Aaleti, S., Brueggen, B. L., Johnson, B., French, C. E., and Sritharan, S. (2013). Cyclic response of reinforced concrete walls with different anchorage details: experimental investigation. Journal of Structural Engineering, 139, 1181–1191. 
Abdel-Latif, A., Okail, H., Shedid, M., and Abdelrahman, A. (2015). Modelling of reinforced masonry structural walls under lateral loads. In 12th North American Masonry Conference. Denver, Colorado, United States of America.
Ahmadi, F., Hernandez, J., Sherman, J., Kapoi, C., Klingner, R. E., and McLean, D. I. (2014). Seismic performance of cantilever-reinforced concrete masonry shear walls. Journal of Structural Engineering, 140(9), 04014051.
Alemdar, B. N., and White, D. W. (2005). Displacement, flexibility, and mixed beam-column finite element formulation for distributed plasticity analysis. Journal of Structural Engineering, 131(12), 1811–1819.
AlHamaydeh, M., Aly, N., and Galal, K. (2017). Impact of seismicity on performance and cost of RC shear wall buildings in Dubai, United Arab Emirates. Journal of Performance of Constructed Facilities, 31(5), 1–14. 
Aly, N., Ashour, A., and Galal, K. (2017). Seismic performance and height limits of ductile reinforced masonry shear wall buildings with boundary elements. In 13th Canadian Masonry Symposium. Halifax, Nova Scotia, Canada.
Aly, N., and Galal, K. (2019a). Effect of ductile shear wall ratio and cross-section configuration on the seismic behavior of reinforced concrete masonry shear wall buildings. Journal of Structural Engineering (accepted-in press).
Aly, N., and Galal, K. (2019b). Influence of ductile shear wall ratio on the seismic performance of reinforced concrete masonry shear wall buildings. In 13th North American Masonry Conference (pp. 1462–1474). Salt Lake City, Utah, United States of America: The Masonry Society.
Aly, N., and Galal, K. (2019c). Seismic performance and height limits of ductile reinforced masonry shear wall buildings with boundary elements. Engineering Structures, 190, 171–188.
American Society for Testing and Materials (ASTM). (2012). Standard Test Methods for Cyclic (Reversed) Load Test for Shear Resistance of Vertical Elements of the Lateral Force Resisting Systems for Buildings, E2126-12. West Conshohocken, PA, United States of America.
American Society for Testing and Materials (ASTM). (2013). Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50-Mm] Cube Specimens), C109M-13. West Conshohocken, PA, United States of America.
American Society for Testing and Materials (ASTM). (2015). Standard Test Methods for Sampling and Testing Concrete Masonry Units and Related Units, C140-15. West Conshohocken, PA, United States of America.
American Society for Testing and Materials (ASTM). (2015). Standard Specification for Carbon-Steel Wire and Welded Wire Reinforcement, Plain and Deformed, for Concrete, A1064M-15. West Conshohocken, PA, United States of America.
American Society for Testing and Materials (ASTM). (2015). Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens, C39M-15. West Conshohocken, PA, United States of America.
American Society for Testing and Materials (ASTM). (2015). Standard Specification for Deformed and Plain Carbon-Steel Bars for Concrete Reinforcement, A615M-15. West Conshohocken, PA, United States of America.
American Society of Civil Engineers/Structural Engineering Institute (ASCE/SEI). (2008). Minimum design loads for buildings and other structures (ASCE7-08). Reston, Virginia, United States of America.
American Society of Civil Engineers/Structural Engineering Institute (ASCE/SEI). (2010). Minimum design loads for buildings and other structures (ASCE7-10). Reston, Virginia, United States of America.
American Society of Civil Engineers/Structural Engineering Institute (ASCE/SEI). (2016). Minimum design loads for buildings and other structures (ASCE7-16). Reston, Virginia, United States of America.
