1. Z. Pi, J. Choi, R. W. Heath, "Millimeter-wave gigabit broadband evolution toward 5G: Fixed access and backhaul", IEEE Commun. Mag., vol. 54, pp. 138-144, Apr. 2016.
 
2. Y. Miura, J. Hirokawa, M. Ando, Y. Shibuya, G. Yoshida, "Double-layer full-corporate-feed hollow-waveguide slot array antenna in the 60-GHz band", IEEE Trans. Antennas Propag., vol. 59, no. 8, pp. 2844-2851, Aug. 2011.
 
3. P.-S. Kildal, A. U. Zaman, E. Rajo-Iglesias, E. Alfonso, A. V. Nogueira, "Design and experimental verification of ridge gap waveguide in bed of nails for parallel-plate mode suppression", IET Microw. Antennas Propag., vol. 5, no. 3, pp. 262-270, Mar. 2011.
 
4. E. Rajo-Iglesias, P.-S. Kildal, "Numerical studies of bandwidth of parallel-plate cut-off realised by a bed of nails corrugations and mushroom-type electromagnetic bandgap for use in gap waveguides", IET Microw. Antennas Propag., vol. 5, no. 3, pp. 282-289, Mar. 2011.
 
5. I. J. Bahl, D. K. Trivedi, "A designer’s guide to microstrip line", Microwaves, vol. 16, pp. 174-182, May 1977.
 
6. F. E. Gardiol, "Radiation from microstrip circuits: An introduction", Int. J. Microw. Millim.-Wave Comput.-Aided Eng., vol. 1, no. 2, pp. 225-235, 1991.
 
7. P.-S. Kildal, "Three metamaterial-based gap waveguides between parallel metal plates for mm/submm waves", Proc. 3rd Eur. Conf. Antennas Propag., pp. 28-32, Mar. 2009.
 
8. J. Hirokawa, M. Ando, "Single-layer feed waveguide consisting of posts for plane TEM wave excitation in parallel plates", IEEE Trans. Antennas Propag., vol. 46, no. 5, pp. 625-630, May 1998.
 
9. D. Deslandes, K. Wu, "Accurate modeling wave mechanisms and design considerations of a substrate integrated waveguide", IEEE Trans. Microw. Theory Techn., vol. 54, no. 6, pp. 2516-2526, Jun. 2006.
 
10. E. Pucci, E. Rajo-Iglesias, P.-S. Kildal, "New microstrip gap waveguide on mushroom-type EBG for packaging of microwave components", IEEE Microw. Wireless Compon. Lett., vol. 22, no. 3, pp. 129-131, Mar. 2012.
 
11. H. Raza, J. Yang, P.-S. Kildal, E. Alfonso, "Resemblance between gap waveguides and hollow waveguides", IET Microw. Antennas Propag., vol. 7, no. 15, pp. 1221-1227, Dec. 2013.
 
12. P.-S. Kildal, "Waveguides and transmission lines in gaps between parallel conducting surfaces", Jun. 2009.
 
13. M. G. Silveirinha, C. A. Fernandes, J. R. Costa, "Electromagnetic characterization of textured surfaces formed by metallic pins", IEEE Trans. Antennas Propag., vol. 56, no. 2, pp. 405-415, Feb. 2008.
 
14. D. Sievenpiper, L. Zhang, R. F. J. Broas, N. G. Alexopolous, E. Yablonovitch, "High-impedance electromagnetic surfaces with a forbidden frequency band", IEEE Trans. Microw. Theory Techn., vol. 47, no. 11, pp. 2059-2074, Nov. 1999.
 
15. S. A. Razavi, P.-S. Kildal, L. Xiang, E. A. Alós, H. Chen, " 2times2 -slot element for 60-GHz planar array antenna realized on two doubled-sided PCBs using SIW cavity and EBG-type soft surface fed by microstrip-ridge gap waveguide ", IEEE Trans. Antennas Propag., vol. 62, no. 9, pp. 4564-4573, Sep. 2014.

16. E. Rajo-Iglesias, A. U. Zaman, P.-S. Kildal, "Parallel plate cavity mode suppression in microstrip circuit packages using a lid of nails", IEEE Microw. Wireless Compon. Lett., vol. 20, no. 1, pp. 31-33, Jan. 2010.
 
17. A. Kishk, A. U. Zaman, P.-S. Kildal, "Numerical prepackaging with PMC lid—Efficient and simple design procedure for microstrip circuits including the packaging", ACES J., vol. 27, no. 5, pp. 389-398, May 2012.
 
