S. Adewusi, S. Rakheja, P. Marcotte, J. Boutin Vibration transmissibility characteristics of the human hand-arm system under different postures, hand forces and excitation levels Journal of Sound and Vibration, 329 (14) (2010), pp. 2953-2971

Y. Aldien, D. Welcome, S. Rakheja, R. Dong, P.É. Boileau Contact pressure distribution at hand-handle interface: Role of hand forces and handle size International Journal of Industrial Ergonomics, 35 (3) (2005), pp. 267-286

Aldien, Y. S. (2005). A Study of Hand-Handle Interactions and Hand-Arm Biodynamic Response to Vibration. Ph.D. Thesis, Concordia University, Montreal.
 
Y. Aldien, P. Marcotte, S. Rakheja, P.É. Boileau Mechanical impedance and absorbed power of hand-arm under xh-axis vibration and role of hand forces and posture Industrial Health, 43 (3) (2005), pp. 495-508

K.N. Bachus, A.L. DeMarco, K.T. Judd, D.S. Horwitz, D.S. Brodke Measuring contact area, force, and pressure for bioengineering applications: Using Fuji film and TekScan systems Medical Engineering & Physics, 28 (5) (2006), pp. 483-488

K.E. Beschorner, G.P. Slota, E.M. Pliner, E. Spaho, N.J. Seo Effects of Gloves and Pulling Task on Achievable Downward Pull Forces on a Rung
Human factors, 60 (2) (2018), pp. 191-200

J.M. Brimacombe, D.R. Wilson, A.J. Hodgson, K.C. Ho, C. Anglin Effect of calibration method on Tekscan sensor accuracy Journal of Biomechanical Engineering, 131 (3) (2009), Article 034503

CEN, TR 16391, Mechanical vibration and shock- hand transmitted vibration — influence of coupling forces at the hand-machine interface on exposure evaluation 2012 European National Standards

C. Chang, Y. Shih The effects of glove thickness and work load on female hand performance and fatigue during an infrequent high-intensity gripping task Applied Ergonomics, 38 (3) (2007), pp. 317-324

M. Ferguson-Pell, S. Hagisawa, D. Bain Evaluation of a sensor for low interface pressure applications Medical Engineering & Physics, 22 (9) (2000), pp. 657-663

T. Fukubayashi, H. Kurosawa The contact area and pressure distribution pattern of the knee: A study of normal and osteoarthrotic knee joints
Acta Orthopaedica Scandinavica, 51 (1–6) (1980), pp. 871-879

R. Gurram, S. Rakheja, G. Gouw A study of hand grip pressure distribution and EMG of finger flexor muscles under dynamic loads
Ergonomics, 38 (4) (1995), pp. 684-699

K. Hamouda, S. Rakheja, K. Dewangan, P. Marcotte Fingers' vibration transmission and grip strength preservation performance of vibration reducing gloves Applied Ergonomics, 66 (2018), pp. 121-138

I. Horsley, L. Herrington, R. Hoyle, E. Prescott, N. Bellamy Do changes in hand grip strength correlate with shoulder rotator cuff function?
Shoulder & Elbow, 8 (2) (2016), pp. 124-129

E.J. Huesler, M.A. Maier, M. Hepp-Reymond EMG activation patterns during force production in precision grip. III. Synchronisation of single motor units Experimental Brain Research, 134 (4) (2000), pp. 441-455

C.B. Irwin, J.D. Towles, R.G. Radwin Multiaxis grip characteristics for varying handle diameters and effort Human Factors, 57 (2) (2015), pp. 227-237

ISO 10819, Mechanical vibration and shock-hand-arm vibration–measurement and evaluation of the vibration transmissibility of gloves at the palm of the hand 2013 International Organization of Standards Geneva, Switzerland

ISO 15230, Mechanical vibration and shock - coupling forces at the man-machine interface for hand-transmitted vibration 2007 International Organization for Standardization Geneva

ISO 5349-1 (2001): Mechanical vibration—measurement and evaluation of human exposure to hand-transmitted vibration—part 1: General requirements. Geneva, Switzerland: International Organization for Standardization

ISO 5349-2 (2001): Mechanical vibration—measurement and evaluation of human exposure to hand-transmitted vibration—part 2: Practical guidance for measurement at the workplace. Geneva, Switzerland: International Organization for Standardization

M. Kalra, S. Rakheja, P. Marcotte, K. Dewangan, S. Adewusi Measurement of coupling forces at the power tool handle-hand interface International Journal of Industrial Ergonomics, 50 (2015), pp. 105-120

E.R. Komi, J.R. Roberts, S. Rothberg Evaluation of thin, flexible sensors for time-resolved grip force measurement Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 221 (12) (2007), pp. 1687-1699

P. Lemerle, A. Klinger, A. Cristalli, M. Geuder Application of pressure mapping techniques to measure push and gripping forces with precision Ergonomics, 51 (2) (2008), pp. 168-191

P. Marcotte, Y. Aldien, P.É. Boileau, S. Rakheja, J. Boutin Effect of handle size and hand-handle contact force on the biodynamic response of the hand-arm system under zh-axis vibration Journal of Sound and Vibration, 283 (3) (2005), pp. 1071-1091

