Login | Register

Development of dynamic pressure sensor for high temperature applications


Development of dynamic pressure sensor for high temperature applications

Leo, Alfin (2010) Development of dynamic pressure sensor for high temperature applications. PhD thesis, Concordia University.

[thumbnail of NR71155.pdf]
Text (application/pdf)
NR71155.pdf - Accepted Version


Pressure measurement under high temperature environments is required in many engineering applications and it poses many practical problems. Pressure patterns are highly desirable for health monitoring for improved performance and accurate prediction of remaining life of systems used in various applications. Data acquisition in harsh environments has always been a major challenge to the available technology. Sensing becomes more intricate in case if it has to operate under extreme conditions of temperature. Propulsion system applications represent one such area that requires a sensor that is absolutely accurate and has utmost sensitivity coupled with the ability to withstand high temperature. The need for such sensors is driven by the dependence of the performance of propulsion system on pressure pattern encountered along the gas path. Associated with that, high resolution, small size, low time dependent drift and stable range of measurement will complete the performance of such Microsystems Sensors using the current technology are capable of reliable measurement for a limited time at an extremely high cost and are bulky thereby preventing online monitoring. Improvement in the durability of the sensors requires new technology and will definitely open new areas of research. A number of technologies have been lately investigated, these technologies targeting specific applications and they are limited by the maximum operating temperature. The objective of this research is to develop a dynamic pressure measurement system that would be capable of operating at high temperatures with the technology of the device based on Silicon Carbon Nitride (SiCN). The principle of operation is based on the drag effect. Silicon carbon-nitride (SiCN) is a material that has been little explored. The service temperature of SiCN is in the range of 1400°C. The structure is produced from a liquid polymer precursor that could be originally formed into any shape. The proposed micro sensor can measure dynamic pressure and detects flow which is very important to know as the flow continuity is critical in many applications. Furthermore pressure measurement can be used as a base for many aspects. For example the proposed micro sensor could be designed and packaged to be fitted in the gas turbine engine. The correlation of the acquired data from the sensors may provide valuable timely information on imminent instability in the gas flow, detect leakage, improve efficiency etc

Divisions:Concordia University > Gina Cody School of Engineering and Computer Science > Mechanical and Industrial Engineering
Item Type:Thesis (PhD)
Authors:Leo, Alfin
Pagination:xviii, 265 leaves : ill. ; 29 cm.
Institution:Concordia University
Degree Name:Ph. D.
Program:Mechanical and Industrial Engineering
Thesis Supervisor(s):Bhat, Rama and Stiharu, Ion
Identification Number:LE 3 C66M43P 2010 L46
ID Code:979485
Deposited By: Concordia University Library
Deposited On:09 Dec 2014 18:00
Last Modified:13 Jul 2020 20:12
Related URLs:
All items in Spectrum are protected by copyright, with all rights reserved. The use of items is governed by Spectrum's terms of access.

Repository Staff Only: item control page

Downloads per month over past year

Research related to the current document (at the CORE website)
- Research related to the current document (at the CORE website)
Back to top Back to top