[1]	S. V. Hoa, Principles of the manufacturing of composite materials. DEStech Publications, Inc, 2009.
[2]	J. Sloan, "ATL & AFP: Defining the megatrends in composite aerostructures," High performance composites, vol. 16, no. 4, p. 68, 2008.
[3]	Composites World Magazine. Available: www.compositesworld.com
[4]	B. Denkena, C. Schmidt, and P. Weber, "Automated Fiber Placement Head for Manufacturing of Innovative Aerospace Stiffening Structures," Procedia Manufacturing, vol. 6, pp. 96-104, 2016.
[5]	Y. Khaled and H. Mehdi, "Processing of thermoplastic matrix composites through automated fiber placement and tape laying methods: A review," Journal of Thermoplastic Composite Materials, p. 0892705717738305, 2017.
[6]	H.-J. L. Dirk, C. Ward, and K. D. Potter, "The engineering aspects of automated prepreg layup: History, present and future," Composites Part B: Engineering, vol. 43, no. 3, pp. 997-1009, 2012.
[7]	J. Frketic, T. Dickens, and S. Ramakrishnan, "Automated manufacturing and processing of fiber-reinforced polymer (FRP) composites: An additive review of contemporary and modern techniques for advanced materials manufacturing," Additive Manufacturing, vol. 14, pp. 69-86, 2017.
[8]	C. González, J. J. Vilatela, J. M. Molina-Aldareguía, C. S. Lopes, and J. Llorca, "Structural composites for multifunctional applications: Current challenges and future trends," Progress in Materials Science, vol. 89, no. Supplement C, pp. 194-251, 2017/08/01/ 2017.
[9]	R. J. Crossley, "Characterisation of tack for automated tape laying," PhD thesis, University of Nottingham, 2011.
[10]	K. Kendall, "Adhesion: molecules and mechanics," Science, vol. 263, no. 5154, pp. 1720-1725, 1994.
[11]	A. Tiwari et al., "The effect of surface roughness and viscoelasticity on rubber adhesion," Soft Matter, 10.1039/C7SM00177K vol. 13, no. 19, pp. 3602-3621, 2017.
[12]	B. Persson, O. Albohr, U. Tartaglino, A. Volokitin, and E. Tosatti, "On the nature of surface roughness with application to contact mechanics, sealing, rubber friction and adhesion," Journal of Physics: Condensed Matter, vol. 17, no. 1, p. R1, 2004.
[13]	K. L. Johnson, K. Kendall, and A. Roberts, "Surface energy and the contact of elastic solids," Proc. R. Soc. Lond. A, vol. 324, no. 1558, pp. 301-313, 1971.
[14]	B. Derjaguin, V. Muller, and Y. P. Toporov, "Effect of contact deformations on the adhesion of particles," Progress in Surface Science, vol. 45, no. 1-4, pp. 131-143, 1994.
[15]	D. Maugis, "Adhesion of spheres: the JKR-DMT transition using a Dugdale model," Journal of colloid and interface science, vol. 150, no. 1, pp. 243-269, 1992.
[16]	R. S. Bradley, "LXXIX. The cohesive force between solid surfaces and the surface energy of solids," The London, Edinburgh, and Dublin Philosophical Magazine and Journal of Science, vol. 13, no. 86, pp. 853-862, 1932.
[17]	W. Banks and C. Mill, "Tacky adhesion—a preliminary study," Journal of Colloid Science, vol. 8, no. 1, pp. 137-147, 1953.
[18]	D. Satas, Handbook of pressure sensitive adhesive technology. Van Nostrand Reinhold New York, 1989.
[19]	K. Ahn, J. Seferis, T. Pelton, and M. Wilhelm, "Analysis and characterization of prepreg tack," Polymer Composites, vol. 13, no. 3, pp. 197-206, 1992.
[20]	B. Duncan, S. Abbot, and R. Roberts, "Measurement Good Practice Guide No. 26: Adhesive tack," Repot 1999.
[21]	I. Mohammed, M. Charalambides, and A. Kinloch, "Modelling the interfacial peeling of pressure-sensitive adhesives," Journal of Non-Newtonian Fluid Mechanics, vol. 222, pp. 141-150, 2015.
