Aguero, A., Izvernari, C., Tremblay, R. (2006). “Modelling of the Seismic Response of Concentrically Braced Steel Frames Using the OpenSees Analysis Environment”. International Journal of Advanced Steel Construction, Vol. 2-3, pp. 242-274.
Archambault, M.H. (1995). “Etude du Comportement Seismique des Contreventements Ductile en X avec Profiles Tubulaires en Acier”. Ecole Polytechnique, Montreal, Canada, Report no. EPM/GCS-1995-09.
ASCE. (2010). “Minimum design loads for buildings and other structures”. ASCE/Structural Engineering Institute (SEI) 7-10, Reston, VA.
ASCE. (2013). “Seismic rehabilitation of existing buildings.” ASCE/Structural Engineering Institute (SEI) 41-13, Reston, VA.
Atkinson, G., Goda, K. (2011). “Effects of seismicity models and new ground-motion prediction equations on seismic hazard assessment for four Canadian cities”. Bull. Seismol. Soc. Am. 101 (2011) 176–189.
Baker, J. W. (2015). “Efficient analytical fragility function fitting using dynamic structural analysis”.  Earthquake Spectra: February 2015, Vol. 31, No. 1, pp. 579-599. 
Baker, J. W., and Cornell, C. A. (2005). “A vector-valued ground motion intensity measure consisting of spectral acceleration and epsilon”. Earthquake Engineering & Structural Dynamics, 34(10), 1193–1217.
Bosco, M., Marino, E.M. and Rossi, P.P. (2012). “Behavior Factor of Dual Concentrically Braced Systems Designed by Eurocode 8”. The 15th World Conference on Earthquake Engineering, 2012, Lisbon. 
Bosco M., Tirca L. (2017). “Numerical simulation of steel I-shaped beam using a fiber-based damage accumulation model”. Journal of Constructional Steel Research, Volume 133, June 2017, Pages 241-255.
Canadian Standards Association (CSA). (2014). “Design of Steel Structures”. S16.1-14 Standard, CSA, Mississauga, ON.
Chopra A. K., McKenna F. (2016). “Modeling viscous damping in nonlinear response history analysis of buildings for earthquake excitation”. Earthquake Engineering & Structural Dynamics,45:193–211.
Coffin L. (1954). “A study of the effect of cyclic thermal stress on a ductile metal”. Trans ASME, 76: 931-950.
CSI, ETABS Software, Computer and Structures Inc., Berkeley, California, 2009.
D’Aniello M., Landolfo R., Piluso V., Rizzano G. (2012). “Ultimate behaviour of steel beams under non-uniform bending”. Journal of Constructional Steel Research, 78: 144-158.
Dicleli, M. and Mehta, A. (2007). “Simulation of Inelastic Cyclic Buckling Behaviour of Steel Box Sections”. Computer and Structures Journal, pp. 446-457.
Ellingwood, B., Celik, O.C., Kinali, K. (2007). “Fragility assessment of building structural systems in Mid-America”. Earthquake Engineering & Structural Dynamics, 36, 1935-1952.
Engelhardt M.D., Sabol T.A. (1994). “Testing of welded steel moment connections in response to the Northridge Earthquake”. Progress report to the AISC advisory subcommittee on special moment resisting frame research.
Federal Emergency Management Agency (FEMA). (2000). “Recommended seismic design criteria for new steel moment-frame buildings”. FEMA 350, prepared by the SAC Joint Venture, Washington, D. C.
Federal Emergency Management Agency (FEMA). (2006). “Designing for Earthquakes: A Manual for Architects”. FEMA 454, Washington, DC.
Federal Emergency Management Agency (FEMA). (2009). “Quantification of building seismic performance factors”. FEMA P695, Washington, DC.
Giugliano, M.T., Longo, A., Montuori, R., Piluso,V. (2010). “Failure Mode and Drift Control of MRF-CBF Dual Systems”. The Open Construction and Building Technology Journal, 2010, 4, 121-133.
Gómez, L.V.D. (2014). “Seismic Fragility Analysis of Steel Moment-Resisting Frames (MRF) Designed in Canada in the 1960s, 1980s, and 2010”. Master thesis, University of Toronto.
Hsiao, P.C., Leham, D., Roeder, C. (2013). “A Model to Simulate Special Concentrically Braced Frames Beyond Brace Fractrue”. Journal of Earthquake Engineering and Structural Dynamics, Vol. 42, pp. 182-200.
Hsiao, P.C., Lehman, D., Roeder, C. (2012). “Improved Analytical Model for Special Concentrically Braced Frames”. Journal of Constructional Steel Research, Vol. 73, pp.80-94.
Hwang, S., and Lignos, D.G. (2017). “Effect of Modeling Assumptions on the Earthquake-Induced Losses and Collapse Risk of Steel-Frame Buildings with Special Concentrically Braced Frames”. Journal of Structural Engineering, 143(9), 04017116-1, DOI:10.1061/(ASCE)ST.1943-541X.0001851.
