[1] Sunpreet Singh et al. “Current status and future directions of fused filament fabrication”. In: Journal of Manufacturing Processes 55 (2020), pp. 288–306.
[2] Amit Bandyopadhyay and Susmita Bose. Additive manufacturing. CRC press, 2019.
[3] Ian Gibson et al. Additive manufacturing technologies. Vol. 17. Springer, 2014.
[4] Amit Bandyopadhyay and Bryan Heer. “Additive manufacturing of multi-material structures”. In: Materials Science and Engineering: R: Reports 129 (2018), pp. 1–16.
[5] Praveen Sreeramagiri et al. “Design and development of a high-performance Nbased superalloy WSU 150 for additive manufacturing”. In: Journal of Materials Science & Technology 47 (2020), pp. 20–28.
[6] Zhenzhen Quan et al. “Additive manufacturing of multi-directional preforms for composites: opportunities and challenges”. In: Materials Today 18.9 (2015), pp. 503–512.
[7] Taban Larimian and Tushar Borkar. “Additive manufacturing of in situ metal matrix composites”. In: Additive Manufacturing of Emerging Materials. Springer, 2019, pp. 1–28.
[8] Sasan Dadbakhsh et al. “Selective laser melting to manufacture “in situ” metal matrix composites: a review”. In: Advanced Engineering Materials 21.3 (2019), p. 1801244.
[9] Nicholas Meisel and Christopher Williams. “An investigation of key design for additive manufacturing constraints in multimaterial three-dimensional printing”. In: Journal of Mechanical Design 137.11 (2015).
[10] Skylar Tibbits. “4D printing: multi-material shape change”. In: Architectural Design 84.1 (2014), pp. 116–121.
[11] Konstantinos Salonitis et al. “Multifunctional materials used in automotive industry: A critical review”. In: Engineering Against Fracture. Springer, 2009, pp. 59–70.
[12] Micaela Ribeiro, Olga Sousa Carneiro, and Alexandre Ferreira da Silva. “Interface geometries in 3D multi-material prints by fused filament fabrication”. In: Rapid Prototyping Journal 25.1 (2019), pp. 38–46. DOI: 10.1108/RPJ-05-2017-0107.
[13] Suong Van Hoa, Minh Duc Hoang, and Jeff Simpson. “Manufacturing procedure to make flat thermoplastic composite laminates by automated fibre placement and their mechanical properties”. In: Journal of Thermoplastic Composite Materials 30.12
(2017), pp. 1693–1712.
[14] Yasir Nawab, Syed Talha Ali Hamdani, and Khubab Shaker. Structural textile design: interlacing and interlooping. CRC Press, 2017.
[15] Huachao Mao et al. “Adaptive slicing based on efficient profile analysis”. In: Computer-Aided Design 107 (2019), pp. 89–101.
[16] Pu Huang, Charlie C. L. Wang, and Yong Chen. “Algorithms for layered manufacturing in image space", Book Chapter, ASME Advances in Computers and Information in Engineering Research”. In: ASME Advances in Computers and Information
in Engineering Research (2014).
[17] Yong Chen and Charlie C. L. Wang. “Regulating complex geometries using layered depth-normal images for rapid prototyping and manufacturing”. In: Rapid Prototyping Journal 19.4 (2013), pp. 253–268.
[18] Mohammad Vaezi et al. “Multiple material additive manufacturing–Part 1: a review”. In: Virtual and Physical Prototyping 8.1 (2013), pp. 19–50.
[19] Pitchaya Sitthi-Amorn et al. “MultiFab: a machine vision assisted platform for multi-material 3D printing”. In: ACM Transactions on Graphics (TOG) 34.4 (2015), pp. 1–11.
[20] Ali Gokhan Demir and Barbara Previtali. “Multi-material selective laser melting of Fe/Al-12Si components”. In: Manufacturing Letters 11 (2017), pp. 8 –11. DOI:
10.1016/j.mfglet.2017.01.002.
[21] Christopher-Denny Matte et al. “Automated storage and active cleaning for multimaterial digital-light-processing printer”. In: Rapid Prototyping Journal 25.5 (2019), pp. 864 –874. DOI: 10.1108/RPJ-08-2018-0211.
[22] RE Brennan et al. “Fabrication of electroceramic components by layered manufacturing (LM)”. In: Ferroelectrics 293.1 (2003), pp. 3–17.
[23] Devin J Roach et al. “The m4 3D printer: A multi-material multi-method additive manufacturing platform for future 3D printed structures”. In: Additive Manufacturing 29 (2019), p. 100819.
[24] David Espalin et al. “Multi-material, multi-technology FDM: exploring build process variations”. In: Rapid Prototyping Journal (2014).
[25] Dongping Deng, Tsz-Ho Kwok, and Yong Chen. “Four-Dimensional Printing: Design and Fabrication of Smooth Curved Surface Using Controlled Self-Folding”. In: Journal of Mechanical Design 139.8 (June 2017). 081702. DOI: 10.1115/1.4036996.
[26] Rouhollah D Farahani, Martine Dubé, and Daniel Therriault. “Three-dimensional printing of multifunctional nanocomposites: manufacturing techniques and applications”. In: Advanced materials 28.28 (2016), pp. 5794–5821.
