Breadcrumb

 
 

Items where Division is "Concordia University > Faculty of Engineering and Computer Science > Mechanical and Industrial Engineering" and Year is 1995

Up a level
Export as [feed] RSS 2.0 [feed] RSS 1.0 [feed] Atom
Group by: Authors | Item Type | No Grouping
Jump to: A | B | C | D | E | G | H | K | M | N | O | P | Q | S | T | W | Y | Z
Number of items: 27.

A

AL-Ata, Mohanad M. (1995) An investigation of the surface parameters in self-piloting deep hole machining, using a developed methodology of statistical design of experiment. Masters thesis, Concordia University.

Ayyadevara, Venkateswara Rao (1995) Development of an automated robotic deburring workcell. Masters thesis, Concordia University.

B

Baruzzi, Guido S (1995) A second order finite element method for the solution of the transonic Euler and Navier-Stokes equations. PhD thesis, Concordia University.

Boileau, Paul-Émile (1995) A study of secondary suspensions and human driver response to whole-body vehicular vibration and shock. PhD thesis, Concordia University.

C

Chaaban, Mohamed (1995) A finite element calculation method for the heat transfer effects on the current-carrying capacity of underground electrical cables. PhD thesis, Concordia University.

D

Dudley, Nigel David (1995) Performance evaluation of filament wound tubes after long term exposure to aggressive environments. Masters thesis, Concordia University.

E

El-Masry, Mourad (1995) Heuristics for general 3D palletization problems. Masters thesis, Concordia University.

G

Ghila, Abdurazag M (1995) Converging flow between two flat disks. Masters thesis, Concordia University.

H

Hong, Henry (1995) Optimum performance of solenoid injectors for direct injection of gaseous fuels in IC engines. PhD thesis, Concordia University.

K

Kim, Young Soo (1995) Biaxial buckling of laminated composite plates. PhD thesis, Concordia University.

Krishnamurthi., Ganapathi (1995) Development of efficient techniques using substructuring and extended transfer-matrix approach for analysis of large scale vehicular structures. PhD thesis, Concordia University.

M

Moorthy, Murugiah Narayana (1995) Optimal design synthesis of multi speed gear trains. Masters thesis, Concordia University.

N

Naser, Kamal (1995) Bolted flanged connections with full face gaskets. Masters thesis, Concordia University.

O

Oueslati, Faisal (1995) An analytical investigation of passive and active suspension systems for articulated freight vehicles. PhD thesis, Concordia University.

P

Patel, Jagdish (1995) A silicon micromachined subminiature condenser microphone : analysis, design, fabrication and testing. Masters thesis, Concordia University.

Perelli, Fabio (1995) Guidance control of an automated vehicle using CCD camera vision and parallel digital signal processing (DSP) controller. Masters thesis, Concordia University.

Q

Qi, Qin (1995) Hot deformation behaviour of Al₂O₃/7075 Al composites and their matrix alloy. Masters thesis, Concordia University.

S

Shimansky, David (1995) Hot working of high temperature rapidly solidified aluminum alloys FVS1212 and 8009 (FVS0812). Masters thesis, Concordia University.

Sleiman, Mohamad (1995) A time-accurate finite element solution of the Navier-Stokes equations. Masters thesis, Concordia University.

Sun, Liguo (1995) Bolted flanged connections made of fiber reinforced plastic materials. PhD thesis, Concordia University.

T

Taraboulsi, Choucri-Gabriel (1995) Neural network application to vehicle system dynamics. Masters thesis, Concordia University.

W

Wang, Jian (1995) On the wave activity within vortex cores. PhD thesis, Concordia University.

Wang, Yuan (1995) Theoretical and experimental study of cutting mechanics of graphite fiber reinforced preimpregnated composite (prepreg), and the effect of tool geometry on cutting quality and fibre deflection. Masters thesis, Concordia University.

Y

Yan, Li (1995) Experimental and theoretical studies on confined vortex flow structures. PhD thesis, Concordia University.

Yan, Wei (1995) Computational and analytical studies of liquid dynamics in weightlessness. PhD thesis, Concordia University.

Z

Zhang, Siyu (1995) Development of a hybrid knowledge-based system for condition monitoring and diagnosis of rotating machinery. PhD thesis, Concordia University.

Zhao, Fujun (1995) The development of a model-based robotic controller using the transputer technology. Masters thesis, Concordia University.

This list was generated on Sat Jul 26 03:04:47 2014 EDT.

Concordia University - Footer