Breadcrumb

 
 

Hysteresis modeling and experimental verifications of piezoelectric ceramics based actuators

Title:

Hysteresis modeling and experimental verifications of piezoelectric ceramics based actuators

Al Janaideh, Mohammad Farhan (2004) Hysteresis modeling and experimental verifications of piezoelectric ceramics based actuators. Masters thesis, Concordia University.

[img]
Preview
PDF - Accepted Version
2134Kb

Abstract

There is an increasing usage of piezoceramic actuators in micropostioning applications, because they offer many desirable properties, such as fast response, high stiffness, and no backlash. Since piezoceramic materials are ferroelectric, they are fundamentally nonlinear in their response to an applied electric field, exhibiting a hysteresis effect between the electric field and the displacement. This usually causes undesirable inaccuracy or oscillations and even instability, which may severely limit the performance of the piezoceramic actuator system. One way to compensate hysteresis into set up a model that adequately describes the hysteresis and use it in a control loop. Focusing on a piezoelectric actuator from Physik Instrument Company, this thesis concentrates on modeling of hysteresis by using both the Preisach model and Prandtl-Ishlinskii model. The experiment on the hysteresis behavior of the piezoelectric actuator is carried out. Based on the measured data, a detailed discussion on the parameters identification for the two models is given and two models for the given piezoelectric actuator are therefore obtained. The validity of the two models is verified by comparing the actual and the model response of the piezoelectric actuator. The validity of the models is tested by comparing the actual and predicted response of the stacked piezoceramic actuator to input voltages.

Divisions:Concordia University > Faculty of Engineering and Computer Science > Mechanical and Industrial Engineering
Item Type:Thesis (Masters)
Authors:Al Janaideh, Mohammad Farhan
Pagination:xiv, 62 leaves : ill. ; 29 cm.
Institution:Concordia University
Degree Name:M.A. Sc.
Program:Mechanical and Industrial Engineering
Date:2004
Thesis Supervisor(s):Su, C. Y
ID Code:8173
Deposited By:Concordia University Libraries
Deposited On:18 Aug 2011 14:17
Last Modified:18 Aug 2011 14:17
Related URLs:
All items in Spectrum are protected by copyright, with all rights reserved. The use of items is governed by Spectrum's terms of access.

Repository Staff Only: item control page

Document Downloads

More statistics for this item...

Concordia University - Footer