Ashour, A., El-Dakhakhni, W., and Shedid, M. (2016). Influence of floor diaphragm–wall coupling on the system-level seismic performance of an asymmetrical reinforced concrete block building. Journal of Structural Engineering, 142(10), 04016071. 
Assatourians, K., and Atkinson, G. (2010). Database of processed time series and response spectra data for Canada: an example application to study of 2005 MN 5.4 Riviere du Loup, Québec, earthquake. Seismological Research Letters, 81(6), 1013–1031. 
Atkinson, G. (2009). Earthquake time histories compatible with the 2005 national building code of Canada uniform hazard spectrum. Canadian Journal of Civil Engineering, 36(6), 991–1000. 
Baker, J. W. (2015). Efficient analytical fragility function fitting using dynamic structural analysis. Earthquake Spectra, 31(1), 579–599. 
Banting, B., and El-Dakhakhni, W. (2012). Force- and displacement-based seismic performance parameters for reinforced masonry structural walls with boundary elements. Journal of Structural Engineering, 138(12), 1477–1497. 
Banting, B., and El-Dakhakhni, W. (2014). Seismic performance quantification of reinforced masonry structural walls with boundary elements. Journal of Structural Engineering, 140(5), 1–15. 
Banting, B., and El-Dakhakhni, W. (2014). Normal strain-adjusted shear strength expression for fully grouted reinforced masonry structural walls. Journal of Structural Engineering, 140(3). 
Bedeir, H., Shedid, M., Okail, H., and Hamdy, O. (2017). A force-based macro-model for reinforced concrete masonry walls subjected to quasi-static lateral loading. In 13th Canadian Masonry Symposium. Halifax, Nova Scotia, Canada.
Bohl, A., and Adebar, P. (2011). Plastic hinge length in high-rise concrete shear walls. ACI Structural Journal, 108(2). 
Bolhassani, M., Hamid, A. A., Johnson, C., Moon, F. L., and Schultz, A. E. (2016). New design detail to enhance the seismic performance of ordinary reinforced partially grouted masonry structures. Journal of Structural Engineering, 142(12), 1–15.
Bruneau, M., and Yoshimura, K. (1996). Damage to masonry buildings caused by the 1995 Kobe earthquake. Canadian Journal of Civil Engineering, 23, 797–807.
Burak, B., and Comlekoglu, H. G. (2013). Effect of shear wall area to floor area ratio on the seismic behavior of reinforced concrete buildings. Journal of Structural Engineering, ASCE, 139(11), 1928–1937. 
Calabrese, A., Almeida, J. P., and Pinho, R. (2010). Numerical issues in distributed inelasticity modeling of RC frame elements for seismic analysis. Journal of Earthquake Engineering, 14(S1), 38–68. 
Carvalho, G., Bento, R., and Bhatt, C. (2013). Nonlinear static and dynamic analyses of reinforced concrete buildings - comparison of different modelling approaches. Earthquakes and Structures, 4(5), 451–470. 
Chang, G. A., and Mander, J. B. (1994). Seismic energy based fatigue damage analysis of bridge columns: Part I—Evaluation of seismic capacity. NCEER Technical Rep. No. NCEER-94-0006, State Univ. of New York, Buffalo, NY, 222.
Chopra, A. K. (2007). Dynamics of structures: Theory and applications to earthquake engineering (3rd Ed.). Upper Saddle River, NJ: Pearson Prentice Hall.
Coleman, J., and Spacone, E. (2001). Localization issues in force-based frame elements. Journal of Structural Engineering, 127(11), 1257–1265.
Correa, M. R. S. (2016). A 20-storey high masonry building in Brazil — design problems and adopted strategies. In 16th International Brick and Block Masonry Conference (pp. 623–628). Padova, Italy.
Canadian Standards Association (CSA). (2014). Mortar and Grout for Unit Masonry, A179-14. Toronto, Ontario, Canada.
