Ahmadi Koutalan, F. (2012). “Displacement-based Seismic Design and Tools for Reinforced Masonry Shear-Wall Structures.” Ph. D. Thesis, The University of Texas at Austin, U.S.A.
Ahmadi, F., M. Mavros, R. E. Klingner, B. Shing, and D. McLean. (2015). “Displacement-based seismic design for reinforced masonry shear-wall structures. 2: Validation with shake-table tests.” Earthquake Spectra 31 (2): 999–1019. https://doi.org/10.1193/120212EQS345M.
Albutainy, M., (2016). “Quantification of the Seismic Performance Parameters of Reinforced Concrete Block Shear Walls with Boundary Elements/Walls design, test matrix and test setup”, Internal Report, Department of Building, Civil and Environmental Engineering, Concordia University, Montreal, Quebec, Canada.
Albutainy, M., (2018). Personal Communication, “Layout and reinforcement design detail of RM Building in Montreal”, Concordia University, Montreal, Quebec, Canada.
Aly, N., and Galal K.  (2020). “In-Plane Cyclic Response of High-Rise Reinforced Concrete Masonry Structural Walls with Boundary Elements,” Engineering Structures Journal, Elsevier, 219, 110771.
Arabzadeh, Hamid, and Khaled Galal. (2017). “Seismic Collapse Risk Assessment and FRP Retrofitting of RC Coupled C-Shaped Core Walls Using the FEMA-P695 Methodology.” Journal of Structural Engineering 143 (9): 4017096. https://doi.org/10.1061/(ASCE)ST.1943-541X.0001820.
ASCE, (2016). “Minimum Design Loads and Associated Criteria for Buildings and Other Structures”, ASCE Standard ASCE/SEI 7-16, American Society of Civil Engineers, Reston, VA.
ASCE. (2013). “Seismic evaluation and retrofit of existing buildings.” ASCE 41-13, Reston, VA.
ASCE. (2016). “Minimum Design Loads and Associated Criteria for Buildings and Other Structures” ASCE/SEI 7-16, Reston, VA.
ASCE/SEI 41 (2017). “Seismic evaluation and retrofit of existing buildings.” American Society of Civil Engineers, ASCE/SEI 41–17, Reston, VA.
Ashour A. (2016). “Wall-diaphragm out-of-plane coupling influence on the seismic response of reinforced masonry buildings.” Ph.D. thesis, McMaster University, Hamilton, Canada. 
Assatourians, K., and Atkinson, G. (2010). “Database of processed time series and response spectra for Canada: An example application to study of the 2005 MN 5.4 Riviere du Loup, Quebec. Earthquake.” Seismological Research Letters, 81, 1013–1031.
ATC (Applied Technology Council), (2009a). “Background document: Damage states and fragility curves for reinforced masonry shear walls.” FEMA 58-1/BD 3.8.10, FEMA, Washington, DC. 
ATC (Applied Technology Council). (1985). “Earthquake damage evaluation data for California.” ATC-13. Redwood City, CA: ATC.
ATC (Applied Technology Council). (2006). “Next-generation performance based seismic design guidelines program plan for new and existing buildings”. FEMA 445. Washington, DC: FEMA.
ATC (Applied Technology Council). (2009b). “Quantification of building seismic performance factors.” FEMA-P695. Washington, DC: FEMA.
Atkinson, G. (2009). “Earthquake time histories compatible with the 2005 National Building Code of Canada uniform hazard spectrum.” Can. J. Civil Eng., 36(6), 991–1000. https://doi.org/10.1139/L09-044.
Baker, J. W. (2015). “Efficient analytical fragility function fitting using dynamic structural analysis.” Earthquake Spectra, 31(1), 579–599.
Bankoff, G., Frerks, G., and Hilhorst, D., eds. (2004). “Mapping vulnerability: disasters, development and people.” Earthscan, London, UK.
Banting, B., and El-Dakhakhni, W. (2012). “Force- and Displacement-Based Seismic Performance Parameters for Reinforced Masonry Structural Walls with Boundary Elements.” Journal of Structural Engineering, 138(12), 1477-1491.
