Abrahamson, N. A., and Silva, W. J. (1997). “Empirical response spectral attenuation relations for shallow crustal earthquakes.” Seismological Research Letters, 68(1), 94–109.

Aiken, I. D., Kelly, J. M., and Pall, A. (1988). “Seismic response of a nine-story steel frame with friction damped cross-bracing.” 9th World Conference Earthquake Engineering, Tokyo, Japan.

ASCE. (2000). Minimum design loads for buildings and other structures. ANSI/ASCE Standard.

ASCE. (2013). ASCE 41-13 - Seismic Evaluation and Retrofit of Existing Buildings. American Society of Civil Engineers.

Astaneh-Asl, A. (1998). Seismic behavior and design of gusset plates for braced frames. Structural Steel Educational Council - Technical Information & Product Service.

Atkinson, G. M., and Goda, K. (2011). “Effects of seismicity models and new ground-motion prediction equations on seismic hazard assessment for four Canadian cities.” Bulletin of the Seismological Society of America, 101(1), 176–189.

Baker, J. W., and Cornell, A. (2006). “Spectral shape, epsilon and record selection.” Earthquake Engineering and Structural Dynamics, 35, 1077–1095.

Baker, J. W., and Cornell, C. A. (2005). “A vector-valued ground motion intensity measure consisting of spectral acceleration and epsilon.” Earthquake Engineering and Structural Dynamics, 34(10), 1193–1217.

Balazic, J., Guruswamy, G., Elliot, J., Pall, R. T., and Pall, A. (2011). “Seismic Rehabilitation of Justice Headquarters Building Ottawa , Canada.” 12th World Conference on Earthquake Engineering, 1–8.

Bertero, V. (1977). “Strength and deformation capacities of buildings under extreme environments.” Structural Engineering and Structural Mechanics, 211–215.

Bosco, M., and Tirca, L. (2017). “Numerical simulation of steel I-shaped beams using a fiber-based damage accumulation model.” Journal of Constructional Steel Research, Elsevier Ltd, 133, 241–255.

Bowden, F. P., and Tabor, D. (2001). The Friction and Lubrication of Solids. Oxford University Press.

Bruneau, M., and MacRae, G. (2017). A Seismic Shift in Building Structural Systems: Reconstructing Christchurch.

Chopra, A. K. (2012). Dynamics of structures : theory and applications to earthquake engineering. Pearson.

Clifton, C., Bruneau, M., Macrae, G., Leon, R., and Fussell, A. (2011). “Steel Building Damage from the Christchurch Earthquake Series of 2010/2011.” Journal of the Structural Engineering Society New Zealand Inc., 24(2).
CSA S16. (2014). S16-14 - Design of Steel Structures. Canadian Standards Association.

Ellington, B. R., Celik, O. C., and Kinali, K. (2007). “Fragility assessment of building structural systems in Mid-America.” Earthquake 
Engineering and Structural Dynamics, 36(13), 1–6.

Erochko, J., Christopoulos, C., Tremblay, R., and Choi, H. (2011). “Residual Drift Response of SMRFs and BRB Frames in Steel Buildings Designed according to ASCE 7-05.” Journal of Structural Engineering, 137(5), 589–599.

FEMA. (2000). FEMA 356 Prestandard and commentary for the seismic rehabilitation of buildings.

FEMA. (2003). FEMA 450. NEHRP Recomended Provisions for Seismic Regulations for New Buildings and Other Structures.

FEMA. (2009). Quantification of building seismic performance factors. FEMA P695, Washington, DC.

Filiatrault, A. (1985). “Performance and Evaluation of Friction Damped Braced Frames under Simulated Earthquake Loads.” University of British Columbia.

Filiatrault, A., Tremblay, R., and Kar, R. (2000). “Performance Evaluation of Friction Spring Seismic Damper.” Journal of Structural Engineering, 126(4), 491–499.

Fitzgerald, T. F., Anagnos, T., Goodson, M., and Zsutty, T. (1989). “Slotted Bolted Connections in Aseismic Design for Concentrically Braced Connections.” Earthquake Spectra, 5(2).