Canadian Standards Association (CSA). (2014). CSA Standards on Concrete Masonry Units, A165-14. Mississauga, Ontario, Canada.
Canadian Standards Association (CSA). (2004). Design of Concrete Structures, A23.3-04. Mississauga, Ontario, Canada.
Canadian Standards Association (CSA). (2004). Design of Masonry Structures, S304.1-04. Mississauga, Ontario, Canada.
Canadian Standards Association (CSA). (2014). Design of Masonry Structures, S304-14. Mississauga, Ontario, Canada.
Computers and Structures Inc. (CSI), ETABS 2015, https://www.csiamerica.com/products/etabs. (2015). Berkeley, California, United States of America.
Dhanasekar, M., and Shrive, N. G. (2002). Strength and deformation of confined and unconfined grouted concrete masonry. ACI Structural Journal, 99(6), 819–826.
Drysdale, R. G., and Hamid, A. A. (1979). Behavior of concrete block masonry under axial compression. ACI Journal, 76(6), 707–721.
Drysdale, R. G., and Hamid, A. A. (2005). Masonry Structures Behaviour and Design (Canadian edition). Canada Masonry Design Centre, Mississauga, Ontario, Canada.
Drysdale, R. G., and Khattab, M. M. (1995). In-plane behavior of grouted concrete masonry under biaxial tension-compression. ACI Structural Journal, 92(6), 653–664. 
El-Sokkary, H., and Galal, K. (2018). Material quantities of reinforced masonry versus reinforced concrete shear walls. In Fifteenth International Conference on Structural and Geotechnical Engineering: Advances in construction materials-research and applications. Cairo, Egypt: Ain Shams University.
Ezzeldin, M., El-Dakhakhni, W., and Weibe, L. (2017). Experimental assessment of the system-level seismic performance of an asymmetrical reinforced concrete block – wall building with boundary elements. Journal of Structural Engineering, 143(8), 1–13. 
Ezzeldin, M., Wiebe, L., and El-Dakhakhni, W. (2016). Seismic collapse risk assessment of reinforced masonry walls with boundary elements using the FEMA P695 methodology. Journal of Structural Engineering, 142(11), 1–14. 
Federal Emergency Management Agency (FEMA). (2007). FEMA 461, Interim Testing Protocols for determining the seismic performance characteristics of structural and nonstructural components. Prepared for the Federal Emergency Management Agency, Prepared by the Applied Technology Council, Washington D.C., United States of America.
Federal Emergency Management Agency (FEMA). (2009). FEMA P695, Quantification of Building Seismic Performance Factors. Prepared for the Federal Emergency Management Agency, Prepared by the Applied Technology Council, Washington D.C., United States of America.
Federal Emergency Management Agency (FEMA). (2012). FEMA P58-1, Seismic Performance Assessment of Buildings - Methodology. Prepared for the Federal Emergency Management Agency, Prepared by the Applied Technology Council, Washington D.C., United States of America.
Filiatrault, A., Tremblay, R., Christopoulos, C., Folz, B., and Pettinga, D. (2013). Elements of earthquake engineering and structural dynamics (third edit). Québec, Canada: Presses internationales Polytechnique.
Filippou, F. C., Povpov, E. P., and Bertero, V. V. (1983). Effects of bond deterioration on hysteretic behavior of reinforced concrete joints. Earthquake Engineering Research Center. University of California, Berkeley. 
Fortes, E. S., Parsekian, G. A., and Fonseca, F. S. (2015). Relationship between the compressive strength of concrete masonry and the compressive strength of concrete masonry units. Journal of Materials in Civil Engineering, 27(9). 
Gogus, A., and Wallace, J. (2015). Seismic safety evaluation of reinforced concrete walls through FEMA P695 methodology. Journal of Structural Engineering, 141(10), 1–17. 