Banting, B., and El-Dakhakhni, W. (2014). “Seismic Performance Quantification of Reinforced Masonry Structural Walls with Boundary Elements.” Journal of Structural Engineering, 140(5), 04014001
Berry, M., P., and Eberhard, M., O. (2005). “Practical performance model for bar buckling.” J. Struct. Eng., 131(7), 1060-1070.
Beyer, K., Dazio, A., and Priestley, M. J. N. (2011). “Shear deformations of slender reinforced concrete walls under seismic loading.” ACI Struct. J., 108(2), 167–177.
Beyer, K., Dazio, A., and Priestley, M.J.N. (2008) “Inelastic Wide-Column Models for U-Shaped Reinforced Concrete Walls,” Journal of Earthquake Engineering 12: Sp1, 1-33.
Bohl, A., and Adebar, P. (2011). "Plastic hinge lengths in high-rise concrete shear walls." ACI Structural Journal. 108(2), 148-157.
Bresler, B., and Gilbert, P. H. (1961). “Tie requirements for reinforced concrete columns.” ACI Structural Journal, 58(5), 555-570.
Bruneau, M. & Reinhorn, A., (2007). “Exploring the concept of seismic resilience for acute care facilities.” EERI Spectra Journal, 23(1), 41-62.
Bruneau, M., and Reinhorn, A. M. (2004). “Seismic resilience of communities conceptualization and operationalization.” Proc., Int. Workshop on Performance-Based Seismic Design Concepts and Implementation, P. Fajfar and H. Krawinkler, eds., Bled, Slovenia, 161–172.
Bruneau, M., Chang, S., Eguchi, R., Lee, G., O'Rourke, T., Reinhorn, A., Shinozuka, M., Tierney, K., Wallace, W., & von Winterfelt, D. (2003). “A framework to quantitatively assess and enhance the seismic resilience of communities.” EERI Spectra Journal, 19(4), 733-752.
Calabrese, A., Almeida, J., and Pinho, R. (2010). “Numerical Issues in Distributed Inelasticity Modelling of RC Frame Elements for Seismic Analysis.”  Journal of Earthquake Engineering, 14(sup1), 38-68. 
Calugaru, V., & Panagiotou, M. (2012). “Response of tall cantilever wall buildings to strong pulse type seismic excitation.” Earthquake Engineering & Structural Dynamics, 41(9), 1301-1318.
Canadian Standards Association (CSA). 2014 “Design of masonry structures.” S304-14, Mississauga, Ontario, Canada.
Cancelliere, I., Imbimbo, M., and Sacco, E. (2010). “Experimental tests and numerical modelling of reinforced masonry arches.” Engineering Structures, doi:10.1016/j.engstruct.2009.12.005
Celik OC, Ellingwood B. (2010). “Seismic fragilities for non-ductile reinforced concrete frames – Role of aleatoric and epistemic uncertainties” Structural Safety, doi: 10.1016/j.strusafe.2009.04.003.
Chang, G A, and John B Mander. (1994). “Seismic Energy Based Fatigue Damage Analysis of Bridge Columns: Part 1 - Evaluation of Seismic Capacity.” NCEER Technical Report No. NCEER-94-0006, 230. https://doi.org/Technical Report NCEER-94-0006. 
Chang, S. E. & Shinozuka, M. (2004). “Measuring improvements in the disaster resilience of communities.” Earthquake Spectra, 20 (3), 739-755.
Cimellaro GP, Arcidiacono V, Reinhorn AM. (2018). “Disaster resilience assessment of building and transportation system.” Journal of Earthquake Engineering https://doi.org/10.1080/13632469.2018.1531090.
Cimellaro GP, Fumo C, Reinhorn AM, Bruneau M. (2009). “Quantification of seismic resilience of health care facilities.” MCEER technical report-MCEER-09-0009. Buffalo (NY): Multidisciplinary center for earthquake engineering research.
Cimellaro, G. P., Reinhorn, A. M., and Bruneau, M. (2006). “Quantification of seismic resilience.” Proc., 8th Nat. Conf. of Earthquake Eng., paper No. 1094, San Francisco, CA.
Cimellaro, Gian Paolo, Andrei M. Reinhorn, and Michel Bruneau. (2010). “Framework for Analytical Quantification of Disaster Resilience.” Engineering Structures 32 (11). Elsevier Ltd: 3639–49. https://doi.org/10.1016/j.engstruct.2010.08.008.
