[1] A. M. El-Refaie, “Motors/generators for traction/propulsion applications: A review,” IEEE Vehicular Technology Magazine, vol. 8, no. 1, pp. 90-99, March 2013.
[2] B. Bilgin, P. Magne, P. Malysz, Y. Yang, V. Pantelic, M. Preindl, A. Korobkine, W. Jiang, M. Lawford, and A. Emadi, “Making the case for electrified transportation,” IEEE Transactions on Transportation Electrification, vol. 1, no. 1, pp. 4-17, June 2015.
[3] A. M. El-Refaie, “Fault-tolerant permanent magnet machines: a review,” IET Electric Power Applications, vol. 5, no. 1, pp. 59-74, January 2011.
[4] E. Levi, “Multiphase electric machines for variable-speed applications,” IEEE Transactions on Industrial Electronics, vol. 55, no. 5, pp. 1893-1909, May 2008.
[5] K. T. Chau, C. C. Chan, and C. Liu, “Overview of  permanent-magnet brushless drives for electric and hybrid electric vehicles,” IEEE Transactions on Industrial Electronics, vol. 55, no. 6, pp. 2246-2257, June 2008.
[6] C. C. Chan, “The state of the art of electric, hybrid, and fuel cell vehicles,” Proceedings of the IEEE, vol. 95, no. 4, pp. 704-718, April 2007.
[7] J. A. P. Lopes, F. J. Soares, and P. M. R. Almeida,    integration of electric vehicles in the electric power system,” Proceedings of the IEEE, vol. 99, no. 1, pp. 168-183, Jan 2011.
[8] J. H. Kim, Y. Li, and B. Sarlioglu, “Novel six-slot four-pole axial flux-switching permanent magnet machine for electric vehicle,” IEEE Transactions on Transportation Electrification, vol. 3, no. 1, pp. 108-117, March 2017.
[9] Z. Yang, F. Shang, I. P. Brown, and M. Krishnamurthy, “Comparative study of interior permanent magnet, induction, and switched reluctance motor drives for ev and hev applications,” IEEE Transactions on Transportation Electrification, vol. 1, no. 3, pp. 245-254, Oct 2015.
[10] E. Bostanci, M. Moallem, A. Parsapour, and B. Fahimi, “Opportunities and challenges of switched reluctance motor drives for electric propulsion: A comparative study,” IEEE Transactions on Transportation Electrification, vol. 3, no. 1, pp. 58-75, March 2017.
[11] H. J. Slater, D. J. Atkinson, and A. G. Jack, “Real-time emulation for power equipment development. ii. the virtual machine,” IEE Proceedings - Electric Power Applications, vol. 145, no. 3, pp. 153-158, May 1998.
[12] A. Schmitt, J. Richter, M. Gommeringer, T. Wersal, and M. Braun, “A novel 100 kw power hardware-in-the-loop emulation test bench for permanent magnet synchronous machines with nonlinear magnetics,” in 8th IET International Conference on Power Electronics, Machines and Drives (PEMD 2016), April 2016, pp. 1-6.
[13] O. Vodyakho, M. Steurer, C. S. Edrington, and F. Fleming, “An induction machine emulator for high-power applications utilizing advanced simulation tools with graphical user interfaces,” IEEE Transactions on Energy Conversion, vol. 27, no. 1, pp. 160-172, March 2012.
[14] R. M. Kennel, T. Boller, and J. Holtz, “Replacement of electrical (load) drives by a hardware-in-the-loop system,” in International Aegean Conference on Electrical Machines and Power Electronics and Electromotion, Joint Conference, Sept 2011, pp. 17-25.
[15] A. Schmitt, J. Richter, U. Jurkewitz, and M. Braun, “Fpga-based real-time simulation of nonlinear permanent magnet synchronous machines for power hardware in-the-loop emulation systems,” in IECON 2014 - 40th Annual Conference of the IEEE Industrial Electronics Society, Oct 2014, pp. 3763-3769.
[16] T. Boller and R. M. Kennel, “Virtual machine - a hardware in the loop test for drive inverters,” in 2009 13th European Conference on Power Electronics and Applications, Sept 2009, pp. 1-5.
[17] R. S. Kaarthik and P. Pillay, “Emulation of a permanent magnet synchronous generator in real-time using power hardware-in-the-loop,” in 2016 IEEE International Conference on Power Electronics, Drives and Energy Systems (PEDES), Dec 2016, pp. 1-6.