[22]	I. Mohammed, M. Charalambides, and A. Kinloch, "Modeling the effect of rate and geometry on peeling and tack of pressure-sensitive adhesives," Journal of Non-Newtonian Fluid Mechanics, vol. 233, pp. 85-94, 2016.
[23]	C. Creton and M. Ciccotti, "Fracture and adhesion of soft materials: a review," Reports on Progress in Physics, vol. 79, no. 4, p. 046601, 2016.
[24]	A. Kinloch, C. Lau, and J. Williams, "The peeling of flexible laminates," International Journal of Fracture, vol. 66, no. 1, pp. 45-70, 1994.
[25]	Z. Peng, C. Wang, L. Chen, and S. Chen, "Peeling behavior of a viscoelastic thin-film on a rigid substrate," International Journal of Solids and Structures, vol. 51, no. 25-26, pp. 4596-4603, 2014.
[26]	A. Kinloch, H. Koay, S. Lee, and L. Ng, "Using the simple peel test to measure the adhesive fracture energy, Ga," 2012.
[27]	H. Lakrout, P. Sergot, and C. Creton, "Direct observation of cavitation and fibrillation in a probe tack experiment on model acrylic pressure-sensitive-adhesives," The Journal of Adhesion, vol. 69, no. 3-4, pp. 307-359, 1999.
[28]	Y. Peykova, S. Guriyanova, O. V. Lebedeva, A. Diethert, P. Müller-Buschbaum, and N. Willenbacher, "The effect of surface roughness on adhesive properties of acrylate copolymers," International Journal of Adhesion and Adhesives, vol. 30, no. 4, pp. 245-254, 2010/06/01/ 2010.
[29]	C. Creton, "Pressure-sensitive adhesives: an introductory course," MRS bulletin, vol. 28, no. 6, pp. 434-439, 2003.
[30]	S. Sun, M. Li, and A. Liu, "A review on mechanical properties of pressure sensitive adhesives," International Journal of Adhesion and Adhesives, vol. 41, pp. 98-106, 2013/03/01/ 2013.
[31]	O. Dubois, J.-B. Le Cam, and A. Beakou, "Experimental analysis of prepreg tack," Experimental Mechanics, vol. 50, no. 5, pp. 599-606, 2010.
[32]	J. SEFERIS and J. MEISSONNIER, "Development of a tack and drape test for prepregs based on viscoelastic principles," SAMPE quarterly, vol. 20, pp. 55-64, 1989.
[33]	K. J. Ahn, L. Peterson, J. C. Seferis, D. Nowacki, and H. G. Zachmann, "Prepreg aging in relation to tack," Journal of Applied Polymer Science, vol. 45, no. 3, pp. 399-406, 1992.
[34]	A. Gillanders, S. Kerr, and T. Martin, "Determination of prepreg tack," International Journal of Adhesion and Adhesives, vol. 1, no. 3, pp. 125-134, 1981.
[35]	C. Wohl et al., "Tack Measurements of Prepreg Tape at Variable Temperature and Humidity," 2017.
[36]	R. Banks, A. Mouritz, S. John, F. Coman, and R. Paton, "Development of a new structural prepreg: characterisation of handling, drape and tack properties," Composite structures, vol. 66, no. 1, pp. 169-174, 2004.
[37]	S. Rao, R. Umer, J. Thomas, and W. J. Cantwell, "Investigation of peel resistance during the fibre placement process," Journal of Reinforced Plastics and Composites, vol. 35, no. 4, pp. 275-286, 2016.
[38]	R. Crossley, P. Schubel, and N. Warrior, "The experimental determination of prepreg tack and dynamic stiffness," Composites Part A: Applied Science and Manufacturing, vol. 43, no. 3, pp. 423-434, 2012.
[39]	R. J. Crossley, P. J. Schubel, and D. S. A. De Focatiis, "Time–temperature equivalence in the tack and dynamic stiffness of polymer prepreg and its application to automated composites manufacturing," Composites Part A: Applied Science and Manufacturing, vol. 52, pp. 126-133, 9// 2013.