Ibarra, L., Medina, R., and Krawinkler, H. (2002). “Collapse assessment of deteriorating SDOF systems.” Conf. Proc., 12th European Conference on Earthquake Engineering, London, Elsevier Science Ltd, paper no. 665.
Imanpour, A., Lignos, D., Clifton, C., Tremblay. R. (2016). “Comparison of Seismic Design Requirements for Steel Moment Resisting Frames with Emphasis on Stability of Columns in North America, New Zealand, And Europe”. 11th Pacific Structural Steel Conference, Shanghai, Oct. 26- 28, 2016.
Jain, A.K., Redwood, R.G. and Lu, F. (1993). “Seismic response of concentrically braced dual steel”. Canadian Journal of Civil Engineering 20, 672-687.
Khatib I.F., Mahin S.A., and Pister K.S. (1988). “Seismic behaviour of concentrically braced steel frames”. Earthquake Engineering Research Center, Report No. UCB/EERC-88/01. University of California.
Kiggins, S. and Uang, C. (2006). “Reducing residual drift of buckling-restrained braced frames as a dual system”. Engineering Structures, 28 (2006) 1525–1532.
Kim T., Whittaker AS, Gilani ASJ, Bertero VV, Takhirov SH. (2000). “Cover-Plate and Flange-Plate Reinforced Steel Moment resisting connections”. PEER report 2000/07. Pacific Earthquake Engineering Research Center, University of California, Berkeley.
Lamarche, C.P., and Tremblay, R. (2008). “Accounting for residual stresses in the seismic stability of nonlinear beam-column elements with cross-section fiber discretization”. Annual Stability Conference, 59-78.
Lay M.G. (1965). “Flange Local Buckling in Wide-Flange Shapes”. Journal of the Structural Division, ASCE, 91(6):95-115.
Lignos D.G, Krawinkler H. (2011). “Deterioration modelling of steel components in support of collapse prediction of steel moment frames under earthquake loading”. Journal of Structural Engineering, 137 (11): 1291-1302.
Lignos, D. and Karamanci, E. (2013). “Predictive Equations for Modelling Cyclic Buckling and Fracture of Steel Braces”. 10th International Conference on Urban Earthquake Engineering, Tokyo Institute of Technology, Tokyo, Japan.
Longo, A., Montuori R., Piluso,V. (2014). “Theory of plastic mechanism control for MRF–CBF dual systems and its validation”. Bull Earthquake Eng (2014) 12:2745–2775. DOI 10.1007/s10518-014-9612-2.
Longo, A., Montuori R., Piluso,V. (2016). “Moment frames – concentrically braced frames dual systems: analysis of different design criteria”. Structure and Infrastructure Engineering, 12:1, 122-141, DOI: 10.1080/15732479.2014.996164.
Nastri, E., Montuori, R. & Piluso, V. (2015). “Seismic Design of MRF-EBF Dual Systems with Vertical Links: EC8 vs Plastic Design”. Journal of Earthquake Engineering, 19:3, 480-504, DOI: 10.1080/13632469.2014.978917.
Manolache, L., Wang, Y., Tirca, L., Bagchi, A. (2017). “Vibration Characteristics of an Existing High-Rise Building in Montreal and the Effects of Retrofit”. EUROSTEEL Conference 2017, Copenhagen, Denmark.
Manson, S. (1965). “Fatigue: A complex subject – some simple approximations”. Experimental Mechanics 5 (7): 193-226.
Mazzolani, F.M., & Piluso, V. (1996). “Theory and design of seismic resistant steel frames”. London: E&FN Spon, an Inprint of Chapmon&Hall.
Mazzolani, F.M., & Piluso, V. (1997). “Plastic design of seismic resistant steel frames”. Earthquake Engineering and Structural Dynamics, 26, 167–191.
Mazzoni, S., McKenna, F., Scott, M., Fenves, G.L. et al., (2013). “Open system for earthquake engineering simulation”. OpenSees software, Pacific Earthquake Engineering Research Center (PEER), University of California, Berkeley.
McKenna, F., and Fenves, G. L. (2004). “Open system for earthquake engineering simulation (OpenSees)”. 〈http://www.opensees.berkeley.edu/index.html〉 (Mar. 5, 2015).
Montuori, R., Nastri, E. & Piluso, V. (2016). “Theory of Plastic Mechanism Control for MRF–EBF dual systems: Closed form solution”. Engineering Structures, Volume 118, 1 July 2016, Pages 287-306.
National Research Council of Canada (NRCC). (2015). “National Building Code of Canada. Associate Committee on the National Building Code”. NRCC, Ottawa, ON.
OpenSees version 2.4.6 [Computer software]. Berkeley, CA, Pacific Earthquake Engineering Research Center.
PEER/ATC. (2010). “Modeling and acceptance criteria for seismic design and analysis of tall buildings”. Rep. No. 72-1, ATC—Applied Technology Council, Redwood City, CA.
Pillai, S. (1974). “Beam-columns of hollow structural sections”. Can. J. Civ. Eng., 1(2), 194-198.