A. Mastalerz, E. Nowak, I. Palczewska, E. Kalka Maximal grip force during holding a cylindrical handle with different diameters Human Movement, 10 (1) (2009), pp. 26-30

P. Misiewicz, K. Blackburn, T. Richards, J. Brighton, R. Godwin The evaluation and calibration of pressure mapping system for the measurement of the pressure distribution of agricultural tyres Biosystems Engineering, 130 (2015), pp. 81-91

S. Odenwald, D. Krumm Effects of elastic compression sleeves on the biodynamic response to external vibration of the hand-arm system
Procedia Engineering, 72 (2014), pp. 114-119

EN 420 European Committee for Standardization, 2010. Protective gloves general requirements and test methods. European Committee for Standardization

J. Rossi, E. Berton, L. Grélot, C. Barla, L. Vigouroux Characterisation of forces exerted by the entire hand during the power grip: Effect of the handle diameter Ergonomics, 55 (6) (2012), pp. 682-692

C. Savva, C. Karagiannis, A. Rushton Test-retest reliability of grip strength measurement in full elbow extension to evaluate maximum grip strength Journal of Hand Surgery (European Volume), 38 (2) (2013), pp. 183-186

L. Scalise, N. Paone Pressure sensor matrix for indirect measurement of grip and push forces exerted on a handle Measurement, 73 (2015), pp. 419-428

N.J. Seo, T.J. Armstrong Investigation of grip force, normal force, contact area, hand size, and handle size for cylindrical handles
Human Factors, 50 (5) (2008), pp. 734-744

N.J. Seo, T.J. Armstrong, J.A. Ashton-Miller, D.B. Chaffin The effect of torque direction and cylindrical handle diameter on the coupling between the hand and a cylindrical handle Journal of Biomechanics, 40 (14) (2007), pp. 3236-3243 

A.J. Shaw, B.A. Davis, M.J. Collins, L.G. Carney A technique to measure eyelid pressure using piezoresistive sensors IEEE Transactions on Biomedical Engineering, 56 (10) (2009), pp. 2512-2517

Tekscan I-scan & high-speed I-scan user manual TekScan, USA (2012)

A. Thompson, R. House Hand-arm vibration syndrome with concomitant arterial thrombosis in the hands Occupational Medicine, 56 (5) (2006), pp. 317-321

L. Vigouroux, F. Quaine, A. Labarre-Vila, D. Amarantini, F. Moutet Using EMG data to constrain optimization procedure improves finger tendon tension estimations during static fingertip force production
Journal of Biomechanics, 40 (13) (2007), pp. 2846-2856

D. Welcome, S. Rakheja, R. Dong, J. Wu, A. Schopper An investigation on the relationship between grip, push and contact forces applied to a tool handle International Journal of Industrial Ergonomics, 34 (6) (2004), pp. 507-518

K. Willms, R. Wells, H. Carnahan Glove attributes and their contribution to force decrement and increased effort in power grip Human Factors, 51 (6) (2009), pp. 797-812

D. Wilson, M.V. Apreleva, M.J. Eichler, F.R. Harrold Accuracy and repeatability of a pressure measurement system in the patellofemoral joint Journal of Biomechanics, 36 (12) (2003), pp. 1909-1915

B. Wimer, T.W. McDowell, X.S. Xu, D.E. Welcome, C. Warren, R.G. Dong Effects of gloves on the total grip strength applied to cylindrical handles International Journal of Industrial Ergonomics, 40 (5) (2010), pp. 574-583

D. Wirz, R. Becker, S. Feng Li, N. Friedrich, W. Müller Validation of the Tekscan system for static and dynamic pressure measurements in the human femorotibial joint Biomedical Engineering, 47 (7–8) (2002), pp. 195-201

X. Wu, S. Rakheja, P.É. Boileau Distribution of human-seat interface pressure on a soft automotive seat under vertical vibration
International Journal of Industrial Ergonomics, 24 (5) (1999), pp. 545-557

X.S. Xu, D.E. Welcome, C.M. Warren, T.W. McDowell, R.G. Dong Development of a finger adapter method for testing and evaluating vibration-reducing gloves and materials Measurement, 137 (2019), pp. 362-374

J.G. Young, M.E. Sackllah, T.J. Armstrong Force distribution at the hand/handle interface for grip and pull tasks Paper presented at the Proceedings of the Human Factors and Ergonomics Society Annual Meeting, 54 (15) (2010), pp. 1159-1163

J.G. Young, C.B. Woolley, J.A. Ashton-Miller, T.J. Armstrong The effect of handhold orientation, size, and wearing gloves on hand-handhold breakaway strength Human Factors, 54 (3) (2012), pp. 316-333

J.G. Young, C. Woolley, T.J. Armstrong, J.A. Ashton-Miller Hand-handhold coupling: Effect of handle shape, orientation, and friction on breakaway strength Human Factors, 51 (5) (2009), pp. 705-717

A. Yu, K.L. Yick, S.P. Ng, J. Yip The effect of pressure glove tightness on forearm muscle activity and psychophysical responses Human factors, 57 (6) (2015), pp. 988-1001

Y. Zheng, Yu. Peng, G. Wang, X. Liu, X. Dong, J. Wang Development and evaluation of a sensor glove for hand function assessment and preliminary attempts at assessing hand coordination Measurement, 93 (2016), pp. 1-12