[40]	M. L. Williams, R. F. Landel, and J. D. Ferry, "The temperature dependence of relaxation mechanisms in amorphous polymers and other glass-forming liquids," Journal of the American Chemical society, vol. 77, no. 14, pp. 3701-3707, 1955.
[41]	G. G. Lozano, A. Tiwari, C. Turner, and S. Astwood, "A review on design for manufacture of variable stiffness composite laminates," Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, vol. 230, no. 6, pp. 981-992, 2016.
[42]	B. F. Tatting, "Analysis and design of variable stiffness composite cylinders," Virginia Tech, 1998.
[43]	B. F. Tatting and Z. Gurdal, "Automated finite element analysis of elastically-tailored plates," 2003.
[44]	Z. Gurdal, B. Tatting, and K. Wu, "Tow-placement technology and fabrication issues for laminated composite structures," in 46th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, 2005, p. 2017.
[45]	O. Falcó, J. Mayugo, C. Lopes, N. Gascons, and J. Costa, "Variable-stiffness composite panels: Defect tolerance under in-plane tensile loading," Composites Part A: Applied Science and Manufacturing, vol. 63, pp. 21-31, 2014.
[46]	X. Li, S. R. Hallett, and M. R. Wisnom, "Modelling the effect of gaps and overlaps in automated fibre placement (AFP)-manufactured laminates," Science and Engineering of Composite Materials, vol. 22, no. 2, pp. 115-129, 2015.
[47]	O. Falcó, C. Lopes, F. Naya, F. Sket, P. Maimí, and J. Mayugo, "Modelling and simulation of tow-drop effects arising from the manufacturing of steered-fibre composites," Composites Part A: Applied Science and Manufacturing, vol. 93, pp. 59-71, 2017.
[48]	W. Francis, M. Lake, and J. S. Mayes, "A review of classical fiber microbuckling analytical solutions for use with elastic memory composites," in 47th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference 14th AIAA/ASME/AHS Adaptive Structures Conference 7th, 2006, p. 1764.
[49]	W. H. Francis IV, "Mechanics of post-microbuckled compliant-matrix composites," Citeseer, 2008.
[50]	F. Lopez Jimenez, "Mechanics of thin carbon fiber composites with a silicone matrix," California Institute of Technology, 2011.
[51]	P. Hörmann, Thermoset Automated Fibre Placement-on Steering Effects and Their Prediction. Verlag Dr. Hut, 2016.
[52]	B. W. Rosen, "Fiber composite materials," American Society for Metals, Metals Park, Ohio, vol. 37, 1965.
[53]	S. Nagendra, S. Kodiyalam, J. E. Davis, and V. Parthasarathy, "Optimization of tow fiber paths for composite design," in Proceedings of the AIAA/ASME/ASCE/AHS/ASC 36th Structures, Structural Dynamics and Materials Conference, New Orleans, LA, 1995, pp. 1031-41.
[54]	J. Chen, T. Chen-Keat, M. Hojjati, A. Vallee, M.-A. Octeau, and A. Yousefpour, "Impact of layup rate on the quality of fiber steering/cut-restart in automated fiber placement processes," Science and Engineering of Composite Materials, vol. 22, no. 2, pp. 165-173, 2015.
[55]	A. W. Blom, "Structural performance of fiber-placed, variable-stiffness composite conical and cylindrical shells," 2010.
[56]	M. Wiehn and R. Hale, "Low cost robotic fabrication methods for tow placement," in 47 th International SAMPE Symposium and Exhibition 2002, 2002, pp. 1842-1852.
[57]	R. Smith, Z. Qureshi, R. Scaife, and H. El-Dessouky, "Limitations of processing carbon fibre reinforced plastic/polymer material using automated fibre placement technology," Journal of Reinforced Plastics and Composites, vol. 35, no. 21, pp. 1527-1542, 2016.
[58]	C. Zhao, J. Xiao, W. Huang, X. Huang, and S. Gu, "Layup quality evaluation of fiber trajectory based on prepreg tow deformability for automated fiber placement," Journal of Reinforced Plastics and Composites, vol. 35, no. 21, pp. 1576-1585, 2016.
