Zinberg H, Symonds MF. The development of an advanced composite tail rotor driveshaft. In: The 26th Annual Forum of the American Helicopter Society, Washington, DC, June 1970. M.-Y. Chang, J.-K. Chen, C.-Y. Chang A simple spinning laminated composite shaft model Int J Solids Struct, 41 (2004), pp. 637-662 M.-Y. Chang, J.H. Huang, C.-Y. Chang Vibration analysis of rotating composite shafts containing randomly oriented reinforcements Compos Struct, 63 (2004), pp. 21-32 A. Boukhalfa, A. Hadjoui Free vibration analysis of a rotating composite shaft using the p-version of the finite element method Int J Rotat Mach (2008), p. 10 Article ID: 752062 Al Muslmani M, Ganesan R. Rotor-dynamics of stepped composite shaft – disk systems based on a conventional composite finite element. In: American Society for Composites 27th Annual Technical Conference, Arlington, Texas; 2012. M.S. Qatu, J. Iqbal Transverse vibration of a two-segment cross-ply composite shafts with a lumped mass Compos Struct, 92 (2010), pp. 1126-1131 L. Chen, W. Peng Dynamic stability of rotating composite shaft under periodical axial compressive loads J Sound Vib, 212 (2) (1998), pp. 215-230 S. Na, H. Yoon, L. Librescu Effect of taper ratio on vibration and stability of a composite thin-walled spinning shaft Thin-Walled Struct, 44 (2006), pp. 362-371 L. Meirovitch, H. Baruh On the inclusion principle for the hierarchical finite element method Int J Numer Meth Eng, 19 (1983), pp. 281-291 Zhu D. Development of hierarchical finite element methods at BIAA, In: Proceedings of the international conference on computational mechanics, Tokyo I, p. 123–128; 1986. A. Houmat A sector Fourier p-element applied to free vibration analysis of sectorial plates J Sound Vib, 243 (2) (2001), pp. 269-282 West L, Bardell N, Dunsdon J, Loasby P. Some limitations associated with the use of K-orthogonal polynomials in hierarchical versions of the finite element method. In: The sixth international conference on recent advances in structural dynamics, Southampton; 1997. M. Friswell, J. Penny, S. Garvey, A. Lees Dynamics of rotating machines (1st ed.), Cambridge University Press (2010) T.C. Gmiir, J.D. Rodrigues Shaft finite elements for rotor dynamics analysis ASME Vibr Acoustic, 113 (1991), pp. 482-493 W. Kim, A. Argento, R.A. Scott Free vibration of a rotating tapered composite Timoshenko shaft J Sound Vib, 226 (1) (1999), pp. 125-147