1.	T. McQuigg, R. Kapania, S. Scotti, S. Walker Compression after impact analysis on thin face sheet honeycomb core sandwich panels J Spacecraft Rockets, 51 (2014), pp. 200–212
2.	Shipsha, D. Zenkert Compression-after-Impact strength of sandwich panels with core crushing damage Appl Compos Mater, 12 (2005), pp. 149–164
3.	F. Edgren, L. Asp, P. Bull Compressive failure of impacted NCF composite sandwich panels - characterisation of the failure process J Compos Mater, 38 (2004), pp. 495–514
4.	D. Zenkert, A. Shipsha, P. Bull, B. Hayman Damage tolerance assessment of composite sandwich panels with localised damage Compos Sci Technol, 65 (2005), pp. 2597–2611
5.	M.F. Shi, J.A. Brindza, P.F. Michel, P. Bucklin, P.J. Belanger, J.M. Prencipe Static and dynamic dent resistance performance of automotive steel body panels SAE Tech Paper Series (1997)
6.	G. Ekstrand, N. Asnafi On testing of the stiffness and the dent resistance of autobody panels Mater Des, 19 (1998), pp. 145–156
7.	N. Asnafi On strength, stiffness and dent resistance of car body panels J Mater Process Technol, 49 (1995), pp. 13–31
8.	N. Asnafi, G. Langstedt, C. Andersson, N. Östergren, T. Håkansson A new lightweight metal-composite-metal panel for applications in the automotive and other industries Thin-Walled Struct, 36 (2000), pp. 289–310
9.	J. Laliberté, P. Straznicky, C. Poon Impact damage in fiber metal laminates, Part 1: experiment AIAA J, 43 (2005), pp. 2445–2453
10.	K. Raju, B. Smith, J. Tomblin, K. Liew, J. Guarddon Impact damage resistance and tolerance of honeycomb core sandwich panels J Compos Mater, 42 (2008), pp. 385–412
11.	R. Růžek, R. Lohonka, J. Jironč Ultrasonic C-Scan and shearography NDI techniques evaluation of impact defects identification NDT E Int, 39 (2006), pp. 132–142
12.	S. Holmberg, P. Thilderkvist Influence of material properties and stamping conditions on the stiffness and static dent resistance of automotive panels Mater Des, 23 (2002), pp. 681–691
13.	S. Holmberg, B. Nejabat Numerical assessment of stiffness and dent properties of automotive exterior panels Mater Des, 25 (2004), pp. 361–368
14.	R. Marani, M. Nitti, G. Cicirelli, T. D'Orazio, E. Stella High-resolution laser scanning for three-dimensional inspection of drilling tools Adv Mech Eng, 5 (2013), p. 620786
15.	G. Godin, J. Beraldin, J. Taylor, L. Cournoyer, M. Rioux, S. El-Hakim, R. Baribeau, F. Blais, P. Boulanger, J. Domey, M. Picard Active 3D laser imaging for heritage applications IEEE Comput Graph Appl Mag, 22 (2002), pp. 24–35
16.	G. Pavlidis, A. Koutsoudis, F. Arnaoutoglou, V. Tsioukas, C. Chamzas Methods for 3D digitization of cultural heritage J Cult Herit, 8 (2007), pp. 93–98
17.	P. Boulanger, J. Taylor, S. El-Hakim, M. Rioux How to virtualize reality: an application to the re-creation of world heritage sites , Proceedings of the conference on virtual systems multiMedia. Gifu, Japan, (1998), pp. 18–20
18.	G. Sansoni, F. Docchio 3-D optical measurements in the field of cultural heritage: the case of the Vittoria Alata of Brescia IEEE Trans Instr Meas, 54 (2005), pp. 359–368
19.	Levoy, M.; Ginsberg, J.; Shade, J.; Fulk, D.; Pulli, K.; Curless, B.; Rusinkiewicz, S.; Koller, D.; Pereira, L.; Ginzton, M.; Anderson, S.; Davis, J, The digital Michelangelo project. In Proceedings of the 27th annual conference on Computer graphics and interactive techniques - SIGGRAPH 00. New Orleans, Louisiana, USA, July 23-28, 2000.
20.	G. Guidi, J. Beraldin, C. Atzeni High-accuracy 3-d modeling of cultural heritage: the digitizing of Donatello's “Maddalena” IEEE Trans Image Process, 13 (2004), pp. 370–380
21.	S. Paquette 3D scanning in apparel design and human engineering IEEE Comput Graph Appl Mag, 16 (1996), pp. 11–15
22.	G. Sansoni, M. Trebeschi, F. Docchio State-of-The-Art and applications of 3D imaging sensors in industry, cultural heritage, medicine, and criminal investigation Sensors, 9 (2009), pp. 568–601
23.	A. Kuş Implementation of 3D optical scanning technology for automotive applications Sensors, 9 (2009), pp. 1967–1979
24.	S. Son, H. Park, K. Lee Automated laser scanning system for reverse engineering and inspection Int J Mach Tool Manufact, 42 (2002), pp. 889–897
25.	P. Hong-Seok, T. Mani Development of an inspection system for defect detection in pressed parts using laser scanned data Procedia Eng, 69 (2014), pp. 931–936
26.	F. Prieto, T. Redarce, R. Lepage, P. Boulanger An automated inspection system Int J Adv Manuf Technol, 19 (2002), pp. 917–925
27.	Q. Li, M. Yao, X. Yao, B. Xu A real-time 3D scanning system for pavement distortion inspection Meas Sci Technol, 21 (2009), p. 015702
28.	J. Yoon, M. Sagong, J. Lee, K. Lee Feature extraction of a concrete tunnel liner from 3D laser scanning data NDT E Int, 42 (2009), pp. 97–105
29.	G. Teza, A. Galgaro, F. Moro Contactless recognition of concrete surface damage from laser scanning and curvature computation NDT E Int, 42 (2009), pp. 240–249
30.	J. Hoła, Ł. Sadowski, J. Reiner, S. Stach Usefulness of 3D surface roughness parameters for nondestructive evaluation of pull-off adhesion of concrete layers Construct Build Mater, 84 (2015), pp. 111–120
31.	M. Tarabini, H. Giberti, S. Giancola, M. Sgrenzaroli, R. Sala, F. Cheli A moving 3D laser scanner for automated underbridge inspection Machines, 5 (2017), p. 32
32.	J. Krejsová, M. Doleželová, A. Vimmrová Evaluation of fine aggregate surface and fracture surface by confocal microscope Key Eng Mater, 760 (2018), pp. 245–250
33.	C. Noss, J. Wilkinson, A. Lorke Triangulation hand-held laser-scanning (TriHaLaS) for micro- and meso-habitat surveys in streams Earth Surf Process Landforms (2017)
34.	Z. Hu, S. Wei, J. Jiang Application of 3D laser scanning technology in inspection and dynamic reserves detection of open-pit mine J Phys Conf, 910 (2017), p. 012046
35.	NDT Solutions for Pipeline Inspection and Aircraft Inspection. https://www.creaform3d.com/en/ndt-solutions (accessed Nov 3, 2017).
36.	3D Systems, Inc User guide: geomagic design X (2013)
37.	T. Reyno, P.R. Underhill, T.W. Krause, C. Marsden, D. Wowk Surface profiling and core evaluation of aluminum honeycomb sandwich aircraft panels using multi-frequency eddy current testing Sensors, 9 (2017), p. 2114