[18] Y. S. Rao and M. C. Chandorkar, “Real-time electrical load emulator using optimal feedback control technique,” IEEE Transactions on Industrial Electronics, vol. 57, no. 4, pp. 1217-1225, April 2010.
[19] S. Grubic, B. Amlang, W. Schumacher, and A. Wenzel, “A high-performance electronic hardware-in-the-loop drive - load simulation using a linear inverter (linverter),” IEEE Transactions on Industrial Electronics, vol. 57, no. 4, pp.1208-1216, April 2010.
[20] M. A. Masadeh, K. S. Amitkumar, and P. Pillay, “Power electronic converter based induction motor emulator including main and leakage flux saturation,” IEEE Transactions on Transportation Electrification, vol. 4, no. 2, pp. 483-493,June 2018.
[21] A. Hoke, S. Chakraborty, and T. Basso, “A power hardware-in-the-loop framework for advanced grid-interactive inverter testing,” in 2015 IEEE Power Energy Society Innovative Smart Grid Technologies Conference (ISGT), Feb 2015, pp. 1-5.
[22] G. F. Lauss, M. O. Faruque, K. Schoder, C. Dufour, A. Viehweider, and J. Langston, “Characteristics and design of power hardware-in-the-loop simulations for electrical power systems,” IEEE Transactions on Industrial Electronics, vol. 63, no. 1, pp. 406-417, Jan 2016.
[23] R. S. Kaarthik, J. Maisonneuve, and P. Pillay, “Real-time emulation of a pressure retarded osmotic power generation system,” IEEE Transactions on Industry Applications, vol. 53, no. 6, pp. 5768-5776, Nov 2017.
[24] K. S. Amitkumar, R. S. Kaarthik, and P. Pillay, “A versatile power-hardware in-the-loop based emulator for rapid testing of electric drives,” in 2017 IEEE Energy Conversion Congress and Exposition (ECCE), Oct 2017, pp. 5468-5474.
[25] F. E. Fleming and C. S. Edrington, “Real-time emulation of switched reluctance machines via magnetic equivalent circuits,” IEEE Transactions on Industrial Electronics, vol. 63, no. 6, pp. 3366-3376, June 2016.
[26] K. S. Amitkumar, R. S. Kaarthik, and P. Pillay, “A versatile power-hardware-inthe-loop based emulator for rapid testing of transportation electric drives,” IEEE Transactions on Transportation Electrification, pp. 1-1, 2018.
[27] F. Huerta, R. L. Tello, and M. Prodanovic, “Real-time power-hardware-in-theloop implementation of variable-speed wind turbines,” IEEE Transactions on Industrial Electronics, vol. 64, no. 3, pp. 1893-1904, March 2017.
[28] M. Ashourianjozdani, L. A. C. Lopes, and P. Pillay, “Converter-based pmsg emulator: A testbed for renewable energy experiments,” in 2017 IEEE International Electric Machines and Drives Conference (IEMDC), May 2017, pp. 1-7.
[29] R. S. Kaarthik, K. S. Amitkumar, and P. Pillay, “Emulation of a permanent magnet synchronous generator in real-time using power hardware-in-the-loop,” IEEE Transactions on Transportation Electrification, vol. PP, no. 99, pp. 1-1, 2017.
[30] Y. Lee, Y. Kwon, and S. Sul, “Dc-link voltage design of high-bandwidth motor emulator for interior permanent-magnet synchronous motors,” in 2018 IEEE Energy Conversion Congress and Exposition (ECCE), Sep. 2018, pp. 4453-4459.
[31] L. Wang and J. Jatskevich, “A voltage-behind-reactance induction machine model for the emtp-type solution,” in 2009 IEEE Power Energy Society General Meeting, July 2009, pp. 1-1.
[32] O. A. Mohammed, S. Liu, and Z. Liu, “A phase variable model of brushless dc motors based on finite element analysis and its coupling with external circuits,” IEEE Transactions on Magnetics, vol. 41, no. 5, pp. 1576-1579, May 2005.
[33] M. Fazil and K. R. Rajagopal, “Nonlinear dynamic modeling of a single-phase permanent-magnet brushless dc motor using 2-d static finite-element results,” IEEE Transactions on Magnetics, vol. 47, no. 4, pp. 781-786, April 2011.
