Xu, A locomotive’s dynamic response to in-service parameter variations of its hydraulic yaw damper, Nonlinear Dynamics 77 (2014) 1485-1502. 
[138] W. Smith, N. Zhang, Hydraulically interconnected vehicle suspension: Optimization and sensitivity analysis, Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering 224 (2010) 1335-1355. 
[139] W. Sochacki, Modelling and analysis of damped vibration in hydraulic cylinder, Mathematical and Computer Modelling of Dynamical Systems 21 (2015) 23-37. 
[140] B. Nau, An historical review of studies of polymeric seals in reciprocating hydraulic systems, Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 213 (1999) 215-226. 
[141] G.K. Nikas, R.S. Sayles, Study of leakage and friction of flexible seals for steady motion via a numerical approximation method, Tribology International 39 (2006) 921-936. 
[142] J. Dixon, The Shock Absorber Handbook, John Wiley & Sons, 2008.
[143] F. Han, Personal communications – steering valve flow characteristics, Xuzhou Construction Machinery Group (XCMG) China (2014 (Unpublished)) .
[144] X. Ding, S. Mikaric, Y. He, Design of an active trailer-steering system for multi-trailer articulated heavy vehicles using real-time simulations, Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering 227 (2013) 643-655. 
[145] J. Yang, B. Zhang and W. M. Zhang, Design Manual of the 35 T Articulated Mining Dump Truck, Document, University of Science and Technology Beijing, Beijing, People's Republic of China: 2013.
[146] Y. Yin, S. Rakheja, J. Yang, P. Boileau, Effect of articulated frame steering on the transient yaw responses of the vehicle, Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering (2017) 0954407017702987. 
[147] Q. Wei, B. Zhu, B. Jing, H. Liu, M. Liu, Optimization design of loader steering mechanism based on MATLAB, IEEE 10th International Conference on Computer-Aided Industrial Design & Conceptual Design, Wenzhou, (2009) 751-754.
[148] Z. Zhao, J. Wang, Fuzzy optimal design of articulated dump truck's steering mechanism, 2011 International Conference on Consumer Electronics, Communications and Networks (CECNet), XianNing, (2011) 4093-4096.
[149] B.K.S. Thulasiraman, G. Arumugam, N.G. Sadali, I. Neelamegan, Steering linkage optimization of articulated construction equipment, The 1st International and 16th National Conference on Machines and Mechanisms (iNaCoMM2013), IIT Roorkee, India, (2013) 404-411.
[150] R.T. Marler, J.S. Arora, Survey of multi-objective optimization methods for engineering, Structural and Multidisciplinary Optimization 26 (2004) 369-395. 
[151] I.Y. Kim, O. De Weck, Adaptive weighted-sum method for bi-objective optimization: Pareto front generation, Structural and Multidisciplinary Optimization 29 (2005) 149-158. 
[152] R.T. Marler, J.S. Arora, The weighted sum method for multi-objective optimization: New insights, Structural and Multidisciplinary Optimization 41 (2010) 853-862. 
[153] Y. He, M.M. Islam, S. Zhu, T. Hu, A design synthesis framework for directional performance optimization of multi-trailer articulated heavy vehicles with trailer lateral dynamic control systems, Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering 0 (2016) 1-30. 
[154] T.L. Saaty, Decision-making with the AHP: Why is the principal eigenvector necessary, European Journal of Operational Research 145 (2003) 85-91. 
[155] N.L. Azad, A. Khajepour, J. McPhee, Analysis of jackknifing in articulated steer vehicles, Vehicle Power and Propulsion, (2005) 86-90.
[156] J. Yu, Z. Chen, Y. Lu, The variation of oil effective bulk modulus with pressure in hydraulic systems, Journal of Dynamic Systems, Measurement, and Control 116 (1994) 146-150. 
[157] S. Kim, H. Murrenhoff, Measurement of effective bulk modulus for hydraulic oil at low pressure, Journal of Fluids Engineering 134 (2012) 021201. 
[158] J. Lee, H. Shin, H. Jo, A study of the effects of entrained air in a hydraulic brake actuator, Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering 222 (2008) 285-292. 
[159] T.L. Saaty, A scaling method for priorities in hierarchical structures, Journal of Mathematical Psychology 15 (1977) 234-281. 
[160] J. Arora, Introduction to Optimum Design, Academic Press, 2004.
[161] Matlab R2016b, "Simulink Design Optimization Documentation," 2016. 
[162] K.R. Davey, Latin hypercube sampling and pattern search in magnetic field optimization problems, IEEE Transactions on Magnetics 44 (2008) 974-977. 
[163] M. Franchini, G. Galeati, S. Berra, Global optimization techniques for the calibration of conceptual rainfall-runoff models, Hydrological Sciences Journal 43 (1998) 443-458. 
[164] D. Cao, S. Rakheja, C. Sandu, Special issue on interdisciplinary aspects of vehicle system dynamics integration, 25 (2011) e1-e3. 
[165] D. Cao, X. Song, M. Ahmadian, Editors’ perspectives: Road vehicle suspension design, dynamics, and control, Vehicle System Dynamics 49 (2011) 3-28. 
