Anon 2021. FEMA P-58. [online] Available at: <https://femap58.atcouncil.org/> [Accessed 8 Mar. 2021].
Anon 2021. Sensequake Larzé. [online] Available at: <https://www.sensequake.com/larze> [Accessed 9 Jan. 2021].
Atkinson, G.M. and Goda, K., 2011. Effects of seismicity models and new ground-motion prediction equations on seismic hazard assessment for four Canadian cities. Bulletin of the Seismological Society of America, 101(1), pp.176–189.
Bagchi, A., 2005. Updating the mathematical model of a structure using vibration data. Journal of Vibration and Control, 11(12), pp.1469–1486.
Bahmanoo, S., Bagchi, S., Sabamehr, A. and Bagchi, A., 2021. Seismic loss analysis of Buildings using sensor-based measurements. 10th International Conference on Structural Health Monitoring of Intelligent Infrastructure. Porto, Portugal.
Bahmanoo, S., Valinejadshoubi, M., Sabamehr, A., Bagchi, A. and Bagchi, S., 2019. Enhancing the efficiency of structural condition assessment by integrating building information modeling (BIM) into vibration-based damage identification (VBDI). Proceedings of the 12th International Workshop on Structural Health Monitoring. .
BIMForum, 2020. LOD Spec.
Calvi, G.M., Sullivan, T. and Welch, D., 2014. A seismic performance classification framework to provide increased seismic resilience. In: Perspectives on European earthquake engineering and seismology. Springer, Cham.pp.361–400.
Çelebi, M., Sanli, A., Sinclair, M., Gallant, S. and Radulescu, D., 2003. Real-Time seismic monitoring needs of a building owner and the solution. Proceedings of 1st International Conference on Structural Health Monitoring and Intelligent Infrastructure, Tokyo, Japan, AA Balkema. pp.1011–1016.
Charette, R.P. and Marshall, H.E., 1999. UNIFORMAT II elemental classification for building specifications, cost estimating, and cost analysis. US Department of Commerce, Technology Administration, National Institute of ….
Christodoulou, S.E., Vamvatsikos, D. and Georgiou, C., 2010. A BIM-based framework for forecasting and visualizing seismic damage, cost and time to repair. In: 8th European Conference on Product and Process Modelling (ECCPM), Cork, Ireland.
Cimellaro, G.P., Reinhorn, A.M. and Bruneau, M., 2006. Quantification of seismic resilience. Proceedings of the 8th US National conference on Earthquake Engineering. pp.1–10.
Council, B.S.S., 1997. NEHRP guidelines for the seismic rehabilitation of buildings. FEMA-273, Federal Emergency Management Agency, Washington, DC, pp.2–12.
Cremen, G. and Baker, J.W., 2018. Quantifying the benefits of building instruments to FEMA P-58 rapid post-earthquake damage and loss predictions. Engineering Structures, 176, pp.243–253.
Eastman, C.M., Eastman, C., Teicholz, P., Sacks, R. and Liston, K., 2011. BIM handbook: A guide to building information modeling for owners, managers, designers, engineers and contractors. John Wiley & Sons.
Extractor, Art., 1999. Structural vibration solutions. Aalborg, Denmark.
Fajfar, P. and Krawinkler, H., 2004. Performance-based seismic design concepts and implementation. Proceedings of the International Workshop, Bled, Slovenia. pp.2004–05.
FEMA, 2012. Seismic Performance Assessment of Buildings Volume 1-Methodology. Rep. No. FEMA P-58-1. Federal Emergency Management Agency, Washington.
Filiatrault, A. and Sullivan, T., 2014. Performance-based seismic design of nonstructural building components: The next frontier of earthquake engineering. Earthquake Engineering and Engineering Vibration, 13(1), pp.17–46.
Fischinger, M., 2014. Performance-based seismic engineering: Vision for an earthquake resilient society. Springer.
Gulati, B., 2006. Earthquake risk assessment of buildings: applicability of HAZUS in Dehradun, India. ITC Enschede.
Günay, S. and Mosalam, K.M., 2013. PEER performance-based earthquake engineering methodology, revisited. Journal of Earthquake Engineering, 17(6), pp.829–858.
Hamburger, R., 2014. FEMA P-58 seismic performance assessment of buildings. Proc., 10th National Conf. in Earthquake Engineering, Earthquake Engineering Research Institute, Anchorage, AK. .
Hazus, 2020. HAZUS 4.2 SP3: Hazus Earthquake Model Technical Manual.
Hazus, M.H., 2011. Multi-hazard loss estimation methodology: earthquake model hazus-MH MR5 technical manual.
Hong, Y., Hammad, A.W. and Akbarnezhad, A., 2019. Forecasting the net costs to organisations of Building Information Modelling (BIM) implementation at different levels of development (LOD). ITcon, 24, pp.588–603.
Hwang, S.-H. and Lignos, D.G., 2018. Nonmodel-based framework for rapid seismic risk and loss assessment of instrumented steel buildings. Engineering Structures, 156, pp.417–432.
Jin, Z. and Gambatese, J., 2019. Bim for temporary structures: Development of a revit api plug-in for concrete formwork. In: Proceedings of the CSCE Annual Conference Growing with Youth, Laval, QC, Canada. pp.12–15.
