[1] 	S. V. Hoa, "Automated composites manufacturing," Science and Engineering of Composite Materials, p. 113, March 2015. 
[2] 	Composites World, "A350 XWB update: Smart manufacturing," 1 September 2011. [Online]. Available: http://www.compositesworld.com/articles/a350-xwb-update-smart-manufacturing. [Accessed 1 March 2017].
[3] 	Seattle Times, "Massive, speedy robots ready to build composite wings for Boeing 777X," 5 February 2016. [Online]. Available: http://www.seattletimes.com/business/boeing-aerospace/massive-speedy-robots-ready-to-build-composite-wings-for-boeing-777x/. [Accessed 1 March 2017].
[4] 	Composites World, "The market for OOA aerocomposites," 4 March 2014. [Online]. Available: http://www.compositesworld.com/articles/the-market-for-ooa-aerocomposites-2013-2022. [Accessed 2 March 2017].
[5] 	R. Tong, S.V. Hoa, M. Chen, "Cost Analysis on L-shape Composite Component Manufacturing," in Proceedings of 18th International Conference on composite materials, 2011. 
[6] 	R.A. Witik et al., "Assessing the economic and environmental potential of out of autoclave processing," in Proceedings of 18th International Conference on composite materials, Jeju Island, 2011. 

[7] 	D. Lukaszewicz. C. Ward, K. Potter, "The engineering aspects of automated prepreg layup: History, present and future," Composites Part B: Engineering, vol. 43, no. 3, pp. 997-1009, 2011. 
[8] 	Compostes World, "The Markets: Aerospace (2015)," 12 1 2015. [Online]. Available: http://www.compositesworld.com/articles/the-markets-aerospace-2015. [Accessed 1 April 2017].
[9] 	J. Sloan, "ATL and AFP: Defining the megatrends in composite aerostructures," Composites World, 30 June 2008. [Online]. Available: http://www.compositesworld.com/articles/atl-and-afp-defining-the-megatrends-in-composite-aerostructures. [Accessed 25 August 2017].
[10] 	Electroimpact, "Composite Manufacturing," Electroimpact Inc., 2017. [Online]. Available: https://www.electroimpact.com/Products/Composites/Overview.aspx. [Accessed 28 August 2017].
[11] 	Automated Dynamics, "Automation Equipment: Media Galleries," 2017. [Online]. Available: http://www.automateddynamics.com/automation-equipment. [Accessed 28 August 2017].
[12] 	K. K. Subramanian, "Why carbon fiber is preferred for aircraft bodies?," Quora, 9 March 2017. [Online]. Available: https://www.quora.com/Why-carbon-fiber-is-preferred-for-aircraft-bodies. [Accessed 28 August 2017].
[13] 	D. Dawson, "Automation: Robots taking off in commercial aircraft," Composites World, 26 February 2016. [Online]. Available: http://www.compositesworld.com/articles/automation-robots-taking-off-in-commercial-aircraft. [Accessed 28 August 2017].
[14] 	G. Gardiner, "Out-of-Autoclave prepregs: Hype or Revolution?," Composites World, 1 Jan 2011. [Online]. Available: http://www.compositesworld.com/articles/out-of-autoclave-prepregs-hype-or-revolution. [Accessed 22 August 2017].
[15] 	T. Centea, L.K. Grunenfelder, S.R. Nutt, "A review of out-of-autocalve prepregs - Material properties, process phenomena, and manufacturing considerations," Composites Part A: Applied Science and Manufacturing, vol. 70, no. 2015, pp. 123-154, 2015. 
[16] 	S. V. Hoa, Principles of the Manufacturing of Composite Materials, Montreal: DEStech Publications, 2017. 
[17] 	Owens Corning, "Multiaxial Non-Crimp Fabric (NFC) Reinforcements," February 2014. [Online]. Available: https://dcpd6wotaa0mb.cloudfront.net/mdms/dms/CSB/10018955/10018955-%E2%80%93-Multiaxial-NCF-brochure.pdf. [Accessed 23 August 2017].