Ribeiro F.L., Barbosa A.R., Scott M.H., Neves L.C. (2015). “Deterioration modeling of steel Moment-resisting frames using finite-length plastic hinge force-based beam columns elements”. J. of Struct. Eng, 141(2), doi: 10.1061/(ASCE)ST.1943-541X.0001052.
Salawdeh, S. and Goggins, J. (2013). “Numerical Simulation for Steel Brace Members Incorporating a Fatigue Model”. Engineering Structures, Vol. 46, pp. 332-349.
Santagati, S., Bolognini, D., Nascimbene, R. (2012). “Strain Life Analysis at Low-cycle Fatigue on Concentrically Braced Steel Structures with RHS Shape Braces”. J. Earthquake Eng., Vol.16 (S1), pp. 107-137.
Tesfamariam, S., Goda. K. (2015). “Loss estimation for non-ductile reinforced concrete building in Victoria, British Columbia, Canada: effects of mega-thrust Mw9-class subduction earthquakes and aftershocks”. Earthq. Eng. Struct. Dyn., 44: 2303–2320. doi: 10.1002/eqe.2585. 
Tirca, L., Chen, L. (2014). “Numerical simulation of inelastic cyclic response of HSS braces upon fracture”, J. Adv. Steel Constr. 10 (4) 442–462.
Tirca, L., Chen, L., Tremblay, R. (2015). “Assessing collapse safety of CBF buildings subjected to crustal and subduction earthquakes”. Journal of Constructional Steel Research, Volume 115, December 2015, Pages 47-61.
Tirca, L., Serban, O., Lin L., Wang, M.Z., Lin, N., (2016). “Improving the seismic resilience of existing braced-frames office buildings”. Published in the Special Issue: Resilience-based analysis and design of structures and infrastructures. Journal of Structural Engineering (ASCE), Vol. 142, No. 8, 2016.
Tremblay, R. (2008). “Influence of Brace Slenderness on the Fracture Life of Rectangular Tubular Steel Bracing Members Subjected to Seismic Inelastic Loading”. Proc. 2008 ASCE Structures Congress, Vancouver, BC.
Tremblay, R., Archambault, M.H., Filiatrault. A. (2003). “Seismic Response of Concentrically Braced Steel Frames Made with Rectangular Hollow Bracing Members”. Journal of Structural Eng., ASCE, Vol. 129, No. 12, pp.1626-1636.2012.
Tsai, K.C., Popov, E.P. (1988). “Steel beam-column joints in seismic moment resisting frames”. Report no. UCB/EERC-88/19. Earthquake Engineering Research Center, Berkeley.
Uang, C.M., Latham C. (1995). “Cyclic test of full scale MNH-SMRFTH dual strong axis moment connections”. Report No. TR-"95/01, University of California, San Diego, USA.
Uriz, P. (2005). “Towards Earthquake Resistant Design of Concentrically Braced Steel Buildings”. Ph.D. Dissertation, University of California, Berkeley.
Uriz, P. and Mahin, S. (2008). “Toward Earthquake Resistant Design of Concentrically Braced Steel Frame Structures”. PEER Report.
Uriz, P., Filippou, F.C., Mahin, S. (2008). “Model for Cyclic Inelastic Buckling of Steel Braces”. Journal of Structural Engineering, ASCE, pp. 619-628.
Uriz, P., Mahin, S. (2008). “Toward Earthquake-Resistant Design of Concentrically Brace Steel-Frame Structures”. Pacific Earthquake Engineering Research Center (PEER) report, University of California, Berkeley.
Vamvatskos, D., Cornell, C.A. (2002). “Incremental Dynamic Analysis”. Earthquake Engng Struct. Dyn. 2002; 31:491–514 (DOI: 10.1002/eqe.141). 
Vamvatskos, D., Cornell, C.A. (2004). “Applied Incremental Dynamic Analysis”. Earthquake Spectra: May 2004, Vol. 20, No. 2, pp. 523-553.
Wang, Y., Nastri, E., Tirca, L., Montuori, R., Piluso, V. (2018). “Comparative Response of Earthquake Resistant CBF Buildings Designed According to Canadian and European Code provisions”. Key Engineering Materials, Vol. 763, pp 1155-1163, Trans Tech Publications, Switzerland. 
Wen, Y.K., Ellingwood, B., and Bracci, J. (2004). “Vulnerability function framework for consequence-based engineering”. MAE Center Project DS-4 Report.
Whitmore, R.E. (1952). “Experimental investigation of stresses in gusset plates.” Bulletin No.16, Engineering Experiment Station, University of Tennessee.
Xie, Q. (2008). “Dual System Design of Steel Frames Incorporating Buckling-Restrained Braces”. The 14th World Conference on Earthquake Engineering, October 12-17, 2008, Beijing, China.
Yang, T.Y. and Mahin, S. (2005). “Limiting Net Section Fracture in Slotted Tube Braces”. Steel Tips, Structural Steel Education Council, Orinda, Ca.
Ziemian, R. (2010). “Guide to Stability Design Criteria for Metal Structures”. J. Wiley & Sons, 2010.