[34] P. P. Silvester and R. P. Gupta, “Effective computational models for anisotropic soft b-h curves,” IEEE Transactions on Magnetics, vol. 27, no. 5, pp. 3804-3807, Sept 1991.
[35] T. Ould-Bachir, C. Dufour, J. Belanger, J. Mahseredjian, and J. P. David, “Effective floating-point calculation engines intended for the fpga-based hil simulation,” in 2012 IEEE International Symposium on Industrial Electronics, May 2012, pp. 1363-1368.
[36] D. N. Dyck, T. Rahman, and C. Dufour, “Internally consistent nonlinear behavioral model of a pm synchronous machine for hardware-in-the-loop simulation,” IEEE Transactions on Magnetics, vol. 50, no. 2, pp. 853-856, Feb 2014.
[37] S. Abourida, C. Dufour, J. B´elanger, T. Yamada, and T. Arasawa, “Hardware-inthe-loop simulation of finite-element based motor drives with rt-lab and jmag,” in 2006 IEEE International Symposium on Industrial Electronics, vol. 3, July
2006, pp. 2462-2466.
[38] C. Dufour, S. Cense, T. Yamada, R. Imamura, and J. B´elanger, “Fpga permanent magnet synchronous motor floating-point models with variable-dq and spatial harmonic finite-element analysis solvers,” in 2012 15th International Power Electronics and Motion Control Conference (EPE/PEMC), Sept 2012, pp. LS6b.2-1-LS6b.2-10.
[39] Y. Inaba, S. Cense, T. O. Bachir, H. Yamashita, and C. Dufour, “A dual highspeed pmsm motor drive emulator with finite element analysis on fpga chip with full fault testing capability,” in Proceedings of the 2011 14th European Conference on Power Electronics and Applications, Aug 2011, pp. 1-10.
[40] M. Fischer, “Design of a three-phase 100a linear amplifier for powerhardware-in-the-loop machine emulation,” The Journal of Engineering, vol. 2019, pp. 4041-4044(3), June 2019. [Online]. Available: https: //digital-library.theiet.org/content/journals/10.1049/joe.2018.8142
[41] D. Kastha and B. K. Bose, “Investigation of fault modes of voltage-fed inverter system for induction motor drive,” IEEE Transactions on Industry Applications, vol. 30, no. 4, pp. 1028-1038, July 1994.
[42] H. T. Eickhoff, R. Seebacher, A. Muetze, and E. G. Strangas, “Enhanced and fast detection of open-switch faults in inverters for electric drives,” IEEE Transactions on Industry Applications, vol. 53, no. 6, pp. 5415-5425, Nov 2017.
[43] W. Sleszynski, J. Nieznanski, and A. Cichowski, “Open-transistor fault diagnostics in voltage-source inverters by analyzing the load currents,” IEEE Transactions on Industrial Electronics, vol. 56, no. 11, pp. 4681-4688, Nov 2009.
[44] B. Lu and S. K. Sharma, “A literature review of igbt fault diagnostic and protection methods for power inverters,” IEEE Transactions on Industry Applications, vol. 45, no. 5, pp. 1770-1777, Sep. 2009.
[45] H. Nian and W. Hu, “Torque ripple suppression method with reduced switching frequency for open-winding pmsm drives with common dc bus,” IEEE Transactions on Industrial Electronics, pp. 1-1, 2018.
[46] S. Dai, J. Wei, B. Zhou, and J. Xue, “The control strategy of open-winding permanent magnet synchronous motor drive system based on five-leg inverter,” in 2016 IEEE Vehicle Power and Propulsion Conference (VPPC), Oct 2016, pp.1-5.
[47] F. Aghili, “Method and apparatus for improving output of a multi-winding motor,” U.S. Patent 8 994 308 B2, 31, 2015.
[48] F. Aghili, “Optimal and fault-tolerant torque control of servo motors subject to voltage and current limits,” IEEE Transactions on Control Systems Technology, vol. 21, no. 4, pp. 1440-1448, July 2013.
[49] J. S. S. Prasad, T. Bhavsar, R. Ghosh, and G. Narayanan, “Vector control of three-phase ac/dc front-end converter,” Sadhana, vol. 33, no. 5, pp. 591-613, 2008.
[50] OP4510 RT-LAB-RCP/HIL SYSTEMS: User Guide, OPAL-RT Technologies, 12 2015.
[51] OP5511 High-current and high-voltage input conditioning module, OPAL-RT Technologies, 9 2016, rev. E.