[18] 	S. V. Lomov, Non-Crimp Fabric Composites: Manufacturing, Properties and Application, Cambridge: Woodhead Publishing Limited, 2011. 
[19] 	G.A. Bibo, P.J. Hogg, M. Kemp, "Mechanical Characterization of Glass and Carbon Fiber Reinforced Composite made with Non-Crimp Fabrics," Composite Science and Technology, vol. PII, no. 57, pp. 1221-1241, 1997. 
[20] 	G. Gardiner, "CSeries Composite Wing," Composites World, 14 October 2013. [Online]. Available: http://www.compositesworld.com/blog/post/cseries-composite-wing. [Accessed 23 August 2017].
[21] 	Bombardier Aerospace, CSeries - Transonic Wing, Belfast: YouTube, 2013. 
[22] 	G. Marsh, "Bombardier throws down the gauntlet with CSeries airliner," Reinforced Plastics, vol. 55, no. 6, pp. 22-26, 2011. 
[23] 	X. Song, "Vacuum Assisted Resin Transfer Molding (VARTM): Model Development and Verification," Ph.D. dissertation, Virginia Polytechnic Institute and State University, Blacksburg, 2003.
[24] 	L. Aktas, D.P. Bauman, S.T. Bowen, M. Saha, M.C. Altan, "Effect of Distribution Media Length and Multiwalled Carbon Nanotubes on the Formation of Voids in VARTM Composites," Journal of Engineering Materials and Technology, vol. 133, no. 4, pp. 1-9, 14 October 2011. 
[25] 	Mitsubishi Heavy Industies Ltd., "Research in the Application of the VaRTM Technique to the Fabrication of Primary Aircraft Composite Structures," Mitsubishi Heavy Industies Technical Review, vol. 42, no. 5, 2005. 
[26] 	NLR, "NLR wins award for new fiber placement processes," 30 January 2012. [Online]. Available: http://www.nlr.org/news/nlr-wins-award-for-new-fibre-placement-processes/. [Accessed 13 September 2017].
[27] 	NLR Aerospace, "AUTOW: Automated Preform Fabrication by Dry Tow Placement," January 2009. [Online]. Available: https://trimis.ec.europa.eu/sites/default/files/project/documents/20120519_102727_52292_autow.pdf. [Accessed 15 Dec 2017].
[28] 	European Commission, "Community Research and Development Information Service," 25 May 2017. [Online]. Available: http://cordis.europa.eu/project/rcn/91195_en.html. [Accessed 14 September 2017].
[29] 	M. Belhaj et al., "Dry fiber automated placement of carbon fibrous preforms," Elsevier, vol. Composites: Part B, pp. 107-111, 2013. 

[30] 	R. Graupner, "Presentations: LCC-symposium," 24 October 2014. [Online]. Available: http://www.lcc.mw.tum.de/en/5th-anniversary-of-lcc/symposium/presentations/. [Accessed 1 November 2017].
[31] 	O. Rimmer, D. Becker, P. Mitschang, "Maximizing the out-of-plane-permeability of preforms manufactured by dry fiber placement," Polymer & Composite Science, vol. 2, no. 3-4, pp. 93-102, 2016. 
[32] 	Hexcel, "HiTape: A new efficient composite solution for Primary Aircraft Structures," 2018. [Online]. Available: http://www.hexcel.com/user_area/content_media/raw/HiTape.pdf. [Accessed 26 February 2018].
[33] 	G. Dell'Anno et al., "Automated manufacture of 3D reinforced aerospace composite structures," International Journal of Structural Integrity, vol. 3, no. 1, pp. 22-40, 2012. 
[34] 	L. Veldenz et al., "Characteristics and Processability of Bindered Dry Fiber Material for Automated Fiber Placement," in 17th European Conference on Composite Materials, Munich, 2016. 