Giberson, M. F. (1969). “Two Nonlinear Beams With Definitions of Ductility.” Journal of the Structural Division, American Society of Civil Engineers, 95(2), 137–157.

Jaisee, S., Yue, F., and Ooi, Y. H. (2021). “A state-of-the-art review on passive friction dampers and their applications.” Engineering Structures, Elsevier, 235, 112022.

Ji, X., Kato, M., Wang, T., Hitaka, T., and Nakashima, M. (2009). “Effect of gravity columns on mitigation of drift concentration for braced frames.” Journal of Constructional Steel Research, Elsevier Ltd, 65(12), 2148–2156.

Joyner, W. B., and Boore, D. M. (1981). “Peak horizontal acceleration and velocity from strong-motion records including records from the 1979 imperial valley, California, earthquake.” Bulletin of the Seismological Society of America, 71(6), 2011–2038.

Kiggins, S., and Uang, C. M. (2006). “Reducing residual drift of buckling-restrained braced frames as a dual system.” Engineering Structures, 28(11), 1525–1532.

Lignos, D. G., Asce, A. M., Krawinkler, H., and Asce, M. (2011). “Deterioration Modeling of Steel Components in Support of Collapse Prediction of Steel Moment Frames under Earthquake Loading.”

Ludema, K. C., Arbor, A., Carlisle, S., and Schwartz, S. (1997). Friction, wear, lubrication: a textbook in tribology. Choice Reviews Online.

Lukkunaprasit, P., Wanitkorkul, A., and Filiatrault, A. (2004). “Performance Deterioration of Slotted-Bolted Connection Due to Bolt Impact and Remedy by Restrainers.” 13th World Conference on Earthquake Engineering.

Macrae, G. A., Kimura, Y., and Roeder, C. (2004). “Effect of Column Stiffness on Braced Frame Seismic Behavior.” Journal of Structural Engineering, 130(3), 381–391.

McCormick, J., Aburano, H., Ikenaga, M., and Nakashima, M. (2008). “Permissible Residual Deformation Levels for Building Structures Considering both Safety and Human Elements.” The 14th World Conference on Earthquake Engineering, 8.

Morales, J. D. (2011). “Numerical Simulations of Steel Frames Equipped with Friction-Damped Diagonal- Bracing Devices.” Concordia University, Montreal, Canada.

National Research Council Canada. (2015). “NBCC 2015.” Government of Canada.

NEHRP. (2010). Evaluation of the FEMA P-695 Methodology for Quantification of Building Seismic Performance Factors NEHRP Consultants Joint Venture A partnership of the Applied Technology Council and the Consortium of Universities for Research in 
Earthquake Engineering.

Nims, D. K., Richter, P. J., and Bachman, R. E. (1993). “The use of the energy dissipating restraint for seismic hazard mitigation.” Earthquake Spectra, SAGE PublicationsSage UK: London, England, 9(3), 467–489.

Ohira, M. (2020). “Effects of Connections Detailing and Friction Dissipation Devices on the Seismic Response of a Hospital Steel Braced Frame Building.” Concordia University, Montreal, Quebec, Canada.

Pall, A. S., and Marsh, C. (1982). “Response of Friction Damped Braced Frames.” Journal of the Structural Division, American Society of Civil Engineers, 108(6), 1313–1323.

Pall, A. S., Marsh, C., and Fazio, P. (1980). “Friction joints for seismic control of large panel structures.” Journal - Prestressed Concrete Institute, 25(6), 38–61.

Pasquin, C., Leboeuf, N., and Pall, T. (2004). “Friction dampers for seismic rehabilitation of Eaton Building, Montreal.” 13th World Conference on Earthquake Engineering, Vancouver, BC, Canada.

PEER/ATC 72-1. (2010). Modeling and acceptance criteria for seismic design and analysis of tall buildings. Applied Technology Council, Redwood City, CA.