[52] M. Ibrahim, L. Masisi, and P. Pillay, “Design of variable-flux permanent-magnet machines using alnico magnets,” IEEE Transactions on Industry Applications, vol. 51, no. 6, pp. 4482-4491, Nov 2015.
[53] L. Masisi, M. Ibrahim, and P. Pillay, “Control strategy of a variable flux machine using alnico permanent magnets,” in 2015 IEEE Energy Conversion Congress and Exposition (ECCE), Sept 2015, pp. 5249-5255.
[54] AETechron. (2015) Aetechron-7548 datasheet. [Online]. Available: http: //aetechron.com/pdf/7548specsheet.pdf
[55] OPAL-RT. (2015) Op4510 datasheet. [Online]. Available: https://www.opal-rt.com/wp-content/themes/enfold-opal/pdf/L00161 0124.pdf 
[56] V. Ostovic, “Memory motors,” IEEE Industry Applications Magazine, vol. 9, no. 1, pp. 52-61, Jan 2003.
[57] R. Thike and P. Pillay, “Characterization of a variable flux machine for transportation using a vector-controlled drive,” IEEE Transactions on Transportation Electrification, vol. 4, no. 2, pp. 494-505, June 2018.
[58] R. Thike and P. Pillay, “Automatic inductance measurements of synchronous reluctance machines
including cross-saturation using real-time systems,” in 2018 IEEE Energy Conversion Congress and Exposition (ECCE), Sep. 2018, pp. 6121-6127.
[59] Y. Chen and V. Dinavahi, “Digital hardware emulation of universal machine and universal line models for real-time electromagnetic transient simulation,” IEEE Transactions on Industrial Electronics, vol. 59, no. 2, pp. 1300-1309, Feb 2012.
[60] B. Jandaghi and V. Dinavahi, “Real-time hil emulation of faulted electric machines based on nonlinear mec model,” IEEE Transactions on Energy Conversion, vol. 34, no. 3, pp. 1190-1199, Sep. 2019.
[61] C. Dufour, S. Cense, and J. Blanger, “An induction machine and power electronic test system on a field-programmable gate array,” Mathematics and Computers in Simulation, vol. 130, pp. 112 - 123, 2016, 11th International Conference on Modeling and Simulation of Electric Machines, Converters and Systems. [Online]. Available: http://www.sciencedirect.com/science/article/pii/S0378475416300659
[62] C. Dufour, S. Cense, T. Ould-Bachir, L. Grgoire, and J. Blanger, “Generalpurpose reconfigurable low-latency electric circuit and motor drive solver on fpga,” in IECON 2012 - 38th Annual Conference on IEEE Industrial Electronics Society, Oct 2012, pp. 3073-3081.
[63] R. Teodorescu, F. Blaabjerg, M. Liserre, and P. C. Loh, “Proportional-resonant controllers and filters for grid-connected voltage-source converters,” IEE Proceedings - Electric Power Applications, vol. 153, no. 5, pp. 750-762, Sep. 2006.
[64] A. Timbus, M. Liserre, R. Teodorescu, P. Rodriguez, and F. Blaabjerg, “Evaluation of current controllers for distributed power generation systems,” IEEE Transactions on Power Electronics, vol. 24, no. 3, pp. 654-664, March 2009.
[65] M. Liserre, R. Teodorescu, and F. Blaabjerg, “Multiple harmonics control for three-phase grid converter systems with the use of pi-res current controller in a rotating frame,” IEEE Transactions on Power Electronics, vol. 21, no. 3, pp. 836-841, May 2006.
[66] A. Kuperman, “Proportional-resonant current controllers design based on desired transient performance,” IEEE Transactions on Power Electronics, vol. 30, no. 10, pp. 5341-5345, Oct 2015.
[67] O. Wallmark, L. Harnefors, and O. Carlson, “Control algorithms for a faulttolerant pmsm drive,” IEEE Transactions on Industrial Electronics, vol. 54, no. 4, pp. 1973-1980, Aug 2007.
[68] J. Gao, X. Wu, S. Huang, W. Zhang, and L. Xiao, “Torque ripple minimisation of permanent magnet synchronous motor using a new proportional resonant controller,” IET Power Electronics, vol. 10, no. 2, pp. 208-214, 2017.
[69] G. Feng, C. Lai, J. Tian, and N. C. Kar, “Multiple reference frame based torque ripple minimization for pmsm drive under both steady-state and transient conditions,” IEEE Transactions on Power Electronics, vol. 34, no. 7, pp. 6685- 6696, July 2019.
