Breadcrumb

 
 

Items where Division is "Concordia University > Faculty of Engineering and Computer Science > Mechanical and Industrial Engineering" and Year is 2010

Up a level
Export as [feed] RSS 2.0 [feed] RSS 1.0 [feed] Atom
Group by: Authors | Item Type | No Grouping
Jump to: A | B | C | D | E | F | G | H | K | L | M | N | P | R | S | T | W | X | Z
Number of items: 51.

A

Akhlaque-E-Rasul, Shaikh (2010) Compressive Response of Tapered Curved Composite Plates. PhD thesis, Concordia University.

AlKhoury, Raghdan and Joshi, Suraj and Bhat, Rama and Shiping, Ma (2010) Identification of Motive Forces on the Whole Body System during Walking. Advances in Acoustics and Vibration, 2010 .

Alam, Arash Ashkan (2010) Supplier selection problem ; an approach using genetic algorithms. Masters thesis, Concordia University.

Alazzam, Anas (2010) Hybrid flow through microchannels for blood cell separation. PhD thesis, Concordia University.

Aloraier, Abdulkareem S. and Joshi, Suraj and Asadi, Mahyar and Alena, Rubicel G. and Goldak, John A. (2010) Microstructural and hardness modeling: Effect of multiple bead deposition in temper bead welding technique. International Journal of Energy & Technology, 2 (16). pp. 1-11. ISSN 2035-911X

As'ad, Rami Afif (2010) Integrated Production-Inventory Models in Steel Mills Operating in a Fuzzy Environment. PhD thesis, Concordia University.

B

Balike, Krishna Prasad (2010) Kineto-Dynamic Analyses of Vehicle Suspension for Optimal Synthesis. PhD thesis, Concordia University.

Bani Milhim, Alaeddin (2010) Modeling and Fault Tolerant PID Control Of a Quad-Rotor UAV. Masters thesis, Concordia University.

Bashmal, Salem (2010) Analytical and Experimental Studies on In-plane Vibrations and Noise of Rolling Disks Subject to Non-homogeneous Constraints. PhD thesis, Concordia University.

Beauregard, Yvan (2010) A multi-criteria performance study of lean engineering. PhD thesis, Concordia University.

Bowden, Robert Constantinos (2010) Experiments and Modeling of the Onset of Gas Entrainment into Small Branches from a Co-Currently Flowing Stratified Gas-Liquid Regime. PhD thesis, Concordia University.

C

Cree, D. and Pugh, Martin (2010) Production and characterization of a three-dimensional cellular metal-filled ceramic composite. Journal of Materials Processing Technology, 210 (14). pp. 1905-1917. ISSN 09240136

D

Dong, Ren G. and Rakheja, Subhash and McDowell, Thomas W. and Welcome, Daniel E. and Wu, John Z. (2010) Estimation of the biodynamic responses distributed at fingers and palm based on the total response of the hand–arm system. International Journal of Industrial Ergonomics, 40 (4). pp. 425-436. ISSN 01698141

E

Elnady, Tarek (2010) Experimental study of film cooling and heat transfer on a gas turbine vane with shaped holes. PhD thesis, Concordia University.

F

Fallah, Mohammad Saber (2010) New dynamic modeling and pratical control design for MacPherson suspension system. PhD thesis, Concordia University.

Fu, Quiang (2010) A new geometric-and-physics model of milling and an effective approach to medial axis transforms of free-form pockets for high performance machining. PhD thesis, Concordia University.

G

Gholitabar Omrani, Behnam (2010) Optimization-Based Control Methodologies with Applications to Autonomous Vehicle. Masters thesis, Concordia University.

Ghomeshi, Shahin (2010) Asymptotic bounds to outputs of the exact weak solution of the three-dimensional Helmholtz equation. PhD thesis, Concordia University.

Gutiérrez Contreras, Miguel Alejandro (2010) Numerical investigation of model combustors for efficiency improvement and miniature applications. Masters thesis, Concordia University.

H

Han, Xuan (2010) Nonlinear system identification and control using dynamic multi-time scales neural networks. Masters thesis, Concordia University.

Hossain, Md Shakhawat (2010) Microfluidic-microstructure interaction study under oscillating flows : design, modeling, testing and verifications. Masters thesis, Concordia University.

K

Kabir, Ahmed (2010) Vibration Damping Property and Flexural Fatigue Behavior of Glass/Epoxy/Nanoclay Composites. Masters thesis, Concordia University.

Khaksarfard, R. and Kameshki, M. R. and Paraschivoiu, Marius (2010) Numerical simulation of high pressure release and dispersion of hydrogen into air with real gas model. Shock Waves, 20 (3). pp. 205-216. ISSN 0938-1287

Khan, Maqsood Ahmed (2010) Piecewise Arc-Length Parameterized NURBS Tool Paths Generation for 3-Axis CNC Machining of Accurate, Smooth Sculptured Surfaces. PhD thesis, Concordia University.