Cornell, C.A., Jalayer, F., Hamburger, R.O., et al. (2002). “The probabilistic basis for the 2000 SAC/FEMA steel moment frame guidelines.” ASCE Journal of structural engineering, 128(4), 526-533.
Corotis RB. (2011) “Conceptual and Analytical Differences between Resiliency and Reliability for Seismic Hazards.” Structural Congress, Reston, VA: American Society of Civil Engineers; 2011, p. 2010–20. doi: 10.1061/41171(401)175.
CSA (Canadian Standards Association). (2009). “Carbon Steel Bars for Concrete Reinforcement.” CSA-G30.18-09, Canada.
CSA (Canadian Standards Association). (2014). “Design of masonry structures.” CSA S304.14, Canada.
Cyrier, W. B. (2012). "Performance of Concrete Masonry Shear Walls with Integral Confined Concrete Boundary Elements", Master Thesis, Washington State University, Washington, USA
Deierlein, G., Reinhorn, M., and Willford, M. (2010). “Nonlinear structural analysis for seismic design.” NIST GCR 10-917-5, National Institute of Standards and Technology, Gaithersburg, MD.
Dhanasekar, M. and Shrive, N. G. (2002). “Strength and Deformation of Confined and Unconfined Grouted Concrete Masonry.” ACI Structural Journal, 99(6), p.819-826.
Drysdale RG, Hamid AA. (1979) “Behaviour of concrete block masonry under axial compression.” ACI J 1979; 76:707–21.
El-Dakhakhni, W., and A. Ashour. (2017). “Seismic response of reinforced concrete masonry shear-wall components and systems: State of the art.” Journal of Structural. Engineering, 143 (9): 03117001. https://doi.org/10.1061/(ASCE)ST .1943-541X.0001840.
Ezzeldin, M., El-Dakhakhni, W., and Weibe, L. (2017). “Experimental assessment of the system level seismic performance of an asymmetrical reinforced concrete block – wall building with boundary elements.” Journal of Structural Engineering, 143(8), 1-13.
Ezzeldin, M., Wiebe, L., and El-Dakhakhni, W. (2016). “Seismic Collapse Risk Assessment of Reinforced Masonry Walls with Boundary Elements Using the FEMA P695 Methodology.” Journal of Structural Engineering, 142(11), 04016108. 
Ezzeldin, M., Wiebe, L., and El-Dakhakhni, W. (2017). “System-Level Seismic Risk Assessment Methodology: Application to Reinforced Masonry Buildings with Boundary Elements.” Journal of Structural Engineering, 143(9), 04017084. 
Federal Emergency Management Agency (FEMA) (2006). “NEHRP Recommended Provisions: Design Examples”, FEMA 451, 2003 Edition, Washington, D.C.
Federal Emergency Management Agency. (2015). “Hazus–MH 2.1: Technical Manual.” National Institute of Building Sciences and Federal Emergency Management Agency (NIBS and FEMA), 718. www.fema.gov/plan/prevent/hazus.
FEMA P695. (2009). “Quantification of Building Seismic Performance Factors.”, Federal Emergency Management Agency, Washington, District of Columbia, USA
FEMA. (2012). “Seismic performance assessment of buildings, volume 1- Methodology.” Rep. No. FEMA P-58-1, Washington, DC.
Filippou F.C., Popov E.P., and Bertero VV. (1983). “Modelling of R/C Joints under Cyclic Excitations.” Journal of Structural Engineering, 109: 2666–2684.
Filippou, F. C., E. P. Popov, and V. V. Bertero. (1983). “Effects of bond deterioration on hysteretic behaviour of reinforced concrete joints. Rep. EERC 83-19.” Berkeley, CA: Earthquake Engineering Research Center, Univ. of California.
Gogus, A. (2010). “Structural wall systems–Nonlinear modelling and collapse assessment of shear walls and slab-column frames.” Ph.D. thesis, Univ. of California, Los Angeles.
Gogus, A., and Wallace, J. W. (2015). “Seismic safety evaluation of reinforced concrete walls through FEMA P695 methodology.” Journal of Structural Engineering, 10.1061/(ASCE)ST.1943-541X.0001221, 04015002.