Kensek, K., 2014. Integration of Environmental Sensors with BIM: case studies using Arduino, Dynamo, and the Revit API.
Kolarić, S., Mandičák, T., Vukomanović, M. and Mesároš, P., 2018. BIM training in construction management educational practices in Croatia and Slovakia. Creative Construction Conference 2018. Budapest University of Technology and Economics.pp.1002–1009.
Lee, T.-H., 2005. Probabilistic seismic evaluation of reinforced concrete structural components and systems. University of California, Berkeley.
Lim, C., 2016. Application of vibration-based techniques for modal identification and damage detection in structures.
Lu, X. and Guan, H., 2017. Earthquake disaster simulation of civil infrastructures. Springer.
Mewis, R., 2019. Building Construction Costs With RSMeans Data 2020. Means Building Construction Cost Data. [online] Gordian Group Incorporated. Available at: <https://books.google.ca/books?id=6fJSzAEACAAJ>.
Mirshafiei, F., 2016. A novel three-dimensional seismic assessment method (3D-SAM) for buildings based on ambient vibration testing. McGill University (Canada).
NATSPEC, 2013. Natspec bim paper nbp 001 bim and lod - building information modelling and level of development. [online] Available at: <https://bim.natspec.org/images/NATSPEC_Documents/NATSPEC_BIM_LOD_Paper_131115.pdf>.
Oti, A.H., Tizani, W., Abanda, F., Jaly-Zada, A. and Tah, J., 2016. Structural sustainability appraisal in BIM. Automation in Construction, 69, pp.44–58.
Parrott, B.C. and Bomba, M.B., 2010. delivery and building information modeling. PCI journal.
Perrone, D. and Filiatrault, A., 2017. Automated seismic design of non-structural elements with building information modelling. Automation in construction, 84, pp.166–175.
Ploeger, S., Atkinson, G. and Samson, C., 2010. Applying the HAZUS-MH software tool to assess seismic risk in downtown Ottawa, Canada. Natural hazards, 53(1), pp.1–20.
Porter, K., Mitrani‐Reiser, J. and Beck, J.L., 2006. Near‐real‐time loss estimation for instrumented buildings. The Structural Design of Tall and Special Buildings, 15(1), pp.3–20.
Porter, K.A., 2003. An overview of PEER’s performance-based earthquake engineering methodology. Proceedings of ninth international conference on applications of statistics and probability in civil engineering. pp.1–8.
Porter, K.A., Beck, J.L. and Shaikhutdinov, R.V., 2002. Sensitivity of building loss estimates to major uncertain variables. Earthquake Spectra, 18(4), pp.719–743.
Ranjbar, P.R. and Naderpour, H., 2020. Probabilistic evaluation of seismic resilience for typical vital buildings in terms of vulnerability curves. Structures. Elsevier.pp.314–323.
Ren, W.-X. and Chen, H.-B., 2010. Finite element model updating in structural dynamics by using the response surface method. Engineering structures, 32(8), pp.2455–2465.
Sabamehr, A., 2018. Development of Efficient Vibration-based Techniques for Structural Health Monitoring. PhD dissertation. Concordia University.
Standard, I., 2010. ISO 29481-1: 2010 (E): Building Information Modeling-Information Delivery Manual-Part 1: Methodology and Format.
Timir Baran Roy, Bagchi, S., Sabamehr, A. and Bagchi, A., 2019. Operational modal analysis of Concordia university EV building using ambient vibration response. Proceeding of the 7th International Congress on Computational Mechanics and Simulation. India.
Uma, S., 2007. Seismic Instrumentation of Buildings-A promising step for performance based design in New Zealand. NZSEE conference proceedings. .
Valinejadshoubi, M., Bagchi, A. and Moselhi, O., 2019. Development of a BIM-based data management system for structural health monitoring with application to modular buildings: Case study. Journal of Computing in Civil Engineering, 33(3), p.05019003.
Wang, Y., Pejmanfar, S. and Tirca, L., 2019. Intensity-based performance assessment of middle-rise steel office buildings. Proceedings of the 12th Canadian Conference on Earthquake Engineering. Quebec.
Xu, X., Ma, L. and Ding, L., 2014. A framework for BIM-enabled life-cycle information management of construction project. International Journal of Advanced Robotic Systems, 11(8), p.126.
Xu, Z., Lu, X., Zeng, X., Xu, Y. and Li, Y., 2019a. Seismic loss assessment for buildings with various-LOD BIM data. Advanced Engineering Informatics, 39, pp.112–126.
Xu, Z., Zhang, H., Lu, X., Xu, Y., Zhang, Z. and Li, Y., 2019b. A prediction method of building seismic loss based on BIM and FEMA P-58. Automation in Construction, 102, pp.245–257.
Yang, T., Moehle, J., Stojadinovic, B. and Der Kiureghian, A., 2009. Seismic performance evaluation of facilities: Methodology and implementation. Journal of Structural Engineering, 135(10), pp.1146–1154.
Yang, X., Koehl, M. and Grussenmeyer, P., 2018. Automating Parametric Modelling From Reality-Based Data by Revit API Development.