1. D. M. Sheen, D. L. Mcmakin and T. E. Hall, "Three-dimensional millimeter-wave imaging for concealed weapon detection", IEEE Trans. Microw. Theory Techn., vol. 49, pp. 1581-1592, Sep. 2001.
 
2. H. Zamani and M. Fakharzadeh, "1.5-D sparse array for millimeter-wave imaging based on compressive sensing techniques", IEEE Trans. Antennas Propag., vol. 66, no. 4, pp. 2008-2015, Apr. 2018.
 
3. Z. Briqech and A.-R. Sebak, "Millimeter-wave imaging system using a 60 GHz dual-polarized AFTSA-SC probe", Proc. 33rd Nat. Radio Sci. Conf. (NRSC), pp. 325-332, Feb. 2016.
 
4. D. M. Sheen, J. L. Fernandes, J. R. Tedeschi, D. L. Mcmakin, A. M. Jones, W. M. Lechelt, et al., "Wide-bandwidth wide-beamwidth high-resolution millimeter-wave imaging for concealed weapon detection", Proc. SPIE, vol. 87150, pp. 871509-1-871509-11, May 2013.
 
5. A. U. Zaman, E. Rajo-Iglesias, E. Alfonso and P.-S. Kildal, "Design of transition from coaxial line to ridge gap waveguide", Proc. IEEE Antennas Propag. Soc. Int. Symp., pp. 1-4, Jun. 2009.
 
6. P. S. Kildal, "Three metamaterial-based gap waveguides between parallel metal plates for mm/submm waves", Proc. 3rd Eur. Conf. Antennas Propag., pp. 28-32, 2009.
 
7. P.-S. Kildal, A. U. Zaman, E. Rajo-Iglesias, E. Alfonso and A. Valero-Nogueira, "Design and experimental verification of ridge gap waveguide in bed of nails for parallel-plate mode suppression", IET Microw. Antennas Propag., vol. 5, no. 3, pp. 262-270, 2011.
 
8. H. Raza, J. Yang, P.-S. Kildal and E. A. Alos, "Microstrip-ridge gap waveguide–study of losses bends and transition to WR-15", IEEE Trans. Microw. Theory Techn., vol. 62, no. 9, pp. 1943-1952, Sep. 2014.
 
9. A. Beltayib and A.-R. Sebak, "Analytical design procedure for forward wave couplers in RGW technology based on hybrid PEC/PMC waveguide model", IEEE Access, vol. 7, pp. 119319-119331, 2019.
 
10. S. Birgermajer, N. Jankovic, V. Radonic, V. Crnojevic-Bengin and M. Bozzi, "Microstrip-ridge gap waveguide filter based on cavity resonators with mushroom inclusions", IEEE Trans. Microw. Theory Techn., vol. 66, no. 1, pp. 136-146, Jan. 2018.
 
11. A. Beltayib, I. Afifi and A.-R. Sebak, " \$4times4\$ -element cavity slot antenna differentially-fed by odd mode ridge gap waveguide ", IEEE Access, vol. 7, pp. 48185-48195, 2019.

12. I. Afifi, M. M. M. Ali and A. R. Sebak, "Analysis and design of a 30 GHz printed ridge gap Ring-crossover", Proc. USNC-URSI Radio Sci. Meeting (Joint AP-S Symp.), pp. 65-66, 2019.
 
13. M. M. M. Ali, S. I. Shams and A.-R. Sebak, "Printed ridge gap waveguide 3-dB coupler: Analysis and design procedure", IEEE Access, vol. 6, pp. 8501-8509, 2018.
 
14. M. M. M. Ali and A.-R. Sebak, "2-D scanning magnetoelectric dipole antenna array fed by RGW butler matrix", IEEE Trans. Antennas Propag., vol. 66, no. 11, pp. 6313-6321, Nov. 2018.
 
15. S. M. Sifat, M. M. M. Ali, S. I. Shams and A.-R. Sebak, "High gain bow-tie slot antenna array loaded with grooves based on printed ridge gap waveguide technology", IEEE Access, vol. 7, pp. 36177-36185, 2019.
 
16. A. T. Hassan and A. A. Kishk, "Efficient procedure to design large finite array and its feeding network with examples of ME-dipole array and microstrip ridge gap waveguide feed", IEEE Trans. Antennas Propag..
 
17. D. Il Kim and Y. Naito, "Broad-band design of improved hybrid-ring 3-dB directional couplers", IEEE Trans. Microw. Theory Techn., vol. MTT-30, no. 11, pp. 2040-2046, Nov. 1982.
 
18. S. March, "A wideband stripline hybrid ring (Correspondence)", IEEE Trans. Microw. Theory Techn., vol. MTT-16, no. 6, pp. 361, Jun. 1968.
 
19. R. Smolarz, K. Wincza and S. Gruszczynski, "Impedance transforming rat-race couplers with modified lange section", J. Electromagn. Waves Appl., vol. 32, no. 8, pp. 972-983, 2018.
 
20. M.-H. Murgulescu, P. Legaud, E. Moisan, E. Penard, M. Goloubkoff and I. Zaquine, "New small size wideband 180° ring couplers: Theory and experiment", Proc. 24th Eur. Microw. Conf., pp. 670-674, Sep. 1994.
 
21. C.-W. Kao and C. Hsiung Chen, "Novel uniplanar 180° hybrid-ring couplers with spiral-type phase inverters", IEEE Microw. Guided Wave Lett., vol. 10, no. 10, pp. 412-414, Oct. 2000.
 