Hart, G., Noland, J., Kingsley, G., Engle, R., and Sajjad, N. A. (1988). “The Use of Confinement Steel to Increase the Ductility in Reinforced Concrete Masonry Shear Walls.” Masonry Society Journal, 7(2), T19-42.
Heerema, P., Ashour, A., Shedid, M., and El-Dakhakhni, W. (2015). “System-level displacement and performance-based seismic design parameter quantifications for an asymmetrical reinforced concrete masonry building.” Journal of Structural Engineering, https://doi.org/10.1061/(ASCE)ST.1943-541X.0001258
Heerema, P., Shedid, M., Konstantinidis, D., and Dakhakhni, W., (2015). “System-Level Seismic Performance Assessment of an Asymmetrical Reinforced Concrete Blocks hear Wall Building.” Journal of Structural Engineering, 10.1061/(ASCE)ST.1943-541X.0001298.
Hervillard, T., McLean, D., Pollock, D., and McDaniel, C. (2005). “Effectiveness of Polymer Fibers for Improving Ductility in Masonry.” 10th Canadian Masonry Symposium. Banff, Alberta, June 2005.
Hosseinzadeh, S, and Galal, K. (2019). “Seismic Fragility Assessment and Resilience of Reinforced Masonry Flanged Wall Systems.” ASCE Journal of Performance of Constructed Facilities https://doi.org/10.1061/(ASCE)CF.1943-5509.0001383.
Hwang, H. H. M., and J. W. Jaw. (1990). “Probabilistic damage analysis of structures.” Journal of Structural Engineering. 116 (7): 1992–2007. https://doi.org/10.1061 /(ASCE)0733-9445(1990)116:7(1992).
Jain, V. K., Davidson, R. & Rosowsky, D. (2005). “Modelling changes in hurricane risk over time.” Natural Hazards Review, 6(2), 88-96.
Kafali C. & Grigoriu M. (2005). “Rehabilitation decision analysis.” ICOSSAR'OS: Proceedings of the Ninth International Conference on Structural Safety and Reliability. Rome, Italy.
Kolozvari K. (2013). “Analytical Modelling of Cyclic Shear-Flexure Interaction in Reinforced Concrete Structural Walls”, PhD Dissertation, University of California, Los Angeles.
Kolozvari, K., Wallace, J. W., (2016). “Practical Nonlinear Modelling of Reinforced Concrete Structural Walls” Journal of Structural Engineering, DOI: 10.1061/(ASCE)ST.1943-541X.0001492.
Li, J. and Weigel, T. A. (2006). “Damage states for reinforced CMU masonry shear walls.” Advances in Engineering Structures, Mechanics and Construction, 140(2), 111-120.
Lignos, D. G., Krawinkler, H., and Whittaker, A. S. (2011). “Prediction and validation of sideway collapse of two scale models of a 4-storey steel moment frame.” Earthquake Engineering and Structural Dynamics, 40(7), 807–825.
Lu, Y. & Panagiotou, M. (2014). “Three-Dimensional Nonlinear Cyclic Beam-Truss Model for Reinforced Concrete Non-Planar Walls.” Journal of Structural Engineering, 140 (3).
Luco N, Cornell CA. (1998) “Effects of random connection fractures on the demands and reliability for a 3-storey pre-Northridge SMRF structure.” In Proceedings of the sixth US national conference on earthquake engineering, Seattle, Washington; June 1998.
Luu, H., P. Léger, and R. Tremblay. (2013) “Seismic demand of moderately ductile reinforced concrete shear walls subjected to high-frequency ground motions.” Can. J. Civ. Eng. 41 (2): 125–135. https://doi.org/10 .1139/cjce-2013-0073.
Magenes, G., and Calvi, M. (1997). “In-plane seismic response of brick masonry walls.” Earthquake and Engineering and structural dynamics, Vol. 26, 1091-1112
Mander,J. B., Priestley, M.J.N., and Park, R. (1989). “Theoretical stress-strain model for confined concrete.” Journal of Structural Engineering, 114:8(1804), 1804-1826.
Massone, L. M., Orakcal, K., and Wallace, J. W. (2006). “Modelling flexural/shear interaction in RC walls, deformation capacity and shear strength of reinforced concrete members under cyclic loadings.” ACI SP- 236, American Concrete Institute, Farmington Hills, MI, 127–150
Mattock A. H. (1967). Discussion of “Rotational capacity of reinforced concrete beams” by W.G. Corley. J. Struct. Eng., 93(2), 399-412.