Hamid, A. A., and Chandrakeerthy, S. R. (1992). Compressive strength of partially grouted concrete masonry using small scale wall elements. The Masonry Society Journal, 11(1), 75–85
Hamzeh, L., Ashour, A., and Galal, K. (2018). Development of fragility curves for reinforced-masonry structural walls with boundary elements. Journal of Performance of Constructed Facilities, 32(4). 
Jiang, H., and Kurama, Y. (2010). Analytical modeling of medium-rise reinforced concrete shear walls. ACI Structural Journal, 107(4), 400–410. 
Kelln, R. D., and Feldman, L. R. (2015). Bar size factors for lap splices in block walls subjected to flexure. Canadian Journal of Civil Engineering, 42(8), 521–529. 
Khalaf, F. M. (1996). Factors influencing compressive strength of concrete masonry prisms. Magazine of Concrete Research, 48(175), 95–101.
Kikuchi, K., Yoshimura, K., Yoshida, K., Tanaka, A., Urasaki, H., Kijima, Y., and Mizumasa, N. (2004). Experimental study on seismic capacity of reinforced fully grouted concrete masonry walls. In 13th World Conference on Earthquake Engineering, (1880). Vancouver, B.C., Canada.
Kolozvari, K., Orakcal, K., and Wallace, J. W. (2015a). Modeling of cyclic shear-flexure interaction in reinforced concrete structural walls. I: theory. Journal of Structural Engineering, 141(5). 
Kolozvari, K., Tran, T. A., Orakcal, K., and Wallace, J. W. (2015b). Modeling of cyclic shear-flexure interaction in reinforced concrete structural walls. II : experimental validation. Journal of Structural Engineering, 141(5). 
Kunnath, S. K., and Brown, J. (2004). Low-cycle fatigue failure of reinforcing steel bars. ACI Materials Journal, 101(6), 457–466.
Légeron, F., Paultre, P., and Mazars, J. (2005). Damage mechanics modeling of nonlinear seismic behavior of concrete structures. Journal of Structural Engineering, 131(6), 946–955.
Mander, J. B., Priestley, M. J. N., and Park, R. (1988). Theoretical stress-strain model for confined concrete. Journal of Structural Engineering, 114(8), 1804–1826.
Martinez-Rueda, J. E., and Elnashai, A. S. (1997). Confined concrete model under cyclic load. Materials and Structures, 30(3), 139–147. 
McKenna, F., Fenves, G., and Scott, M. (2000). Open system for earthquake engineering simulation (OpenSees). University of California, Berkeley, California. United States of America.
Menegotto, M., and Pinto, P. E. (1973). Method of analysis for cyclically loaded RC plane frames including changes in geometry and non-elastic behavior of elements under combined normal force and bending. In proceedings of IABSE Symposium on Resistance and Ultimate Deformability of Structures Acted on by Well Defined Loads (pp. 15–22). International Association for Bridge and Structural Engineering, Zurich, Switzerland. 
Michaud, D., and Leger, P. (2014). Ground motions selection and scaling for nonlinear dynamic analysis of structures located in Eastern North America. Canadian Journal of Civil Engineering, 41(3), 232–244. 
Mjelde, J. Z., McLean, D. I., Thompson, J. J., and McGinley, W. M. (2009). Performance of lap splices in concrete masonry shear walls. The Masonry Society Journal, 27(1), 35–54.
Masonry Standard Joint Committee (MSJC-05). (2005). Building Code Requirements for Masonry Structures. TMS 402/ASCE 5/ACI 530. Reston, VA, United States of America.
Masonry Standard Joint Committee (MSJC-11). (2011). Building Code Requirements for Masonry Structures. TMS 402/ASCE 5/ACI 530. Reston, VA, United States of America.
Masonry Standard Joint Committee (MSJC-13). (2013). Building Code Requirements for Masonry Structures. TMS 402/ASCE 5/ACI 530. Reston, VA, United States of America.
