Login | Register

system dynamics simulation for investigating RFID potential in aircraft dis-assembly operations


system dynamics simulation for investigating RFID potential in aircraft dis-assembly operations

Sandani, Eesa (2013) system dynamics simulation for investigating RFID potential in aircraft dis-assembly operations. Masters thesis, Concordia University.

[thumbnail of Sandani_MSc_F2013.pdf]
Text (application/pdf)
Sandani_MSc_F2013.pdf - Accepted Version


One of the main issues in modern supply chain management is the recovery of value from the end of life (EOL) or defective products by re-manufacturing, reassembly, re-use and recycling. Despite the fact that reverse logistics would impose extra amount of complexity to the supply chain, it has captured a lot of attention as it is possible to recycle the materials where there are limited resources. Through reverse logistics companies will be able to minimize the overall production costs through reclaiming the unsold or defective products’ values which in turn may lead to more productivity and growth, and more importantly reverse logistics may improve the quality of end products by finding the faults of the system and the points which directly or indirectly affect the ultimate product.
However, a number of challenges arise with reverse logistics; integration of the whole supply chain including both inbound activities and outbound activities, creating incentives for return and reuse, huge amount of inspections and imposed complexity to the supply chain as a whole since the number of partners may increase.
On the other hand, technologies such as barcodes, radio frequency identification (RFID), global positioning system (GPS), etc, have made it easier to cope with the aforementioned challenges and complexities of reverse supply chains.
In this thesis, our goal is to examine the potential of radio frequency identification (RFID) technology on dis-assembly operations of aircraft at the End of Life using system dynamics simulation. In particular, a case study on how RFID technology affects the time of dis-assembly of a single helicopter has been conducted in cooperation with Bell Helicopters. The proposed System dynamics simulation model is developed using “AnyLogic”.
The results of our study show that employing RFID technology will lead to a reduction in total dis-assembly time of a helicopter. However, bringing motivations to the market to employ RFID technology in industries and developing trust in the promising benefits and results will require more challenging planning and managerial activities.

Keywords: Reverse logistics (RL), RFID, aviation industry, end of life products (EOL), System Dynamics simulation

Divisions:Concordia University > Gina Cody School of Engineering and Computer Science > Concordia Institute for Information Systems Engineering
Item Type:Thesis (Masters)
Authors:Sandani, Eesa
Institution:Concordia University
Degree Name:M. Sc.
Program:Quality Systems Engineering
Date:13 June 2013
Thesis Supervisor(s):Awasthi, Anjali and Hammad, Amin
ID Code:977406
Deposited By: EESA SANDANI
Deposited On:25 Nov 2013 19:49
Last Modified:07 Sep 2022 15:49