[35] 	R. L. Pinckney, "Fabrication of the V-22 composite aft fuselage using automated fiber placement," 1993. [Online]. Available: https://ntrs.nasa.gov/archive/nasa/casi.ntrs.nasa.gov/19930021254.pdf. [Accessed 24 August 2017].
[36] 	Hexcel, "HexTow IM7 Carbon Fiber," Hexcel, 2016. [Online]. Available: http://www.hexcel.com/user_area/content_media/raw/IM7_HexTow_DataSheet.pdf. [Accessed 1 September 2017].

[37] 	Cytec Industries, "PRISM™ EP2400 RESIN SYSTEM," 12 March 2012. [Online]. Available: https://www.cytec.com/sites/default/files/datasheets/PRISM_EP2400_031912.pdf. [Accessed 1 January 2017].
[38] 	Brookfield Ametek, "Brookfield CAP 2000+ Operating Instructions," [Online]. Available: http://www.brookfieldengineering.com/-/media/ametekbrookfield/manuals/lab%20viscometers/cap2000%20instructions.pdf?la=en. [Accessed 15 July 2017].
[39] 	Epoxy Technology Inc., "Tg-Glass Transition Temperature for Epoxies," 2012. [Online]. Available: http://www.epotek.com/site/files/Techtips/pdfs/tip23.pdf. [Accessed 27 July 2017].
[40] 	PerkinElmer, "Dynamic MEchanical Analysis (DMA): A Beginner's Guide," 2013. [Online]. Available: http://www.perkinelmer.ca/CMSResources/Images/44-74546GDE_IntroductionToDMA.pdf. [Accessed 5 August 2017].
[41] 	C.F. Bandeira et al., "Comparison of Glass Transition Temperature Values of Composite Polymer Obtained by TMA and DSC," Applied Mechanics and Materials, Vols. 719-720, pp. 91-95, 2015. 
[42] 	TA Instruments, "Interpreting Unexpected Events and Transitions in DSC Results," [Online]. Available: http://www.tainstruments.com/pdf/literature/TA039.pdf. [Accessed 1 August 2017].
[43] 	National Institute for Aviation Research, "Hexcel 8552 IM& Unidirectional Prepreg," Wichita State University, Wichita, 2011.

[44] 	M. Scafè et al., "Experimental determination of compressive strength of an unidirectional composite lamina: indirect estimate by Using Back-out Factor (BF)," in Convegno Nazionale IGF XXII, Rome, 2013. 
[45] 	HEXCEL, "HexPly 8552 Epoxy Matrix," Hexcel, 2014.
[46] 	Cytec Industies, "CYCOM 5320-1 Epoxy Resin System," October 2015. [Online]. Available: https://www.cytec.com/sites/default/files/datasheets/CYCOM%205320-1%20Rev%20CR5.pdf. [Accessed 8 August 2017].
[47] 	CHM-17, COMPOSITE MATERIALS HANDBOOK: VOLUME 1 POLYMER MATRIX COMPOSITES GUIDELINES FOR CHARACTERIZATION OF STRUCTURAL MATERIALS, SAE International, 2012. 
[48] 	Control Panels Incorporated, "Blue M Lo-850 Lab Oven, 30 cu. ft.," 2018. [Online]. Available: http://www.cpiheat.com/Blue-M-Lab-Ovens-p/881011.htm. [Accessed 11 February 2018].
[49] 	Fiberglass Supply, "Carbon Fiber and Composite Supplies," [Online]. Available: http://www.fiberglasssupply.com/Product_Catalog/Vacuum_Bagging/vacuum_bagging.html. [Accessed 9 January 2018].
[50] 	Heraeus, "Intelligent heat for Automated Fibre Placement," in proceedings of International Symposium on Automated Composites Manufacturing (ACM4), Montreal, 2017.