ASCE/SEI 7-10, 2010. Minimum Design Loads for Buildings and Other Structures. Structural Engineering Institute of ASCE, Reston, VA. ASCE/SEI 7-16, 2016. Minimum Design Loads and associated criteria Buildings and Other Structures. Structural Engineering Institute of ASCE, Reston, VA. ASCE/SEI 7-22, 2022. Minimum Design Loads and associated criteria for Buildings and Other Structures. Structural Engineering Institute of ASCE, Reston, VA. ASCE/SEI 49-21, 2021. Wind Tunnel Testing for Buildings and Other Structures. Structural Engineering Institute of ASCE, Reston, VA. Bartko, M., Molleti, S., Baskaran, A. 2016. In situ measurements of wind pressures on low slope membrane roofs. J. Wind Eng. Ind. Aerodyn 153, 78–91. Baskaran, A., Molleti, S., Ko, S., Van Reenen, D. 2012. What is Real? - Field Monitoring the Wind Performance of Commercial Roofs. Proceedings of the RCI, Inc., 27th International Convention & Trade Show, March 15-20, 2012, Dallas, TX, USA. Baskaran, A., Molleti, S., Martins N., Martín-Pérez, B. 2018. Development of wind load criteria for commercial roof edge metals. J. Archit. Eng., ASCE, 24(3). Cao, J., Tamura, Y., Yoshida, A. 2012. Wind Pressures on Multi-level Flat Roofs of Medium-rise Buildings. J. W. Eng. Aerodyn.; 103: 1-15. Chavez, M., Baskaran, A., Aldoum M., Stathopoulos T., Geleta, T.N., Bitsuamlak, G.T. 2022. Wind loading on a low-slope gabled roof: Comparison of field measurements, wind tunnel data, and code provisions. Eng. Struct, 267, 114646. Chavez, M., Baskaran A., Feng, Ch., Gan Chowdbury, A. 2020. Effect of assembly construction on the wind induced pressure of membrane roofs. Eng Struct; 221:110725. https://doi.org/10.1016/j.engstruct.2020.110725. Durst., C.S. 1960. Wind Speeds Over Short Periods of Time. Meteor. Magazine, 89, 181-187. Kopp, G. A., and Morrison, M. J. 2014. Component and cladding pressures and zones for the roofs of low-rise buildings. Boundary Layer Wind Tunnel Report, University of Western Ontario, London, ON. NBCC 2020. National Building Code of Canada 2020. Issued by the Canadian Commission on Buildings and Fire Codes, National Research Council of Canada. Martins, N.E., Martin-Perez, B., Baskaran, A., 2016. Application of statistical models to predict roof edge suctions based on wind speed. J. Wind Eng. Ind. Aerodyn, 150, 42-53. Stathopoulos, T., Luchian, H. 1990. Wind Pressures on Buildings with Stepped Roofs. Can. J. Civ. Eng.; 17 (4):569–577. Stathopoulos, T., Luchian, H, 1991. Wind Loads on Flat Roofs with Discontinuities. CSCE Annual Conf., Vancouver. Stathopoulos, T., Zhou, Y.S., 1993. Numerical simulation of wind-induced pressures on buildings of various geometries. J. Wind Eng. Ind. Aerodyn. 46–47 (C), 419–430. Tieleman, H.W., 2003. Wind tunnel simulation of wind loading on low-rise structures: a review. J. Wind Eng. Ind. Aerodyn. 91, 1627–1649.