[166] C. Lee, B. Moon, Simulation and experimental validation of vehicle dynamic characteristics for displacement-sensitive shock absorber using fluid-flow modelling, Mechanical Systems and Signal Processing 20 (2006) 373-388. 
[167] A. Rehnberg, L. Drugge, Ride comfort simulation of a wheel loader with suspended axles, International Journal of Vehicle Systems Modelling and Testing 3 (2008) 168-188. 
[168] Y. Yin, S. Rakheja, P. Boileau, A roll stability performance measure for off-road vehicles, Journal of Terramechanics 64 (2016) 58-68. 
[169] W.A. Smith, N. Zhang, W. Hu, Hydraulically interconnected vehicle suspension: Handling performance, Vehicle System Dynamics 49 (2011) 87-106. 
[170] H. Ren, S. Chen, Y. Zhao, G. Liu, L. Yang, State observer-based sliding mode control for semi-active hydro-pneumatic suspension, Vehicle System Dynamics 54 (2016) 168-190. 
[171] X. Sun, C. Yuan, Y. Cai, S. Wang, L. Chen, Model predictive control of an air suspension system with damping multi-mode switching damper based on hybrid model, Mechanical Systems and Signal Processing 94 (2017) 94-110. 
[172] K. Guo, Y. Chen, Y. Yang, Y. Zhuang, Y. Jia, Modeling and simulation of a hydro-pneumatic spring based on internal characteristics, Second International Conference on Mechanic Automation and Control Engineering, Hohhot, (2011) 5910-5915.
[173] J. Yang, J.F. Zhao, Y.H. Shen, C.Y. Duan, Influence of variety of oil temperature on performance of hydro-pneumatic suspension, Applied Mechanics and Materials, (2011) 705-710.
[174] P. Els, B. Grobbelaar, Heat transfer effects on hydropneumatic suspension systems, Journal of Terramechanics 36 (1999) 197-205. 
[175] Y. Shen, J. Zhao, J. Yang, X. Huang, Research on test and simulation of hydro-pneumatic suspension, International Conference on Consumer Electronics, Communications and Networks (CECNet), (2011) 678-681.
[176] P. Czop, D. SŁawik, A high-frequency first-principle model of a shock absorber and servo-hydraulic tester, Mechanical Systems and Signal Processing 25 (2011) 1937-1955. 
[177] H. Gholizadeh, D. Bitner, R. Burton, G. Schoenau, Modeling and experimental validation of the effective bulk modulus of a mixture of hydraulic oil and air, Journal of Dynamic Systems, Measurement, and Control 136 (2014) 051013. 
[178] D. Cao, S. Rakheja, C. Su, Pitch plane analysis of a twin-gas-chamber strut suspension, Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering 222 (2008) 1313-1335. 
[179] S.F. Van Der Westhuizen, P.S. Els, Comparison of different gas models to calculate the spring force of a hydropneumatic suspension, Journal of Terramechanics 57 (2015) 41-59. 
[180] K. Küçük, H.K. Yurt, K.B. Arıkan, H. İmrek, Modelling and optimization of an 8× 8 heavy duty vehicle's hydro-pneumatic suspension systemMpa, International Journal of Vehicle Design 71 (2016) 122-138. 
[181] J. Swevers, F. Al-Bender, C.G. Ganseman, T. Projogo, An integrated friction model structure with improved presliding behavior for accurate friction compensation, IEEE Transactions on Automatic Control 45 (2000) 675-686. 
[182] F. Al-Bender, V. Lampaert, J. Swevers, The generalized maxwell-slip model: A novel model for friction simulation and compensation, IEEE Transactions on Automatic Control 50 (2005) 1883-1887. 
[183] M. Ruderman, T. Bertram, Two-state dynamic friction model with elasto-plasticity, Mechanical Systems and Signal Processing 39 (2013) 316-332. 
[184] B. Armstrong and C. C. Wit, Friction Modeling and Compensation, CRC Press, 1995.
[185] MathWorks, "Friction in contact between moving bodies," Matlab R2016b Documentation, 2016. 
[186] N.L. Azad, A. Khajepour, J. Mcphee, Robust state feedback stabilization of articulated steer vehicles, Vehicle System Dynamics 45 (2007) 249-275. 
[187] T.H. Langer, T.K. Iversen, O.Ø Mouritsen, M.K. Ebbesen, M.R. Hansen, Suspension system performance optimization with discrete design variables, Structural and Multidisciplinary Optimization 47 (2013) 621-630. 
[188] T.H. Langer, B.B. Christensen, O.Ø Mouritsen, M.R. Hansen, Optimization of front axle suspension system of articulated dump truck, 1st Joint International Conference on Multibody System Dynamics, (2010) .
[189] Y. Yin, S. Rakheja, J. Yang, P. Boileau, Characterization of a hydro-pneumatic suspension strut with gas-oil emulsion, Mechanical Systems and Signal Processing (2017 (submitted)) .
[190] MSC Software, "ADAMS help documentation," 2013.