Khani, Mahboubeh (2010) Magneto-rheological (MR) damper for landing gear system. Masters thesis, Concordia University.

Kordestani, Ario (2010) RIDE VIBRATION AND COMPACTION DYNAMICS OF VIBRATORY SOIL COMPACTORS. Masters thesis, Concordia University.

Kordestani, Ario (2010) Ride vibration and compaction dynamics of vibratory soil compactors. Masters thesis, Concordia University.

L

Leo, Alfin (2010) Development of dynamic pressure sensor for high temperature applications. PhD thesis, Concordia University.

M

Ma, Xiaomeng (2010) Wavelet-based linearization Method in Nonlinear Systems. Masters thesis, Concordia University.

Maleki, Hoda (2010) Structural and Fluid-Structure Interaction Analysis of Stenotic Aortic Valves: Application to Percutaneous Aortic Valve Replacement. Masters thesis, Concordia University.

Mandour, Amr (2010) The effect of liquid viscosity on the polygonal instabilities observed within hollow vortex core. Masters thesis, Concordia University.

McQueen, Hugh (2010) Bibliography: Hot Working Of Stainless Steels: 1. 300, 2. 400 and 3. Duplex Stainless. Documentation. Concordia University . (Unpublished)

McQueen, Hugh (2010) Bibliography: Hot Working of: 1. C, HSLA Steels; 2. Tool Steels; 3. General Behaviour 1.1 Flow Curves, Constitutive; 1.2 Multistage Rolling Simulation; 1.3 Transformation Austenite To Ferrite/Pearlite; 3.1 Microstructures, Mechanisms; 3.2 Ductility; 3.3 Ferritic Steels. Documentation. Concordia University . (Unpublished)

McQueen, Hugh (2010) Successful Transition From Wrought Iron To Steel In Hot Work Processing With Mechanism Differences [#459]. Materials Science Forum , 638-64 . pp. 3380-3387. ISSN 0255-5476

McQueen, Hugh (2010) The Victoria Bridge: 150 Years of Uninterrupted Service to Montreal: 1859 Wrought Iron Tube 1898 Steel Truss. [Video]

Mehran, Pejman (2010) Fuzzy machine vision based inspection. PhD thesis, Concordia University.

N

Naseri, Ehsanallah (2010) Cost based rescheduling approach to handle disruptions in flexible manufacturing systems. Masters thesis, Concordia University.

Nayebpanah, Nastaran (2010) Fault tolerant control for bimodal piecewise affine systems. Masters thesis, Concordia University.

P

Paraschivoiu, Ion and Paraschivoiu, Marius and Kumar, Vimal (2010) Low Reynolds Number Vertical Axis Wind Turbine for Mars. Wind Engineering, 34 (4). pp. 461-476. ISSN 0309-524X

Pouso, Fernando Fernandez (2010) Aggregate production planning with uncertainty for product recovery and remanufacturing. Masters thesis, Concordia University.

R

Rajamohan, Vasudevan (2010) Vibration analysis and optimization of fully and partially MR-fluid treated multi-layer beams. PhD thesis, Concordia University.

Rakheja, Subhash and Dong, R.G. and Patra, S. and Boileau, P.-É. and Marcotte, P. and Warren, C. (2010) Biodynamics of the human body under whole-body vibration: Synthesis of the reported data. International Journal of Industrial Ergonomics, 40 (6). pp. 710-732. ISSN 01698141

S

Shaayegan, Vahid (2010) Linear viscoelastic behaviour and relaxation phenomena of immiscible blends : the application of creep. Masters thesis, Concordia University.

T

Tarasi, Fariba (2010) Suspension plasma sprayed alumina-yttria stabilized zirconia nano-composite thermal barrier coatings : formation and roles of the amorphous phase. PhD thesis, Concordia University.

Tom, Kevin (2010) Investigation of Near Wake Flow Structure of a Horizontal Axis Wind Turbine Using Particle Image Velocimetry. Masters thesis, Concordia University.

W

Wang, Wei Yong (2010) An optimization model for composite wind turbine blade production planning. Masters thesis, Concordia University.

Wijenddra, Sivaram (2010) Energetic swarm control with application to multiple vehicle systems. Masters thesis, Concordia University.

X

Xu, Tao and Sullivan, Pierre and Paraschivoiu, Marius (2010) Fast Large-Eddy Simulation of Low Reynolds Number Flows over a NACA0025. Journal of Aircraft, 47 (1). pp. 328-333. ISSN 0021-8669

Z

Zhang, Xiaobing (2010) Lyapunov-based fault tolerant control of quadrotor unmanned aerial vehicles. Masters thesis, Concordia University.

Zhongyu, Zhao (2010) Active fault tolerant control of an electro-hydraulic driven elevator based on robust adaptive observers. PhD thesis, Concordia University.

Zhu, Boming (2010) Microfluidic Fuel Cells -- Modeling and Simulation. Masters thesis, Concordia University.

This list was generated on Mon Dec 22 03:05:32 2014 EST.

Concordia University - Footer