22. C.-W. Kao and C. H. Chen, " Miniaturized uniplanar 180° hybrid-ring couplers with \$0.8~lambda_{g}\$ and \$0.67~lambda_{g}\$ circumferences ", Proc. Asia–Pacific Microw. Conf., pp. 217-220, 2000.
 
23. C.-H. Chi and C.-Y. Chang, "A compact wideband 180° hybrid ring coupler using a novel interdigital CPS inverter", Proc. Eur. Microw. Conf., pp. 548-551, 2007.
 
24. C.-Y. Chang and C.-C. Yang, "A novel broad-band chebyshev-response rat-race ring coupler", IEEE Trans. Microw. Theory Techn., vol. 47, no. 4, pp. 455-462, Apr. 1999.
 
25. J. Sorocki, I. Piekarz, K. Wincza and S. Gruszczynski, "Bandwidth improvement of rat-race couplers having left-handed transmission-line sections", Int. J. RF Microw. Comput.-Aided Eng., vol. 24, no. 3, pp. 341-347, May 2014.
 
26. D. Kholodnyak, P. Kapitanova, S. Humbla, R. Perrone, J. Mueller, M. A. Hein, et al., "180° power dividers using metamaterial transmission lines", Proc. 14th Conf. Microw. Techn., pp. 1-4, Apr. 2008.
 
27. K. Staszek, J. Kolodziej, K. Wincza and S. Gruszczynski, "Compact broadband rat-race coupler in multilayer technology designed with the use of artificial right- and left-handed transmission lines", J. Telecommun. Inf. Technol., no. 2, pp. 107-112, 2012.
 
28. J.-A. Hou and Y.-H. Wang, "Design of compact 90° and 180° couplers with harmonic suppression using lumped-element bandstop resonators", IEEE Trans. Microw. Theory Techn., vol. 58, no. 11, pp. 2932-2939, Nov. 2010.
 
29. G. Brzezina and L. Roy, "Miniaturized 180° hybrid coupler in LTCC for L-Band applications", IEEE Microw. Wireless Compon. Lett., vol. 24, no. 5, pp. 336-338, May 2014.
 
30. G. Slade, "Reduced-size octave-bandwidth microstrip/lumped-element rat-race coupler", Jun. 2008, [online] Available: https://www.researchgate.net/publication/229009635_Reduced-size_octavebandwidth_microstriplumped-element_rat-race_coupler.
 
31. I. Haroun, Y. C. Hsu, D. C. Chang and C. Plett, "A novel reduced-size 60-GHz 180° coupler using LG-CPW transmission lines", Proc. Asia–Pacific Microw. Conf., pp. 1750-1753, 2011.
 
32. S. Koziel and P. Kurgan, "On elementary cell selection for miniaturized microstrip rat-race coupler design", Proc. Int. Conf. Electromagn. Adv. Appl. (ICEAA), pp. 836-839, Sep. 2017.
 
33. K. V. Phani Kumar, R. K. Barik, I. S. Krishna and S. S. Karthikeyan, "Design of compact 180° hybrid coupler for unequal power division ratio using slow wave structures", Proc. 23rd Nat. Conf. Commun. (NCC), pp. 1-5, Mar. 2017.
 
34. K. Sen Ang, Y. Choy Leong and C. How Lee, "A new class of multisection 180° hybrids based on cascadable hybrid-ring couplers", IEEE Trans. Microw. Theory Techn., vol. 50, no. 9, pp. 2147-2152, Sep. 2002.
 
35. W. Che, K. Deng, E. K. N. Yung and K. Wu, "H-plane 3-dB hybrid ring of high isolation in substrate-integrated rectangular waveguide (SIRW)", Microw. Opt. Technol. Lett., vol. 48, no. 3, pp. 502-505, Mar. 2006.
 
36. R. Dehdasht-Heydari, K. Forooraghi and M. Naser-Moghadasi, "Efficient and accurate analysis of a substrate integrated waveguide (SIW) rat-race coupler excited by four U-shape slot-coupled transitions", Appl. Comput. Electromagn. Soc. J., vol. 30, no. 1, pp. 42-49, 2015.
 
37. X. Zou, C.-M. Tong, C.-Z. Li and W.-J. Pang, "Wideband hybrid ring coupler based on half-mode substrate integrated waveguide", IEEE Microw. Wireless Compon. Lett., vol. 24, no. 9, pp. 596-598, Sep. 2014.
 
38. Y. Ding and K. Wu, "Miniaturized hybrid ring circuits using T-type folded substrate integrated waveguide (TFSIW)", IEEE MTT-S Int. Microw. Symp. Dig., pp. 705-708, Jun. 2009.
 
39. A. A. M. Ali, H. B. El-Shaarawy and H. Aubert, "Miniaturized hybrid ring coupler using electromagnetic bandgap loaded ridge substrate integrated waveguide", IEEE Microw. Wireless Compon. Lett., vol. 21, no. 9, pp. 471-473, Sep. 2011.
 
40. J. Yang and H. Raza, "Empirical formulas for designing gap-waveguide hybrid ring coupler", Microw. Opt. Technol. Lett., vol. 55, no. 8, pp. 1917-1920, Aug. 2013.
 
41. I. Afifi, M. M. M. Ali and A.-R. Sebak, "Analysis and design of a wideband coaxial transition to metal and printed ridge gap waveguide", IEEE Access, vol. 6, pp. 70698-70706, 2018.
 
42. M. D. Pozar, Microwave Engineering, Hoboken, NJ, USA:Wiley, 2011.