Login | Register

Design, Manufacturing, and Testing of a Variable Stiffness Composite Cylinder

Title:

Design, Manufacturing, and Testing of a Variable Stiffness Composite Cylinder

Rouhi, Mohammad, Ghayoor, Hossein, Fortin-Simpson, Jeffrey, Zacchia, Tom T., Hoa, Suong V. and Hojjati, Mehdi (2017) Design, Manufacturing, and Testing of a Variable Stiffness Composite Cylinder. Composite Structures . ISSN 02638223 (In Press)

[thumbnail of Rouhi-composite-structures-2017.pdf]
Preview
Text (application/pdf)
Rouhi-composite-structures-2017.pdf - Accepted Version
Available under License Spectrum Terms of Access.
6MB

Official URL: http://dx.doi.org/10.1016/j.compstruct.2017.09.090

Abstract

Fiber steering is one of the promising capabilities of Automated Fiber Placement (AFP) technology in manufacturing of advanced composite structures with spatially tailored properties. The so-called variable stiffness (VS) composites have considerable scope to outperform their traditionally made constant stiffness (CS) counterparts. However, there are several design and manufacturing challenges to be addressed before practically using them as structural components. In this work we demonstrate the design, manufacturing and testing procedure of a variable stiffness (VS) composite cylinder made by fiber steering. The improved bending-induced buckling performance is the objective of the VS cylinder to be compared with its CS counterpart. The experimental results show that the buckling capacity of the VS cylinder is about 18.5% higher than its CS counterpart.

Divisions:Concordia University > Gina Cody School of Engineering and Computer Science > Mechanical, Industrial and Aerospace Engineering
Item Type:Article
Refereed:Yes
Authors:Rouhi, Mohammad and Ghayoor, Hossein and Fortin-Simpson, Jeffrey and Zacchia, Tom T. and Hoa, Suong V. and Hojjati, Mehdi
Journal or Publication:Composite Structures
Date:30 September 2017
Funders:
  • Natural Sciences and Engineering Research Council of Canada (NSERC)
Digital Object Identifier (DOI):10.1016/j.compstruct.2017.09.090
Keywords:Variable stiffness; Design optimization; Buckling; Composite manufacturing; Automated fiber placement
ID Code:983105
Deposited By: Danielle Dennie
Deposited On:05 Oct 2017 13:38
Last Modified:29 Sep 2018 00:01

References:

M.W. Hyer, R.F. Charette Use of curvilinear fiber format in composite structure design AIAA J, 29 (6) (1991), pp. 1011–1015

A.W. Blom, B.F. Tatting, J. Hol, Z. Gürdal Fiber path definitions for elastically tailored conical shells Compos Part B: Eng, 40 (1) (2009), pp. 77–84

A.W. Blom, P.B. Stickler, Z. Gürdal Optimization of a composite cylinder under bending by tailoring stiffness properties in circumferential direction Compos Part B: Eng, 41 (2) (2010), pp. 157–165

M. Sun, M. Hyer Use of material tailoring to improve buckling capacity of elliptical composite cylinders AIAA J, 46 (3) (2008), pp. 770–782

A. Alhajahmad, M. Abdalla, Z. Gürdal Optimal design of tow-placed fuselage panels for maximum strength with buckling considerations J Aircr, 47 (3) (2010), pp. 775–782

J. Van Campen, C. Kassapoglou, Z. Gürdal Generating realistic laminate fiber angle distributions for optimal variable stiffness laminates Compos Part B: Eng, 43 (2) (2012), pp. 354–360

D.H.-J. Lukaszewicz, C. Ward, K.D. Potter The engineering aspects of automated prepreg layup: History, present and future Composites Part B: Engineering, 43 (3) (2012), pp. 997–1009

H. Ghiasi, K. Fayazbakhsh, D. Pasini, L. Lessard Optimum stacking sequence design of composite materials part ii: Variable stiffness design Composite Structures, 93 (1) (2010), pp. 1–13

G.G. Lozano, A. Tiwari, C. Turner, S. Astwood A review on design for manufacture of variable stiffness composite laminates Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 230 (6) (2016), pp. 981–992

P. Ribeiro, H. Akhavan, A. Teter, J. Warmiński A review on the mechanical behaviour of curvilinear fibre composite laminated panels Journal of Composite Materials, 48 (22) (2014), pp. 2761–2777

A. Sabido, L. Bahamonde, R. Harik, M.J. van Tooren Maturity assessment of the laminate variable stiffness design process Composite Structures, 160 (2017), pp. 804–812

A. Khani, M. Abdalla, Z. Gürdal Circumferential stiffness tailoring of general cross section cylinders for maximum buckling load with strength constraints Compos Struct, 94 (9) (2012), pp. 2851–2860

S. White, P. Weaver Bend-free shells under uniform pressure with variable-angle tow derived anisotropy Compos Struct, 94 (11) (2012), pp. 3207–3214

M. Rouhi, H. Ghayoor, S.V. Hoa, M. Hojjati Effect of structural parameters on design of variable-stiffness composite cylinders made by fiber steering Compos Struct, 118 (2014), pp. 472–481

M. Rouhi, H. Ghayoor, S.V. Hoa, M. Hojjati Multi-objective design optimization of variable stiffness composite cylinders Composites Part B: Engineering, 69 (2015), pp. 249–255

M. Rouhi, H. Ghayoor, S.V. Hoa, M. Hojjati The effect of the percentage of steered plies on the bending-induced buckling performance of a variable stiffness composite cylinder Science and Engineering of Composite Materials, 22 (2) (2015), pp. 149–156

A. W. Blom, Structural performance of fiber-placed variable- stiffness composite conical and cylindrical shells, Ph.D. thesis, Delft University of Technology (2010).

M. Rouhi, H. Ghayoor, S.V. Hoa, M. Hojjati, P.M. Weaver Stiffness tailoring of elliptical composite cylinders for axial buckling performance Composite Structures, 150 (2016), pp. 115–123

H. Ghayoor, M. Rouhi, S.V. Hoa, M. Hojjati Use of curvilinear fibers for improved bending-induced buckling capacity of elliptical composite cylinders International Journal of Solids and Structures, 109 (2017), pp. 112–122

C.S. Lopes, P.P. Camanho, Z. Gürdal, B.F. Tatting Progressive failure analysis of tow-placed, variable-stiffness composite panels International Journal of Solids and Structures, 44 (25) (2007), pp. 8493–8516

A. Khani, M. Abdalla, Z.Grdal, J. Sinke, A. Buitenhuis, M. V. Tooren, Design, manufacturing and testing of a fibre steered panel with a large cut-out, Composite Structures.

S.C. White, P.M. Weaver, K.C. Wu Post-buckling analyses of variable-stiffness composite cylinders in axial compression Composite Structures, 123 (2015), pp. 190–203

M. Rouhi, H. Ghayoor, S.V. Hoa, M. Hojjati Computational efficiency and accuracy of multi-step design optimization method for variable stiffness composite structures Thin-Walled Structures, 113 (2017), pp. 136–143
All items in Spectrum are protected by copyright, with all rights reserved. The use of items is governed by Spectrum's terms of access.

Repository Staff Only: item control page

Downloads per month over past year

Research related to the current document (at the CORE website)
- Research related to the current document (at the CORE website)
Back to top Back to top