[1] Nativi JJ, Lee S. (2011), impact of RFID information-sharing strategies on a decentralized supply chain with reverse logistics operations (136), pp.366-377
[2] Wei J, Leung S.C.H. (2010), A simulation modeling and analysis for RFID-enabled mixed-product loading strategy for outbound logistics (61), pp.209-215
[3] De Marco1 A. Cagliano A.C., Nervo M.L. Torino C.R.P. (2008), systems and business economics using system dynamics to assess the impact of RFID technology on retail operations.
[4] Qiao-lun G. Tie-gang G. (2011), school of information technology engineering, System dynamics analysis of RFID-EPC’s impact on reverse supply chain pp. 250-255
[5] Lee S.M. Park S.H. , Yoon S.N., Yeon S., (2007), RFID based ubiquitous commerce and consumer trust, industrial management & data systems, (107), pp.605-617
[6] Zhou W. and Piramuthu S. (2011), remanufacturing with RFID item-level, information systems and technologies”, ESCP Europe, information systems and operations management, university of Florida, (52), pp.96-104
[7] Kara S, Rugrungruang F. , Kaebernick H. (2006), simulation modeling of reverse logistics networks, life cycle engineering and management research group, school of mechanical and manufacturing engineering, The university of new south Wales, (106), pp.61-69
[8] Hwang Y.M. and Jae-Jeung Rho (2008), RFID system for centralized reverse supply chain in the apparel industry school of IT business, Auto-ID lab Korea information and communications university
[9] M.A. Hannan a, Maher Arebey a, R.A. Begum, Hassan Basri (2011), radio frequency identification (RFID) and communication technologies for solid waste bin and truck monitoring system, (31), pp.2406-2413
[10] Souza R. , Goh M., Sundarakani B. , Wai W.T., Toh K. , Yong W. (2011) , return on investment calculator for RFID ecosystem of high tech company, the logistics institute - Asia Pacific, national university of Singapore, Adelaide, Australia, (62), pp.820-829
[11] Lee C.K.M., Chan T.M. (2009), development of RFID-based reverse logistics system, a division of systems and engineering management, school of mechanical and aerospace engineering, nanyang technological university, (36), pp.9299-9307
[12] Biagio F., Silvia H., Cecilia M.V.B. (2012), An emergy-based evaluation of a reverse logistics network for steel recycling Almeida programa de Pós-Graduação Engenharia de Produção, Paulista U., Paulo S., Brazil, pp.1-10
[13] Akdoğan S, Coşkun A., Erciyes (2012), drivers of reverse logistics activities: an empirical investigation university, Kayseri, Turkey, Nevşehir university, Nevşehir, Turkey, (58), pp.1640-1649
[14] Kim J.Y., Jung S.H., Choi H.C., Sohn M.K., Yang J.H., and Chang Y.S. 2008, simulation study of RFID based air cargo process school of air transport, transportation & logistics, Korea aerospace university Goyang City
[15] Pfaender J.H. Thesis, school of aerospace engineering Georgia institute of technology December (2006), pp.1-38
[16] The overview of AnyLogic 6.0, http://www.anylogic.com/overview
[17] Printed and chip less RFID forecasts, technologies & players 2011-2021, http://www.sbwire.com/press-releases/sbwire-71424.htm date: 21/2/2013
[18] What is the definition of RFID? http://www.rfidjournal.com/article/articleview/8916/1/399/
[19] Benefits of RFID for supply chain and logistics operations, http://www.electronic-cash-news.com/2009/benefits-of-rfid-for-supply-chain-and-logistics-operations
[20] F.Blumberg D. (2005), introduction to management of reverse logistics and closed loop supply chain processes, (235) pp.1-18
[21] McKinnon A, Cullinane S, Browne M, Whiteing A, (2010) green logistics-improving the environmental sustainability of logistics (384) pp.1-6
[22] RFID security in the aviation industry, http://www.neocatena.com/casestudies/aviation, retrieved (27/2/2013)
[23] Boeing to Launch RFID Program for Airlines in February, http://www.rfidjournal.com/article/view/9107, retrieved (27/2/2013)
[24] RFID integrated solutions, http://www.boeing.com/commercial/aviationservices/information-services/real-time-operations/rfid.html, retrieved (25/1/2013)
[25] Read and Weep (for Joy) by Charles Chandler, http://www.aviationpros.com/article/10704471/turbine-technology-read-and-weep-for-joy?page=2, retrieved (22/1/2013)
[26] http://www.nawouak.net/?doc=ms_thesis+ch=simulation+lang=en, retrieved (18/1/2013)
[27] Discrete Simulation by Bruno Bachelet, http://www.systemdynamics.org/what_is_system_dynamics.html, retrieved (25/2/2013)
[28] Poles R., Cheong F. (2009), A system dynamics model for reducing uncertainty in remanufacturing systems, pp. 1-13
[29] Mishra A., Mishra D. (2011), Applications of RFID in aviation industry: An explanatory review, traffic & transportation, Vol. (22) pp. 363-372
[30] Qiaolun G. and Tiegang G. (2010), impacts of RFID/EPC on optimal decisions of reverse supply chain, pp.512 - 515
[31] Adetiloye K.O. (2012), design of RFID-enabled aircraft reverse logistics network simulation, A thesis in the department of Concordia institute of information systems engineering, http://spectrum.library.concordia.ca/974802/12/Adetiloye_MASc_F2012.pdf
[32] System dynamics methodology by Bob Williams and Bill Harris and edited by WK Kellogg Foundation, (2011)
[33] Shrouds of time, The history of RFID, An AIM publication
[34] Ong S. (2008), using RFID to enhance supply chain visibility- Airbus case Study, pp.1-11
[35] Kumar A., Coop P., RFID/Auto ID think tank meeting IATA HQ, Geneva (2012), RFID applications in improving quality, productivity and maintainability, pp.1-24
[36] Benefits of RFID-enabled supply chain, Copyright © 1999- 2006 RFID4U, (www.rfid4u.com)
[37] How RFID is helping companies reduce their carbon footprints, © 2011 NXP B.V. (www.nxp-rfid.com)
[38] Lieshout M.V, Grossi L., Spinelli G, Helmus S., Kool L., Pennings L., Stap R., Veugen T, Waaij B.V., Borean C., RFID technologies: emerging issues, challenges and policy options, pp. 29-40