[59]	A. Beakou, M. Cano, J. B. Le Cam, and V. Verney, "Modelling slit tape buckling during automated prepreg manufacturing: A local approach," Composite Structures, vol. 93, no. 10, pp. 2628-2635, 2011/09/01/ 2011.
[60]	M. Y. Matveev, P. J. Schubel, A. C. Long, and I. A. Jones, "Understanding the buckling behaviour of steered tows in Automated Dry Fibre Placement (ADFP)," Composites Part A: Applied Science and Manufacturing, vol. 90, no. Supplement C, pp. 451-456, 2016/11/01/ 2016.
[61]	M. Belhaj and M. Hojjati, "Wrinkle formation during steering in automated fiber placement: Modeling and experimental verification," Journal of Reinforced Plastics and Composites, p. 0731684417752872, 2018.
[62]	B. C. Kim, K. Potter, and P. M. Weaver, "Continuous tow shearing for manufacturing variable angle tow composites," Composites Part A: Applied Science and Manufacturing, vol. 43, no. 8, pp. 1347-1356, 2012.
[63]	Cytec Engineered Materials, "CYCOM 977-2, Product data sheet," 2012.
[64]	N. Bakhshi and M. Hojjati, "An experimental and Simulative Study on the Defects Appeared during Tow Steering in Automated Fiber Placement," Composites Part A: Applied Science and Manufacturing, 2018.
[65]	N. Bakhshi and M. Hojjati, "Time-dependent wrinkle formation during tow steering in automated fiber placement," Submitted to Composites Part B: Engineering, 2018.
[66]	R. Christensen, Theory of viscoelasticity: an introduction. Elsevier, 2012.
[67]	A. D. Kerr, "Elastic and Viscoelastic Foundation Models," Journal of Applied Mechanics, vol. 31, no. 3, pp. 491-498, 1964.
[68]	R. A. Schapery, "A method of viscoelastic stress analysis using elastic solutions," Journal of the Franklin Institute, vol. 279, no. 4, pp. 268-289, 1965.
[69]	D. W. Wilson and J. R. Vinson, "Viscoelastic analysis of laminated plate buckling," AIAA journal, vol. 22, no. 7, pp. 982-988, 1984.
[70]	P. Weaver and J. Herencia, "Buckling of a flexurally anisotropic plate with one edge free," in 48th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, 2007, p. 2413.
[71]	R. A. Sauer, "A survey of computational models for adhesion," The Journal of Adhesion, vol. 92, no. 2, pp. 81-120, 2016.
[72]	Wikipedia. Available: https://en.wikipedia.org/wiki/Fracture_mechanics
[73]	ABAQUS, "ABAQUS 6.14 Documentation," Dassault Systemes, Providence, RI, USA, 2014.
[74]	K. Potter, "Bias extension measurements on cross-plied unidirectional prepreg," Composites Part A: Applied Science and Manufacturing, vol. 33, no. 1, pp. 63-73, 2002.
[75]	H. Alshahrani, R. Mohan, and M. Hojjati, "Experimental investigation of in-plane shear deformation of out-of-autoclave prepreg," International Journal of Composite Materials, vol. 5, no. 4, pp. 81-87, 2015.
[76]	P. L. Mischler, M. C. Tingley, and K. Hoffmann, "Compaction roller for a fiber placement machine," ed: Google Patents, 2010.
[77]	F. Hélénon, D. Ivanov, and K. Potter, "Modelling slit tape deposition during automated fibre placement," in Proceedings of the 19th international conference on composite materials, 2013.
[78]	H. Qi, K. Joyce, and M. Boyce, "Durometer hardness and the stress-strain behavior of elastomeric materials," Rubber chemistry and technology, vol. 76, no. 2, pp. 419-435, 2003.
[79]	D. H. A. Lukaszewicz and K. Potter, "Through-thickness compression response of uncured prepreg during manufacture by automated layup," Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, vol. 226, no. 2, pp. 193-202, 2012.
[80]	C. Stover, "Laplace-Carson Transform," From MathWorld--A Wolfram Web Resource.