[70] M. Hadziselimovic, G. Stumberger, B. tumberger, and I. Zagradinik, “Modeling of permanent magnet synchronous motor in d-q coordinates,” vol. 81, pp. 38-42, 01 2005.
[71] A. M. EL-Refaie, “Motors/generators for traction /propulsion applications: A review,” in 2011 IEEE International Electric Machines Drives Conference (IEMDC), May 2011, pp. 490-497.
[72] C. Lu, S. Ferrari, and G. Pellegrino, “Two design procedures for pm synchronous machines for electric powertrains,” IEEE Transactions on Transportation Electrification, vol. 3, no. 1, pp. 98-107, March 2017.
[73] M. Morandin, A. Faggion, and S. Bolognani, “Integrated starter-alternator with sensorless ringed-pole pm synchronous motor drive,” IEEE Transactions on Industry Applications, vol. 51, no. 2, pp. 1485-1493, March 2015.
[74] M. C. Kulan, N. J. Baker, and J. D. Widmer, “Design and analysis of compressed windings for a permanent magnet integrated starter generator,” IEEE Transactions on Industry Applications, vol. 53, no. 4, pp. 3371-3378, July 2017.
[75] C. Liu, K. T. Chau, and J. Z. Jiang, “A permanent-magnet hybrid brushless integrated starter-generator for hybrid electric vehicles,” IEEE Transactions on Industrial Electronics, vol. 57, no. 12, pp. 4055-4064, Dec 2010.
[76] C. F. Wang, M. J. Jin, J. X. Shen, and C. Yuan, “A permanent magnet integrated starter generator for electric vehicle onboard range extender application,” IEEE Transactions on Magnetics, vol. 48, no. 4, pp. 1625-1628, April 2012.
[77] L. Yu, Z. Zhang, and Y. Yan, “Development and analysis of doubly salient brushless dc generators for automobile auxiliary power unit application,” in 2013 IEEE Vehicle Power and Propulsion Conference (VPPC), Oct 2013, pp. 1-6.
[78] K. W. Hu and C. M. Liaw, “Incorporated operation control of dc microgrid and electric vehicle,” IEEE Transactions on Industrial Electronics, vol. 63, no. 1, pp. 202-215, Jan 2016.
[79] F. Crescimbini, A. D. Napoli, L. Solero, and F. Caricchi.
[80] F. Gao, X. Zheng, S. Bozhko, C. I. Hill, and G. Asher, “Modal analysis of a pmsgbased dc electrical power system in the more electric aircraft using eigenvalues sensitivity,” IEEE Transactions on Transportation Electrification, vol. 1, no. 1, pp. 65-76, June 2015.
[81] A. Hasanzadeh, C. S. Edrington, N. Stroupe, and T. Bevis, “Real-time emulation of a high-speed microturbine permanent-magnet synchronous generator using multiplatform hardware-in-the-loop realization,” IEEE Transactions on Industrial Electronics, vol. 61, no. 6, pp. 3109-3118, June 2014.
[82] P. O. Ohiero, C. Cossar, and J. Melone, “A fast simulation model for a permanent magnet synchronous generator (pmsg) drive system,” in 16th European Conference on Power Electronics and Applications (EPE’14-ECCE Europe), 2014, Aug 2014, pp. 1-10.
[83] M. Rosyadi, A. Umemura, R. Takahashi, J. Tamura, S. Kondo, and K. Ide, “Development of phasor type model of pmsg based wind farm for dynamic simulation analysis,” in PowerTech, 2015 IEEE Eindhoven, June 2015, pp. 1-6.
[84] W. Meng, X. Wang, Z. Wang, and I. Kamwa, “Impact of causality on performance of phasor measurement unit algorithms,” IEEE Transactions on Power Systems, vol. PP, no. 99, pp. 1-1, 2017.
[85] S. Hamao, “A physical contradiction in network theory,” IEEE Transactions on Circuits and Systems I: Fundamental Theory and Applications, vol. 47, no. 11, pp. 1610-1612, Nov 2000.
[86] N. Pogaku, M. Prodanovic, and T. C. Green, “Modeling, analysis and testing of autonomous operation of an inverter-based microgrid,” IEEE Transactions on Power Electronics, vol. 22, no. 2, pp. 613-625, March 2007.