Items where Division is "Building, Civil and Environmental Engineering" and Year is 2017

A

Abbasi-Garravand, Elham, Mulligan, Catherine N., Laflamme, Claude B. and Clairet, Guillaume (2017) Investigation of the Fouling Effect on a Commercial Semi-Permeable Membrane in the Pressure Retarded Osmosis (PRO) Process. Separation and Purification Technology . ISSN 13835866 (In Press)

Ahmed, Marwa Hussein (2017) Integrated NDE Methods Using Data Fusion-For Bridge Condition Assessment. PhD thesis, Concordia University.

Ai, Xin and Zsaki, Attila Michael (2017) Stability assessment of homogeneous slopes loaded with mobile tracked cranes—An artificial neural network approach. Cogent Engineering, 4 (1). pp. 1-13. ISSN 2331-1916

Al Lafi, Ghassan (2017) 3D Thermal Modeling of Built Environments Using Visual and Infrared Sensing. Masters thesis, Concordia University.

Albahri, Ameen Hamza (2017) Simulation-based optimization for the placement of surveillance cameras in buildings using BIM. PhD thesis, Concordia University.

Aliakbar, Jafarpour (2017) A Comparative Assessment of Insulated Concrete Wall Technologies and Wood-frame Walls in Residential Buildings: A Multi-Criteria Analysis of Hygrothermal Performance, Cost, and Environmental Footprints. Masters thesis, Concordia University.

Arab, Fereshteh (2017) An investigation on the efficiency of sophorolipids in removing arsenic from mine tailings. PhD thesis, Concordia University.

ahmadpanah, Seyedpouyan (2017) Numerical study of two-phase turbulent flow in hydraulic jumps. Masters thesis, Concordia University.

B

Bakr, Ahmed Refaat (2017) Electrochemical Filtration Technology for the Removal and Degradation of Ibuprofen and Bisphenol A from Aqueous Solutions. PhD thesis, Concordia University.

Beattie, Colin J. (2017) Experimental study of air-to-air heat/energy exchangers for use in Arctic housing. Masters thesis, Concordia University.

Bingfei, Zhang (2017) Vision Based Fall Detection and Localization on Construction Sites. Masters thesis, Concordia University.

Bélanger, Alexandre (2017) On the control and automation of a novel membrane electro-bioreactor (MEBR). Masters thesis, Concordia University.

C

Cao, Hanfei (2017) Gain scheduling control and loop interactions in dual duct HVAC system. Masters thesis, Concordia University.

Cotrufo, Nunzio (2017) New methods and models for the ongoing commissioning of HVAC systems in commercial and institutional buildings. PhD thesis, Concordia University.

D

Dawood, Thikra (2017) Integrated Condition Assessment of Subway Networks Using Computer Vision and Nondestructive Evaluation Techniques. PhD thesis, Concordia University.

De Luca, Cedric (2017) Design of a Graphite Based Thermal Energy Storage for Concentrated Solar Power Applications. Masters thesis, Concordia University.

E

El-Zahab, Samer ORCID: https://orcid.org/0000-0001-5242-3791, Asaad, Ahmed, Mohammed Abdelkader, Eslam and Zayed, Tarek (2017) Collective thinking approach for improving leak detection systems. Smart Water, 2 (3). pp. 1-10.

El-khateeb, Laith (2017) Defect-based Condition Assessment Model of Railway infrastructure. Masters thesis, Concordia University.

F

Fellah Jahromi, Arash ORCID: https://orcid.org/0000-0001-8409-5462 (2017) Novel Sequential Batch Electro-Fenton System for Total Kjeldahl Nitrogen Removal: Solution for Highly Polluted Industrial Wastewater. Masters thesis, Concordia University.

G

Ge, Hua, Chiu, Vincent and Stathopoulos, Ted (2017) Effect of overhang on wind-driven rain wetting of facades on a mid-rise building: Field measurements. Building and Environment, 118 . pp. 234-250.