Pettinga, D., Christopoulos, C., Pampanin, S., and Priestley, N. (2007). “Effectiveness of simple approaches in mitigating residual deformations in buildings.” Earthquake Engineering & Structural Dynamics, John Wiley & Sons, Ltd, 36(12), 1763–1783.

Qing, C., and Driver, R. G. (2008). End tear-out failures of bolted tension members. University of Alberta.

Ribeiro, F. L. A., Barbosa, A. R., Asce, M., Scott, M. H., and Neves, L. C. (2015). “Deterioration Modeling of Steel Moment Resisting Frames Using Finite-Length Plastic Hinge Force-Based Beam-Column Elements.” Journal of Structural Engineering, 141(2).

Roik, K., Dorka, U., and Dechent, P. (1988). “Vibration control of structures under earthquake loading by three‐stage friction‐grip elements.” Earthquake Engineering & Structural Dynamics, 16(4), 501–521.

Sahoo, D. R., and Chao, S.-H. (2015). “Stiffness-Based Design for Mitigation of Residual Displacements of Buckling-Restrained Braced Frames.” Journal of Structural Engineering, 141(9), 04014229.

Scott, M. H., and Ryan, K. L. (2013). “Moment-Rotation Behavior of Force-Based Plastic Hinge Elements.” Earthquake Spectra, 29(2), 597–607.

Song, J., and Der Kiureghian, A. (2006). “Generalized Bouc–Wen Model for Highly Asymmetric Hysteresis.” Journal of Engineering Mechanics, 132(6), 610–618.

Symans, M. D., Charney, F. A., Whittaker, A. S., Constantinou, M. C., Kircher, C. A., Johnson, M. W., and McNamara, R. J. (2008). “Energy Dissipation Systems for Seismic Applications: Current Practice and Recent Developments.” Journal of Structural Engineering, 134(1), 3–21.

Tirca, L., Serban, O., Lin, L., Wang, M., and Lin, N. (2016). “Improving the Seismic Resilience of Existing Braced-Frame Office Buildings.” Journal of Structural Engineering, 142(8), 1–14.

Tirca, L., Serban, O., Tremblay, R., Jiang, Y., and Chen, L. (2018). “Seismic Design, Analysis, and Testing of a Friction Stell Braced Frame System for Multi-Storey Buildings in Vancouver.” Key Engineering Materials, 763, 1077–1086.

Uriz, P., and Mahin, S. A. (2008). Toward Earthquake-Resistant Design of Concentrically Braced Steel-Frame Structures. Pacific Earthquake Engineering Research Center.

Vamvatsikos, D., and Cornell, C. A. (2001). “Incremental Dynamic Analysis.” Earthquake Engineering and Structural Dynamics, 31(3), 491–514.

Wang, Y. (2018). “Seismic Performance of Steel Buildings with Braced Dual Configuration and Traditional Frame Systems through Nonlinear Collapse Simulations School of Graduate Studies Master of Applied Science ( Civil Engineering ).” Concordia University, Montreal, Canada.

Wen, Y. K. (1980). “Equivalent linearization for hysteretic systems under random excitation.” Journal of Applied Mechanics, Transactions ASME, 47(1), 150–154.

Wen, Y. K. (1989). “Methods of random wibration for inelastic structures.” Applied Mechanics Reviews, 42(2), 39–52.

Wen, Y. K., Ellingwood, B. R., and Bracci, J. (2004). Vulnerability function framework for consequence-based engineering. Mid-America earthquake center project.

Whittaker, A. S. (1990). An experimental study of the behavior of dual steel systems. University of California at Berkeley.

Yeo, G. L., Cornell, C. A., and University, D. of C. and E. E. S. (2005). Stochastic Characterization and Decision Bases under Time-
Dependent Aftershock Risk in Performance-Based Earthquake Engineering.

Zareian, F., and Krawinkler, H. (2007). “Assessment of probability of collapse and design for collapse safety.” Earthquake Engineering and Structural Dynamics, 36(13), 1901–1914.