Mwafy, A. (2011). Assessment of seismic design response factors of concrete wall buildings. Earthquake Engineering and Engineering Vibration, 10(01), 115–127.
National Building Code of Canada (NBCC). (2015). Institute for Research in Construction. Ottawa, Ontario, Canada: National Research Council of Canada.
Newmark, N. M., and Rosenblueth, E. (1971). Fundamentals of Earthquake Engineering. Englewood Cliffs, New Jersey: Prentice Hall.
New Zealand Standard (NZS). (2004). Design of Reinforced Concrete Masonry Structures, NZS 4230. Wellington, New Zealand.
Obaidat, A. T. (2017). Compressive behaviour of C-shaped reinforced masonry boundary elements. Ph.D. Thesis, Concordia University, Montreal, Canada.
Obaidat, A. T., Ashour, A., and Galal, K. (2018). Stress-strain behavior of C-shaped confined concrete masonry boundary elements of reinforced masonry shear walls. Journal of Structural Engineering, 144(8), 1–15. 
Orakcal, K., Ulugtekin, D., and Massone, L. M. (2012). Constitutive modeling of reinforced concrete panel behavior under cyclic loading. In 15th World Conference on Earthquake Engineering, Lisbon, Portugal.
Orakcal, K., and Wallace, J. W. (2006). Flexural Modeling of Reinforced Concrete Walls-Experimental Verification. ACI Structural Journal, 103(2), 196–206.
Orakcal, K., Wallace, J. W., and Conte, J. P. (2004). Flexural Modeling of Reinforced Concrete Walls-Model Attributes. ACI Structural Journal, 101(5), 688–698.
Park, R., and Paulay, T. (1975). Reinforced Concrete Structures. John Wiley and Sons, Inc.
Paulay, T., and Priestley, M. J. N. (1992). Seismic design of reinforced concrete and masonry buildings. John Wiley and Sons, Inc.
Priestley, M. J. N., Calvi, G. M., and Kowalsky, M. J. (2007). Displacement based seismic design of structures. Pavia, Italy: Istituto Universitario di Studi Superiori (IUSS).
Priestley, M. J. N., and Chai, Y. H. (1984). Prediction of Masonry Compression Strength Part 1. New Zealand Concrete Construction, 28, 11–14.
Priestley, M. J. N., and Elder, D. M. (1982). Cyclic loading tests of slender concrete masonry shear walls. Bulletin of the New Zealand National Society for Earthquake Engineering, 15(1), 3–21.
Pugh, J. S., Lowes, L. N., and Lehman, D. E. (2015). Nonlinear line-element modeling of flexural reinforced concrete walls. Engineering Structures, 104, 174–192. 
Sarhat, S. R., and Sherwood, E. G. (2013). The prediction of compressive strength of grouted hollow concrete block masonry based on the contribution of its individual components. In 12th Canadian Masonry Symposium. Vancouver, B.C., Canada.
Seismosoft. (2016). SeismoStruct 2016 - A computer program for static and dynamic analysis of framed structures. Available from http://www.seismosoft.com.
Shedid, M., El-Dakhakhni, W., and Drysdale, R. (2010a). Alternative strategies to enhance the seismic performance of reinforced concrete-block shear wall systems. Journal of Structural Engineering, 136(6), 676–689. 
Shedid, M., El-Dakhakhni, W., and Drysdale, R. (2010b). Characteristics of rectangular, flanged, and end-confined reinforced concrete masonry shear walls for seismic design. Journal of Structural Engineering, 136(12), 1471–1482. 
Shedid, M., and Drysdale, R., El-Dakhakhni, W. (2008). Behavior of fully grouted reinforced concrete masonry shear walls failing in flexure: experimental results. Journal of Structural Engineering, 134(11), 2032–2044. 
Shedid, M., El-Dakhakhni, W., and Drysdale, R. (2011). Seismic response modification factors for reinforced masonry structural walls. Journal of Performance of Constructed Facilities, 25(2), 74–86. 