Geng, Li Kai (2017) A GIS-Based Water Quality Assessment and Pollution Control Planning Approach for Lake Management (WQAPCP). Masters thesis, Concordia University.

H

Habibi, Rana (2017) A BIM-based workflow concurrently generating quantitative and qualitative output — a focus on energy performance and architectural representation. Masters thesis, Concordia University.

Harada, Sho (2017) Optical remote sensing technique for the generation of meandering river channel topography and sediment size. Masters thesis, Concordia University.

Hazeri, Somayyeh (2017) Energy Harvesting in Pneumatic Tires through Piezoelectric Material and its Life Cycle Environmental Impact. Masters thesis, Concordia University.

Hwangbo, Wonyeel (2017) A Value-based Approach for Municipal Asset Management. Masters thesis, Concordia University.

I

Ioannidis, Z., Buonomano, A., Athienitis, A.K. and Stathopoulos, T. (2017) Modeling of Double Skin Façades Integrating Photovoltaic Panels and automated roller shades: Analysis of the Thermal and Electrical Performance. Energy and Buildings . ISSN 03787788 (In Press)

J

Jitaru, Bianca (2017) Novel conversion of waste activated sludge to Class A biosolids with support of electrokinetics. Masters thesis, Concordia University.

Jnaid, Aid (2017) Design, Modelling, and Seismic Performance of Outrigger Braced Frame Steel Buildings Subjected to Crustal and Subduction Earthquakes. PhD thesis, Concordia University.

Jun, Cheng (2017) An Experimental and Computational Study of Natural and Hybrid Ventilation in Buildings. Masters thesis, Concordia University.

L

Li, Biao and Wong, Ron C.K. (2017) A mechanistic model for anisotropic thermal strain behavior of soft mudrocks. Engineering Geology, 228 . pp. 146-157. ISSN 00137952

Liu, Zheng (2017) Simulation of Local Climate Control in Shared Offices Based on Occupants Locations and Preferences. Masters thesis, Concordia University.

M

Mahmoud, Sherif Ahmed Ibrahim (2017) Integrated Sustainability Assessment and Rehabilitation Framework for Existing Buildings. PhD thesis, Concordia University.

Mastani Joybari, Mahmood (2017) Simultaneous Charging/Discharging of Phase Change Materials: Characterization of Natural Convection Process. PhD thesis, Concordia University.

Mia, Md Manik (2017) Investigation of Load-Slip Behavior and Fatigue Life of Headed Shear Stud Connector. Masters thesis, Concordia University.

Mofidi, Farhad ORCID: https://orcid.org/0000-0001-6798-0419 (2017) Simulating the Integrated Optimization of Energy Costs and Occupants’ Productivity in Offices. PhD thesis, Concordia University.

Mousavi, Seyyed Ebrahim (2017) Modeling struvite precipitation in a batch reactor using a population balance model in a 3-D computational fluid dynamic (CFD) framework. Masters thesis, Concordia University.

N

Nguyen, Thai Son (2017) Wind-induced Shear and Torsion on Low- and Medium-Rise Earthquake Resistant Steel Braced Frame Buildings. Masters thesis, Concordia University.

O

Obaidat, Ala' Taleb Mufleh (2017) Compressive Behaviour of C-Shaped Confined Masonry Boundary Elements. PhD thesis, Concordia University.

Okoro, Oluchi (2017) Electrocoagulation as Pretreatment for Fouling Reduction in Forward Osmosis Treatment of Shale Gas Produced Water. Masters thesis, Concordia University.

Oum, Nathalie (2017) Modeling socio-economic impacts of infrastructure works. PhD thesis, Concordia University.

P

Pourabadehei, Mehdi (2017) Resuspension of Sediment, a New Technique For Remediation of Contaminated Sediment in Shallow Harbours. PhD thesis, Concordia University.

Q

Qi, Dahai, Goubran, Sherif ORCID: https://orcid.org/0000-0002-2365-0351, Wang, Liangzhu (Leon) and Zmeureanu, Radu (2017) Parametric study of air curtain door aerodynamics performance based on experiments and numerical simulations. Building and Environment . pp. 1-26. ISSN 03601323 (In Press)

R

Rey, Anthony (2017) Multi-Objective Optimization of Solar Thermal Combisystems. PhD thesis, Concordia University.

