P.L. Fauchais, J.V.R. Heberlein, M. Boulos Thermal Spray Fundamentals from Powder to Part Springer, New York (2014)

J. Akedo Aerosol deposition of ceramic thick films at room temperature: densification mechanism of ceramic layers J. Am. Ceram. Soc., 89 (2006), pp. 1834-1839

J. Akedo Room temperature impact consolidation (RTIC) of fine ceramic powder by aerosol deposition method and applications to microdevices J. Therm. Spray Technol., 17 (2008), pp. 181-198

D. Hanft, J. Exner, M. Schubert, T. Stocker, P. Fuierer, R. Moos An overview of the aerosol deposition method: process fundamentals and new trends in materials applications J. Ceram. Sci. Technol., 6 (2015), pp. 147-182

J. Akedo Aerosol deposition method for room-temperature ceramic coating and its applications Shigeyuki Somiya (Ed.), Handbook of Advanced Ceramics: Materials, Applications, Processing, and Properties (2nd ed.), Elsevier (2013), pp. 847-860

K. Naoe, M. Nishiki, A. Yumoto Relationship between impact velocity of Al2O3 particles and deposition efficiency in aerosol deposition method J. Therm. Spray Technol., 22 (2013), pp. 1267-1274

S. Crist, D.R. Glass, P.M. Sherman Study of the highly underexpanded sonic jet AIAA J., 4 (1966), pp. 68-71

J. Akedo, M. Lebedev Influence of carrier gas conditions on electrical and optical properties of Pb(Zr,Ti)O3thin films prepared by aerosol deposition method Jpn. J. Appl. Phys., 40 (2001), pp. 5528-5532

M. Lebedev, J. Akedo, K. Mori, T. Eiju Simple self-selective method of velocity measurement for particles in impact-based deposition
J. Vac. Sci. Technol. A, 18 (2000), pp. 563-566

J. Kwon, H. Park, I. Lee, C. Lee Effect of gas flow rate on deposition behavior of Fe-based amorphous alloys in vacuum kinetic spray process Surf. Coat. Technol., 259 (2014), pp. 585-593

H. Katanoda, K. Matsuo Gasdynamic simulation of aerosol deposition method Mater. Trans., 47 (2006), pp. 1620-1625

C.B. Henderson Drag coefficients of spheres in continuum and rarefied flows AIAA J., 14 (1976), pp. 707-708

J.J. Park, M.W. Lee, S.S. Yoon, H.Y. Kim, S.C. James, S.D. Heister, S. Chandra, W.H. Yoon, D.S. Park, J. Ryu Supersonic nozzle flow simulations for particle coating applications: Effects of shockwaves, nozzle geometry, ambient pressure, and substrate location upon flow characteristics J. Therm. Spray Technol., 20 (2011), pp. 514-522

M.W. Lee, J.J. Park, D.Y. Kim, S.S. Yoon, H.Y. Kim, D.H. Kim, S.C. James, S. Chandra, T.Coyle, J. Ryu, W.H. Yoon, D.S. Park Optimization of supersonic nozzle flow for titanium dioxide thin-film coating by aerosol deposition J. Aerosol Sci., 42 (2011), pp. 771-780

H. Park, H. Kwon, C. Lee Inflight particle behavior in the vacuum kinetic spray process J. Therm. Spray Technol., 26 (2017), pp. 1616-1631

ANSYS Inc ANSYS FLUENT Theory Guide USA (2012)

D.M. Chun, J.O. Choi, C.S. Lee, S.H. Ahn Effect of stand-off distance for cold gas spraying of fine ceramic particles (<5 μm) under low vacuum and room temperature using nano-particle deposition system (NPDS) Surf. Coat. Technol., 206 (2012), pp. 2125-2132

ANSYS Inc ANSYS CFX-Solver Theory Guide USA (2006)

L. Schiller, Z. Naumann A drag coefficient correlation Z. Ver. Deutsch. Ing., 77 (1935), pp. 318-320

S.D. Johnson, D. Schwer, D.S. Park, Y.S. Park, E.P. Gorzkowski Deposition efficiency of barium hexaferrite by aerosol deposition Surf. Coat. Technol., 332 (2017), pp. 542-549

J.F. O'Hanlon A User's Guide to Vacuum Technology (3rd ed.), Wiley, New York (2003)

M. Jadidi, S. Moghtadernejad, A. Dolatabadi A comprehensive review on fluid dynamics and transport of suspension/liquid droplets and particles in high-velocity oxygen-fuel (HVOF) thermal spray Coatings, 5 (2015), pp. 576-645 

M. Jadidi, S. Moghtadernejad, A. Dolatabadi Numerical modeling of suspension HVOF spray J. Therm. Spray Technol., 25 (2016), pp. 451-464

M. Jadidi, A.Z. Yeganeh, A. Dolatabadi Numerical study of suspension HVOF spray and particle behavior near flat and cylindrical substrates J. Therm. Spray Technol., 27 (2018), pp. 59-72

C. Crowe, J.D. Schwarzkopf, M. Sommerfeld, Y. Tsuji Multiphase Flow With Droplets and Particles (2nd ed.), CRC Press, Boca Raton, FL (2011)

E. Loth Compressibility and rarefaction effects on drag of a spherical particle AIAA J., 46 (2008), pp. 2219-2228

L. Talbot, R.K. Cheng, R.W. Schefer, D.R. Willis Thermophoresis of particles in a heated boundary layer J. Fluid Mech., 101 (1980), pp. 737-758

Y.A. Cengel Heat and Mass Transfer: A Practical Approach (3rd ed.), McGraw-Hill, New York (2006)

Y.A. Cengel, M.A. Boles Thermodynamics: an Engineering Approach (eighth ed.), McGraw-Hill, New York (2015)

J.M. Gorman, E.M. Sparrow, J.P. Abraham Slot jet impingement heat transfer in the presence of jet-axis switching Int. J. Heat Mass Transf., 78 (2014), pp. 50-57

M. Jadidi, M. Mousavi, S. Moghtadernejad, A. Dolatabadi A three-dimensional analysis of the suspension plasma spray impinging on a flat substrate J. Therm. Spray Technol., 24 (2015), pp. 11-23

H. Katanoda, M. Fukuhara, N. Iino Numerical simulation on impact velocity of ceramic particles propelled by supersonic nitrogen gas flow in vacuum chamber Mater. Trans., 48 (2007), pp. 1463-1468

G.G. Joseph, R. Zenit, M.L. Hunt, A.M. Rosenwinkel Particle-wall collisions in a viscous fluid J. Fluid Mech., 433 (2001), pp. 329-346

P. Gondret, M. Lance, L. Petit Bouncing motion of spherical particles in fluids Phys. Fluids, 14 (2002), p. 643

M.A. Gallis, D.J. Rader, J.R. Torczynski A generalized approximation for the thermophoretic force on a free-molecular particle Aerosol Sci. Technol., 38 (2004), pp. 692-706