18. J. Zhang, X. Zhang, D. Shen, A. A. Kishk, "Packaged microstrip line: A new quasi-TEM line for microwave and millimeter-wave applications", IEEE Trans. Microw. Theory Techn., vol. 65, no. 3, pp. 707-719, Mar. 2017.
 
19. J. Zhang, X. Zhang, D. Shen, A. A. Kishk, "A novel self-packaged microstrip line", Proc. 32nd URSI Gen. Assem. Sci. Symp., pp. 1-2, Aug. 2017.
 
20. J. Zhang, X. Zhang, D. Shen, A. A. Kishk, "Design of packaged microstrip line", Proc. IEEE Int. Conf. Microw. Millim. Wave Technol. (ICMMT), pp. 82-84, Jun. 2016.
 
21. M. S. Sorkherizi, A. A. Kishk, "Self-packaged low-loss planar bandpass filters for millimeter-wave application based on printed gap waveguide technology", IEEE Trans. Compon. Packag. Manuf. Technol., vol. 7, no. 9, pp. 1419-1431, Sep. 2017.
 
22. M. S. Sorkherizi, A. A. Kishk, "Fully printed gap waveguide with facilitated design properties", IEEE Microw. Wireless Compon. Lett., vol. 26, no. 9, pp. 657-659, Sep. 2016.
 
23. M. S. Sorkherizi, A. Dadgarpour, A. A. Kishk, "Planar high-efficiency antenna array using new printed ridge gap waveguide technology", IEEE Trans. Antennas Propag., vol. 65, no. 7, pp. 3772-3776, Jul. 2017.
 
24. A. Polemi, S. Maci, "Closed form expressions for the modal dispersion equations and for the characteristic impedance of a metamaterial-based gap waveguide", IET Microw. Antennas Propag., vol. 4, no. 8, pp. 1073-1080, Aug. 2010.
 
25. M. M. M. Ali, S. I. Shams, A. R. Sebak, "Printed ridge gap waveguide 3-dB coupler: Analysis and design procedure", IEEE Access, vol. 6, pp. 8501-8509, 2018.
 
26. E. Hammerstad, O. Jensen, "Accurate models for microstrip computer-aided design", IEEE MTT-S Int. Microw. Symp. Dig., pp. 407-409, May 1980.
 
27. M. Kirschning, R. H. Jansen, "Accurate wide-range design equations for the frequency-dependent characteristic of parallel coupled microstrip lines", IEEE Trans. Microw. Theory Techn., vol. MTT-32, no. 1, pp. 83-90, Jan. 1984.
 
28. H. A. Wheeler, "Transmission-line properties of a strip on a dielectric sheet on a plane", IEEE Trans. Microw. Theory Techn., vol. MTT-25, no. 8, pp. 631-647, Aug. 1977.
 
29. M. A. R. Gunston, J. R. Weale, "Variation of microstrip impedance with strip thickness", Electron. Lett., vol. 5, no. 26, pp. 697-698, Dec. 1969.
 
30. M. A. R. Gunston, J. R. Weale, "Transmission characteristics of microstrip", Marconi Rev., vol. 32, pp. 226-243, Oct./Dec. 1969.
 
31. I. J. Bahl, R. Garg, "Simple and accurate formulas for a microstrip with finite strip thickness", Proc. IEEE, vol. 65, no. 11, pp. 1611-1612, Nov. 1977.
 
32. N. Bayat-Makou, A. A. Kishk, "Millimeter-wave substrate integrated dual level gap waveguide horn antenna", IEEE Trans. Antennas Propag., vol. 65, no. 12, pp. 6847-6855, Dec. 2017.
 
33. R. E. Collin, Foundations for Microwave Engineering, New York, NY, USA:McGraw-Hill, 1992.
 
34. A. A. Brazález, E. Rajo-Iglesias, J. L. Vázquez-Roy, A. Vosoogh, P.-S. Kildal, "Design and validation of microstrip gap waveguides and their transitions to rectangular waveguide for millimeter-wave applications", IEEE Trans. Microw. Theory Techn., vol. 63, no. 12, pp. 4035-4050, Dec. 2015.
 
35. E. Pucci, E. Rajo-Iglesias, J. L. Vázquez-Roy, P.-S. Kildal, "Planar dual-mode horn array with corporate-feed network in inverted microstrip gap waveguide", IEEE Trans. Antennas Propag., vol. 62, no. 7, pp. 3534-3542, Jul. 2014.
 
36. A. R. Djordjevic, R. M. Biljie, V. D. Likar-Smiljanic, T. K. Sarkar, "Wideband frequency-domain characterization of FR-4 and time-domain causality", IEEE Trans. Electromagn. Compat., vol. 43, no. 4, pp. 662-667, Nov. 2001.