Mayes, R. L., Omote, Y. and Clough, R. W. (1976). “Cyclic shear tests of masonry piers Volume 1: Test Results.” Report No. UCB/EERC-76-8, Earthquake Engineering Research Center, University of California Berkeley, USA.
McKenna, F., Fenves, G., and Scott, M. (2013). “Computer program OpenSees: Open system for earthquake engineering simulation.” Pacific Earthquake Engineering Center, Univ. of California, Berkeley, CA.
Menegotto, M., and Pinto, P.E. (1973). “Method of analysis for cyclically loaded R.C. plane frames including changes in geometry and non-elastic behaviour of elements under combined normal force and bending.” In Symposium on the Resistance and Ultimate Deformability of Structures Acted on by Well Defined Repeated Loads, Zurich, Switzerland. International Association for Bridge and Structural Engineering. pp. 15–22.
Michaud, D., and Léger, P. (2014). “Ground motions selection and scaling for nonlinear dynamic analysis of structures located in Eastern North America.” Can. J. Civ. Eng., 41(3), 232–244. https://doi.org/10.1139/cjce-2012-0339.
Millard A. (1993). CEA-LAMBS Report No. 93/007 (Saclay, France, 1993) p. 186.
MJSC (Masonry Standards Joint Committee). (2013). “Building code requirements for masonry structures.” ACI 530/ASCE 5, TMS 402, ASCE, Reston, VA.
Murcia-Delso, J., and Shing, B. (2011). “Fragility curves for in-plane seismic performance of reinforced masonry walls.” Proc., 11th North American Masonry Conference, Minneapolis, Minnesota, Paper #2.04-3.
Nasiri, E., and Liu, Y. (2017). “Development of a detailed 3D FE model for analysis of the in-plane behaviour of masonry infilled concrete frames.” Engineering Structures, http://dx.doi.org/10.1016/j.engstruct.2017.04.049
Nassar, A. A., and Krawinkler, H. (1991). “Seismic Demands for SDOF and MDOF Systems.” Report No. 95, The John A. Blume Earthquake Engineering Centre, Stanford University, California, U.S.A.
NBCC (National Building Code of Canada). (2015) “National building code of Canada”, National research council of Canada. Ottawa: NBCC.
NIST. (2010). “Evaluation of the FEMA P695 methodology for quantification of building seismic performance factors.” NIST GCR 10-917-8, Gaithersburg, MD.
O'Reilly GJ, Perrone D, Fox M, Monteiro R, Filiatrault A. (2018) “Seismic assessment and loss estimation of existing school buildings in Italy.” Engineering Structures 2018; 168:142–62.
Panagiotou, M. & Restrepo, J. I. (2011). “Nonlinear Cyclic Truss Model for Strength Degrading Reinforced Concrete Plane Stress Elements, Report No. UCB/SEMM-2011/01” Structural Engineering, Mechanics and Materials, Department of Civil and Environmental Engineering University of California, Berkeley, 37 pp., February 2011.
Panagiotou, M., and J. I. Restrepo. (2009). “Dual-plastic hinge design concept for reducing higher-mode effects on high-rise cantilever wall buildings.” Earthquake Engineering Structural Dynamics 38 (12): 1359–1380. https://doi.org /10.1002/eqe.905.
Panneton, M., P. Léger, and R. Tremblay. (2006). “Inelastic analysis of a reinforced concrete shear wall building according to the National Building Code of Canada 2005.” Canadian Journal of Civil Engineering 33 (7): 854–871. https://doi.org/10.1139/l06-026.
Pantazopoulou, S., J. (1998). “Detailing for reinforcement stability in RC members.” Journal of Structural Engineering, 124(6), 623-632.
Park, R., and Paulay, T. (1975). “Reinforced concrete structures.” John Wiley and Sons, New York, N.Y.
Park, Y. J. and Ang, A. H. S. (1985). “Mechanistic seismic damage model for reinforced concrete.” Journal of Structural Engineering, 111(4), 722-739.
Paulay T., and Priestley M. J. N. (1992). “Seismic Design of Reinforced Concrete and Masonry Buildings.” John Wiley and Sons, Inc.