[39] Frost & Sullivan, Sahayan S research analyst electronics and security Asia pacific, The global RFID market – The trend today and what lies ahead, pp.1-18
[40] William B. Hetzel B.S. chemistry – Yale university (1988), cycle time reduction and strategic inventory placement across a multistage process, pp.7-10
[41] Xerafy.com, High memory RFID for aerospace, manufacturing, MRO and remote asset management
[42] Maria A, State University of New York at Binghamton, Department of systems science and industrial engineering, Binghamton, NY, U.S.A. introduction to modeling and simulation, pp.7-13
[43] Huang C., UPS director of corporate marketing for the high-tech industry recovering lost profits by improving reverse logistics, pp. 5-13
[44] Kumar N. 2011, reverse supply chain: completing the supply chain loop, consultant in Cognizant’s manufacturing and logistics practice, cognizant (NASDAQ: CTSH), pp.1-7
[45] Finkenzeller K. Giesecke & Devrient Gmbh (2008), Munich, Germany translated by Dorte Muller, ISBN: 978-0-470-69506-7 RFID Handbook, 3rd edition.pp.1-11
[46] Delen D., Hardgrave B.C., William R.S. Spears (2007), RFID for better supply-chain management through enhanced information visibility school of business, Oklahoma state University, USA, 16(5) pp.613-624Operations
[47] Straube F, Vogeler S, Bensel P. (2010), RFID Integrated solutions, Boeing EDGE information service RFID-based supply chain event management department of logistics, institute for technology and management, University of Technology, Berlin, Germany, pp.1-10
[48] Sabbaghi A. and Vaidyanathan G. (2011), Effectiveness and Efficiency of RFID technology in supply chain management: Strategic values and challenges, Indiana University South Bend, School of Business and Economics, 3(2) pp.71-81
[49] Maidstone R., March 7, (2012), Discrete Event Simulation, System Dynamics and Agent Based Simulation: Discussion and Comparison (www.lancs.ac.uk)
[50] Commercial Aviation Clears RFID for Takeoff, Extended memory passive and battery-assisted passive RFID technology enable tracking solutions in the aviation industry, pp.1-4 (www.intelleflex.com/pdf/SolutionsBrief.aviation.pdf)
[51] Nambiar A. N. (2009), A Supply Chain Perspective of RFID Systems, World Academy of Science, Engineering and Technology
[52] Schatteman O. (2001), Reverse logistics, pp.267-279 (www.ashgate.com/pdf/SamplePages/ghsupplych2.pdf)
[53] Dr. Rogers D.S. and Dr. Tibben-Lembke R.S. (1999), going backwards: reverse logistics trends and practices, university of Nevada, Reno, center for logistics management, pp.1-32
[54] Rodrigues M.J. and James K. (2010), commercial and implementation of issues relating to the widespread acceptance and adoption of radio frequency identification technology, master of e-business graduate, Murdoch university, school of business, Murdoch university, senior lecturer in accounting, school of accounting, economics & finance, faculty of business, university of Southern Queensland, Australia, pp.11-21
[55] U.S. navy uses RFID technology to reduce inventory time by 98 percent http://www.intermec.ca/learning/content_library/case_studies/cs2029.aspx
[56] Radio frequency identification (RFID usage) cost benefit analysis (Methods) stores (technology application), http://www.freepatentsonline.com/article/Transportation-Journal/236387851.html
[57] Improving inventory accuracy with RFID http://www.simplyrfid.com/blog/2012/12/5/improving-inventory-accuracy-with-rfid.html
[58] SENTRI program description secure electronic network for travelers rapid inspection, http://www.cbp.gov/xp/cgov/travel/trusted_traveler/sentri/sentri.xml
[59] The magic 5 cents per tag, http://rfidarena.com/2012/4/5/the-magic-5-cents-per-tag.aspx
[60] What is the difference between a passive, semi-passive and active RFID?, http://www.morerfid.com/index.php?do=faq&topic=Introduction-8&display=RFID
[61] Passive RFID tag (or passive tag), http://www.technovelgy.com/ct/technology-article.asp?artnum=47
[62] Active tag (active RFID tag), http://www.technovelgy.com/ct/Technology-Article.asp?ArtNum=21
[63] Ngai, Chenung B.N., Lam S.S. and Ng C.T., (2012), RFID value in aircraft parts supply chain: A case study
[64] Sarac A., Absi N., Dauz S., (2010), a literature review on the impact of RFID technologies on supply chain management. 128(1) pp.77-95
[65] Fleischmann M., Bloemhof-Ruwaard J.M., Dekker R., Van Der Laan E., Van Nunen J.A.E.E. and Wassenhove L.N.V, Quantitative Models for Reverse Logistics: A Review, 97/64/TM.
[66] Asmatulu E., Overcash M., and Twomey J., Recycling of Aircraft: State of the Art in 2011, Journal of Industrial Engineering, Volume 2013, Article ID 960581, 8 pages
[67] Carberry W. (2008), Airplane Recycling Efforts Benefit Boeing Operators, pp.8
[68] Philip Butterworth-Hayes (2006), Europe pioneers aircraft recycling initiatives, pp.2
[69] Carberry B., George P., Yount P. (2007), Aircraft & Composite Recycling, vol.12(1)
[70] Perry J. (2012), Sky-high potential for aircraft recycling, pp.4
[71] AFRA Targets 90% Recyclability of Global Fleet by 2016, (July 2, 2010), http://www.onlineamd.com/aerospace-manufacturing-design-AFRA-recyclability-amd-070210.aspx
[72] Kingsley-Jones M. (2008), Airbus's recycling master plan - Pamela, http://www.flightglobal.com/news/articles/airbuss-recycling-master-plan-pamela-224015
[73] Bourgeois J., Kravchenko M., Nicholas Parsons, Andrew Wang (2007), Design of experiments via factorial designs, https://controls.engin.umich.edu/wiki/index.php/Design_of_experiments_via_factorial_designs#Mathematical_Analysis_Approach
All items in Spectrum are protected by copyright, with all rights reserved. The use of items is governed by Spectrum's terms of access.

Repository Staff Only: item control page

Downloads per month over past year

Research related to the current document (at the CORE website)
- Research related to the current document (at the CORE website)
Back to top Back to top