Shedid, M., El-Dakhakhni, W., and Drysdale, R. (2009). Behavior of fully grouted reinforced concrete masonry shear walls failing in flexure: Analysis. Engineering Structures, 31(9), 2032–2044. 
Shegay, A. V., Motter, C. J., Elwood, K. J., Henry, R. S., Lehman, D. E., and Lowes, L. N. (2018). Impact of axial load on the seismic response of rectangular walls. Journal of Structural Engineering, 144(8), 1–32.
Shing, P. B., Brunner, J. D., and Lotfi, H. R. (1993). Evaluation of shear strength of reinforced masonry walls. The Masonry Society Journal, 12(1), 61–76.
Shing, P. B., Klamerus, E., Spaeh, H., and Noland, J. L. (1988). Seismic performance of reinforced masonry shear Walls. In 9th World Conference on Earthquake Engineering. Tokyo-Kyoto, Japan.
Shing, P. B., Schuller, M., and Hoskere, V. S. (1990). In‐plane resistance of reinforced masonry shear walls. Journal of Structural Engineering, 116(3), 619–640.
Shing, P., Carter, E., and Noland, J. (1993). Influence of confining steel on flexural response of reinforced masonry shear walls. The Masonry Society Journal, 11(2), 72–85.
Siyam, M., Konstantinidis, D., and El-Dakhakhni, W. (2016). Collapse fragility evaluation of ductile reinforced concrete block wall systems for seismic risk assessment. Journal of Performance of Constructed Facilities, 30(6), 1–14. 
Snook, M., McLean, D., McDaniel, C., and Pollock, D. (2005). Effects of confinement reinforcement on the performance of masonry shear walls. In 14th Canadian Masonry Symposium. Banff, Alberta, Canada.
Su, R. K. L., and Wong, S. M. (2007). Seismic behaviour of slender reinforced concrete shear walls under high axial load ratio. Engineering Structures, 29(8), 1957–1965. 
The Masonry Society (TMS). (2016). Building Code Requirements and Specifications for Masonry Structures, TMS 402/602-16. Longmont, Colorado, United States of America.
Tomazevic, M. (1999). Earthquake resistant design of masonry buildings. London: Imperial College Press.
Tso, W. K., Zhu, T. J., and Heidebrecht, A. C. (1992). Engineering implication of ground motion A / V ratio. Soil Dynamics and Earthquake Engineering, 11, 133–144. 
Vamvatsikos, D., and Cornell, C. A. (2002). Incremental dynamic analysis. Earthquake Engineering and Structural Dynamics, 31(3), 491–514. 
Vamvatsikos, D., and Cornell, C. A. (2004). Applied incremental dynamic analysis. Earthquake Spectra, 20(2), 523–553.
Vulcano, A., Bertero, V. V., and Colotti, V. (1988). Analytical modeling of R/C structural walls. In 9th World Conference on Earthquake Engineering, (pp. 41–44). Tokyo-Kyoto, Japan.
Wilson, E. (2001). Static and dynamic analysis of structures. Berkeley, California, United States of America: Computers and Structures Inc. 
Yuen, Y., and Kuang, J. (2014). Axial compression effect on ductility design of reinforced concrete structural walls. In Second European Conference On Earthquake Engineering and Seismology. Istanbul, Turkey.
Zhang, Y., and Wang, Z. (2000). Seismic behavior of reinforced concrete shear walls subjected to high axial loading. ACI Structural Journal, 97(5), 739–750.
Zhao, J., and Sritharan, S. (2007). Modeling of strain penetration effects in fiber-based analysis of reinforced concrete structures. ACI Structural Journal, 104(2), 133–141.
Zhao, Y., and Wang, F. (2015). Experimental studies on behavior of fully grouted reinforced-concrete masonry shear walls. Earthquake Engineering and Engineering Vibration, 14(4), 743–757.