Paulay, T. (1988). “Seismic Design in Reinforced Concrete – the State of the Art in New Zealand.” Bulletin of the New Zealand National Society for Earthquake Engineering, 21(3), 208-232.
Paulay, T., and Uzumeri, S. M., (1975). “A Critical Review of the Seismic Design Provisions for Ductile Shear Walls of the Canadian Code and Commentary.” Canadian Journal of Civil Engineering, 2(4), 592-600.
Priestley, M. J. N. (1976). “Cyclic testing of heavily reinforced concrete masonry shear walls.” Research Report 76-12, Department of Civil Engineering, University of Canterbury, Christchurch, New Zealand.
Priestley, M. J. N. (2000). “Performance-based seismic design” Keynote Address, Proceedings of the Twelfth World Conference on Earthquake Engineering. Earthquake Engineering Research Institute, Auckland, New Zealand, Paper #2831.
Priestley, M. J. N. and Elder, D. M. (1983). “Stress-strain curves for unconfined and confined concrete masonry.” ACI Journal, 80(3), 192-201.
Priestley, M. J. N., and Elder, D. M. (1982). “Cyclic loading tests of slender concrete masonry shear walls.” Bulletin of the New Zealand National Society for Earthquake Engineering, 15(1), 3–21.
Priestley, M. J. N., and Kowalsky, M. J. (1998). “Aspects of drift and ductility capacity of rectangular cantilever structural walls.” Bulletin of the New Zealand National Society for Earthquake Engineering, 31(2), 73-75.
Priestley, M. J. N., G. M. Calvi, and M. J. Kowalsky. (2007). “Displacement based seismic design of structures.” Pavia, Italy: IUSS.
Priestley, M., J., N. and Bridgeman, D., O. (1974). “Seismic resistance of brick masonry walls.” Bulletin of the New Zealand National Society for Earthquake Engineering, 7(4), 167-187.
Priestley, M.J.N., and Elder, D.M. (1982). “Stress-Strain Curves for Unconfined and Confined Concrete Masonry.” ACI Journal, 80(3), 192-201.
Priestly, M. J. N., Calvi, G. M. & Kowalsky, M. J. (2007). “Displacement-Based Seismic Design of Structures.” Pavia, IUSS Press.
Purba, R., and Bruneau, M. (2015). “Seismic Performance of Steel Plate Shear Walls Considering Two Different Design Philosophies of Infill Plates. I: Deterioration Model Development.” Journal of Structural Engineering, 141(6), 4014160.
RS Means. (2019). “Yardsticks for costing 2019: Canadian construction cost data”, Robert S Means, Norwell, 158–163.
Samadian, D., Ghafory-Ashtiany, M., Naderpour, H., Eghbali, M. (2019) “Seismic resilience evaluation based on vulnerability curves for existing and retrofitted typical RC school buildings”, Soil Dynamics and Earthquake Engineering, https://doi.org/10.1016/j.soildyn.2019.105844
Scott, B. D., R. Park, and M. J. N. Priestley. (1982). “Stress-strain behaviour of concrete confined by overlapping hoops at low and high strain rates.” J. Am. Concr. Inst. 79 (1): 13–27.
SeismoSoft, (2016). “SeismoStruct - A computer program for static and dynamic nonlinear analysis of framed structures”, V 2016, available from URL: www.seismosoft.com.
Shedid, M. T. (2009). “Ductility of concrete block shear wall structures.” Ph.D. Thesis, McMaster University, Hamilton, Canada.
Shedid, M. T., Drysdale, R. G. and El-Dakhakhni, W. W. (2008). “Behaviour of fully grouted reinforced concrete masonry shear walls failing in flexure: experimental results.” Journal of Structural Engineering, 134(11), 1754-1767.
Shedid, M., El-Dakhakhni, W., and Drysdale, R. (2010a). “Alternative strategies to enhance the seismic performance of reinforced concrete-block shear wall systems.” Journal of Structural Engineering, 136(6), 676–689. 
Shedid, M., El-Dakhakhni, W., and Drysdale, R. (2010b). “Characteristics of rectangular, flanged, and end-confined reinforced concrete masonry shear walls for seismic design.” Journal of Structural Engineering, 136(12), 1471–1482.  