S

Seddegh, Saeid, Wang, Xiaolin, Joybari, Mahmood Mastani and Haghighat, Fariborz (2017) Investigation of the effect of geometric and operating parameters on thermal behavior of vertical shell-and-tube latent heat energy storage systems. Energy . ISSN 03605442 (In Press)

Shayegan, Zahra, Lee, Chang-Seo and Haghighat, Fariborz (2017) TiO 2 photocatalyst for removal of volatile organic compounds in gas phase – A review. Chemical Engineering Journal . ISSN 13858947 (In Press)

Si Tu, Sui Jiang (2017) Evaluation of Energy and Airflow Performance of Data Centers with Centralized Thermosiphon. Masters thesis, Concordia University.

Soltani, Mohammad Mostafa (2017) Excavator Pose Estimation for Safety Monitoring by Fusing Computer Vision and RTLS Data. PhD thesis, Concordia University.

Stevanovic, Lazar (2017) Multiple Phase Treatment of Contaminated Backfill: Soil Washing, Electrokinetic and Phytoremediation System. Masters thesis, Concordia University.

Sultana, Sharmin (2017) Treatment of High Strength Brewery Wastewater Using Combined Electro-Oxidation and Electro-Fenton Process. Masters thesis, Concordia University.

T

Tabrizian, Parnaz (2017) Co-assembly of graphene oxide / magnetic bimetallic nanoparticles for high-efficiency removal of tetracycline. Masters thesis, Concordia University.

Thapa, Devi Ram (2017) Characteristics of Flow past Warped and Wedge Transitions. PhD thesis, Concordia University.

Thieblemont, Hélène ORCID: https://orcid.org/0000-0002-0477-4682 (2017) Simplified Predictive Control for Load Management: A Self-Learning Approach Applied to Electrically Heated Floor. Masters thesis, Concordia University.

Thieblemont, Hélène, Haghighat, Fariborz, Ooka, Ryozo and Moreau, Alain (2017) Predictive Control Strategies based on Weather Forecast in Buildings with Energy Storage System: A Review of the State-of-the Art. Energy and Buildings . ISSN 03787788 (In Press)

Tominaga, Yoshihide and Stathopoulos, Ted (2017) Steady and unsteady RANS simulations of pollutant dispersion around isolated cubical buildings: Effect of large-scale fluctuations on the concentration field. Journal of Wind Engineering and Industrial Aerodynamics, 165 . pp. 23-33. ISSN 0167-6105

V

Vallianos, Charalampos ORCID: https://orcid.org/0000-0003-4208-5842 (2017) A study of hybrid ventilation in an institutional building: Modeling and predictive control. Masters thesis, Concordia University.

valeh, moayeri (2017) Design Change Management in Construction Projects Using Building Information Modeling (BIM). PhD thesis, Concordia University.

X

Xiao, Bo (2017) Two Dimensional (2D) Visual Tracking in Construction Scenarios. Masters thesis, Concordia University.

Xie, Tianyou (2017) Force Modification Factors for the Seismic Design of Bridges. Masters thesis, Concordia University.

Y

Yuan, Sophie, Vallianos, Charalampos, Athienitis, Andreas and Rao, Jiwu (2017) A study of hybrid ventilation in an institutional building for predictive control. Building and Environment . ISSN 03601323 (In Press)

Z

Zhang, Siyang (2017) The effect of particle geometry and surface asperities on the result of Discrete Element Simulations. Masters thesis, Concordia University.

Zhang, Weiyang (2017) The effect of piles and their loading on nearby retaining walls – an artificial neural network approach. Masters thesis, Concordia University.

Zhang, Ziyang (2017) Development of an Integrated Risk Analysis System (ARCTRA) for Runoff Related Heavy Metal Contaminant in Unsaturated Zone. Masters thesis, Concordia University.