[27] J Schweiger et al. “Histo-anatomic 3D printing of dental structures”. In: British dental journal 221.9 (2016), pp. 555–560.
[28] Susmita Bose, Sahar Vahabzadeh, and Amit Bandyopadhyay. “Bone tissue engineering using 3D printing”. In: Materials today 16.12 (2013), pp. 496–504.
[29] Gianni Campoli et al. “Mechanical properties of open-cell metallic biomaterials manufactured using additive manufacturing”. In: Materials & Design 49 (2013), pp. 957–965.
[30] Furqan A Shah et al. “Long-term osseointegration of 3D printed CoCr constructs with an interconnected open-pore architecture prepared by electron beam melting”.In: Acta biomaterialia 36 (2016), pp. 296–309.
[31] Amir A Zadpoor and Jos Malda. Additive manufacturing of biomaterials, tissues, and organs. 2017.
[32] Wei Gao et al. “The status, challenges, and future of additive manufacturing in engineering”. In: Computer-Aided Design 69 (2015), pp. 65–89.
[33] Erina Baynojir Joyee and Yayue Pan. “Multi-material additive manufacturing of functional soft robot”. In: Procedia Manufacturing 34 (2019), pp. 566–573.
[34] Arijit Ghosh et al. “Stimuli-responsive soft untethered grippers for drug delivery and robotic surgery”. In: Frontiers in Mechanical Engineering 3 (2017), p. 7. 
[35] A Muguruza et al. “Development of a multi-material additive manufacturing process for electronic devices”. In: Procedia Manufacturing 13 (2017), pp. 746–753.
[36] Xiao Kuang et al. “Advances in 4D printing: materials and applications”. In: Advanced Functional Materials 29.2 (2019), p. 1805290.
[37] Farhang Momeni, Xun Liu, Jun Ni, et al. “A review of 4D printing”. In: Materials & design 122 (2017), pp. 42–79.
[38] Arash Afshar and Roy Wood. “Development of Weather-Resistant 3D Printed Structures by Multi-Material Additive Manufacturing”. In: Journal of Composites Science 4.3 (2020), p. 94.
[39] Ryosuke Matsuzaki, Takuya Kanatani, and Akira Todoroki. “Multi-material additive manufacturing of polymers and metals using fused filament fabrication and electroforming”. In: Additive Manufacturing 29 (2019), p. 100812.
[40] Joel C Najmon, Sajjad Raeisi, and Andres Tovar. “Review of additive manufacturing technologies and applications in the aerospace industry”. In: Additive manufacturing for the aerospace industry (2019), pp. 7–31.
[41] Daehoon Han and Howon Lee. “Recent advances in multi-material additive manufacturing: methods and applications”. In: Current Opinion in Chemical Engineering 28 (2020), pp. 158–166.
[42] Adeyemi Oladapo Aremu et al. “A voxel-based method of constructing and skinning conformal and functionally graded lattice structures suitable for additive manufacturing”. In: Additive Manufacturing 13 (2017), pp. 1–13.
[43] Sambit Ghadai, Anushrut Jignasu, and Adarsh Krishnamurthy. “Direct 3D Printing of Multi-level Voxel Models”. In: Additive Manufacturing (2021), p. 101929. 
[44] Mark W Jones, J Andreas Baerentzen, and Milos Sramek. “3D distance fields: A survey of techniques and applications”. In: IEEE Transactions on Visualization and Computer Graphics 12.4 (2006), pp. 581–599.
[45] Yuen-Shan Leung et al. “Digital Material Design Using Tensor-Based Error Diffusion for Additive Manufacturing”. In: Computer-Aided Design 114 (2019), pp. 224–235. DOI: 10.1016/j.cad.2019.05.031.
[46] William Oropallo and Les A Piegl. “Ten challenges in 3D printing”. In: Engineering with Computers 32.1 (2016), pp. 135–148.
[47] Pierre Muller, Jean-Yves Hascoet, and Pascal Mognol. “Toolpaths for additive manufacturing of functionally graded materials (FGM) parts”. In: Rapid Prototyping Journal (2014).
[48] Xiuzhi Qu and NoshirALangrana. “A System Approach in Extrusion-Based Multi-Material CAD 313”. In: International Solid Freeform Fabrication Symposium. 2001.
[49] Charlie CL Wang and Yong Chen. “Layered depth-normal images: A sparse implicit representation of solid models”. In: arXiv preprint arXiv:1009.0794 (2010).
[50] Tsz-Ho Kwok. “Comparing Slicing Technologies for Digital Light Processing Printing”. In: Journal of Computing and Information Science in Engineering 19.4 (2019).
[51] Bruno Heidelberger, Matthias Teschner, and Markus Gross. “Real-time volumetric intersections of deforming objects”. In: Vision, modeling, and visualization 2003.AKA. 2003, pp. 461–468.
[52] Fang Liu et al. “Freepipe: a programmable parallel rendering architecture for efficient multi-fragment effects”. In: Proceedings of the 2010 ACM SIGGRAPH symposium on Interactive 3D Graphics and Games. 2010, pp. 75–82.