Shibata, A. and Sozen M. A. (1974). “The Substitute Structure Method for Earthquake-resistant Design of Reinforced Concrete Frames.” University of Illinois at Urbana-Champaign, U.S.A.
Shing, P. B., Noland, J. L., Klamerus, E., & Spaeh, H. (1989). “Inelastic Behaviour of Concrete Masonry Shear Walls”. ASCE Journal of Structural Engineering, 2204-2224.
Siyam, M. A., D. Konstantinidis, and W. El-Dakhakhni. (2016). “Collapse fragility evaluation of ductile reinforced concrete block wall systems for seismic risk assessment.” Journal of Performance of Constructed Facilities. 30 (6): 04016047. https://doi.org/10.1061/(ASCE)CF.1943-5509.0000895.
Snook, M. (2005). “Effects of Confinement Reinforcement on the Performance of Masonry Shear Walls.” M.S. Thesis, Department of Civil and Environmental Engineering, Washington State University, Pullman, WA.
Stavridis, A., and Shing, P. B. (2010). “Finite-element modelling of nonlinear behaviour of masonry-infilled RC frames” Journal of Structural. Engineering, 10.1061/(ASCE)ST.1943-541X.116, 285–296.
Structural Engineers Association of California (SEAOC). (1995). “Vision 2000: Performance-Based Seismic Engineering of Buildings.” Structural Engineers Association of California, Sacramento, US, 1995.
Thomsen, J. H., and Wallace, J. W. (1995). “Displacement-based design of reinforced concrete structural walls: An experimental investigation of walls with rectangular and T-shaped cross sections.” Rep. No. CU/CEE-95/06, Dept. of Civil Engineering, Clarkson Univ., Potsdam, NY.
Tirca, L., O. Serban, L. Lin, M. Wang, and N. Lin. (2016). “Improving the seismic resilience of existing braced-frame office buildings.” Journal of Structural Engineering 142 (8): C4015003. https://doi.org/10.1061/(ASCE)ST.1943-541X.0001302.
Vamvatsikos, D., and Cornell, A. (2002). “Incremental dynamic analysis.” Earthquake Engineering Structural Dynamics, 31(3), 491–514.
Vulcano, A., Bertero, V. V., & Colotti, V. (1988). “Analytical modelling of RC structural walls.” In Proceedings of the 9th World Conference on Earthquake Engineering (Vol. 6, pp. 41-46).
Wallace, J. W., Elwood, K. J., and Massone, L. M. (2008). “Investigation of the Axial Load Capacity for Lightly Reinforced Wall Piers.” Journal of Structural Engineering, 10.1061/(ASCE)0733-9445(2008)134:9(1548), 1548–1557.
Wang, F.L., Zhang, X.C., Zhu, F. (2016). "Research progress and low-carbon property of reinforced concrete block masonry structures in China." 16th International Brick and Block Masonry Conference. Padova, Italy. Taylor & Francis Group, London.
Wen, Y.K., Ellingwood, B. R., Bracci, J. (2004). “Vulnerability function framework for consequence-based engineering.” MAE Center Project DS-4 Report.
Wiebe, L., and C. Christopoulos. (2009). “Mitigation of higher mode effects in base-rocking systems by using multiple rocking sections.” Supplement, J. Earthquake Eng. 13 (S1): 83–108. https://doi.org/10 .1080/13632460902813315.
Wyllie, L.A., Abrahamson, N., Bolt, B., Castro, G., and Durkin, M. E. (1986). “The Chile Earthquake of March 3, 1985- Performance of Structures.” Earthquake Spectra, 2(2), 93-371.
Yassin, M. H. M. (1994). “Nonlinear analysis of prestressed concrete structures under monotonic and cyclic loads.” Ph.D. dissertation, Univ. of California, Berkeley, CA.
Zhao, J, and S Sritharan. (2007). “Modelling of Strain Penetration Effects in Fibre-Based Analysis of Reinforced Concrete Structures.” ACI Structural Journal 104 (2): 133–141. https://doi.org/10.14359/18525.
Zong, Z., and Kunnath, S. (2008). “Buckling of reinforcing bars in concrete structures under seismic loads.” 14th World Conf. on Earthquake Engineering, International Association for Earthquake Engineering, Tokyo.