Amouzgar, M and Kahrizi, M (2012) A new approach for improving the silicon texturing process using gas-lift effect. Journal of Physics D: Applied Physics, 45 (10). p. 105102. ISSN 0022-3727
Preview |
Text (application/pdf)
367kBkahrizi2012.pdf - Accepted Version |
Official URL: http://dx.doi.org/10.1088/0022-3727/45/10/105102
Abstract
A new cost-effective and efficient approach is proposed for texturing the crystalline silicon using the gas-lift effect (GLE). The advantages of this approach over the conventional ones are that significantly lower amounts of IPA is used and much shorter etching time is required to achieve the same reflectivity. GLE is generated by taking advantage of the hydrogen bubbles evolved between the silicon wafer being etched and a glass plate, placed in parallel, creating a gap of 1–2 mm. This effect then acts as a pumping mechanism detaching more bubbles from the silicon surface, accelerating them to the top and out of the system, as quickly as they are generated. Experiments were carried out with various combinations of TMAH/IPA concentrations for two different GLE conditions to analyse and determine their influence on etching time, etching rate, surface morphology and reflectivity of the textured silicon surface. The use of this new approach in surface texturing, allowed the reduction of the required IPA by 50% and etching time by more than 60% to achieve the same reflectivity. This can ultimately lead to a significant reduction in cost by increasing the efficiency of the texturing process. A combination of 3.5% IPA and 2 mm GLE resulted in a textured silicon surface having a low specular solar-weighted reflectivity of 0.15%.
Divisions: | Concordia University > Gina Cody School of Engineering and Computer Science > Electrical and Computer Engineering |
---|---|
Item Type: | Article |
Refereed: | Yes |
Authors: | Amouzgar, M and Kahrizi, M |
Journal or Publication: | Journal of Physics D: Applied Physics |
Date: | 2012 |
Digital Object Identifier (DOI): | 10.1088/0022-3727/45/10/105102 |
ID Code: | 975158 |
Deposited By: | Danielle Dennie |
Deposited On: | 21 Jan 2013 13:28 |
Last Modified: | 18 Jan 2018 17:39 |
References:
[1] Green M A 1982 Solar Cells: Operating Principles, Technology and System Applications vol 1 (Kensington, NSW, Aust.: University of New South Wales)[2] Papet P, Nichiporuk O, Fave A, Kaminski A, Bazer-Bachi B and Lemiti M 2006 TMAH texturisation and etching of interdigitated back-contact solar cells Mater. Sci. Poland 24 1043–9
[3] Merlos A, Acero M, Bao M H, Bausells J and Esteve J 1993 TMAH/IPA anisotropic etching characteristics Sensors Actuators A 37–38 737–43
[4] Zubel I, Barycka I, Kotowska K and Kramkowaska M 2001 Silicon anisotropic etching in alkaline solutions IV, The effect of organic and inorganic agents on silicon anisotropic etching process Sensors Actuators A 87 163–71
[5] Zubel I and Kramkowska M 2001 The effect of isopropyl alcohol on etching rate and roughness of (1 0 0) Si surface etched in KOH and TMAH solutions Sensors Actuators A 93 138–47
[6] Weiying O, Yao Z, Hailing L, Lei Z, Chunlan Z, Hongwei D, Min L, Weiming L, Jun Z and Wenjing W 2010 Texturization of mono-crtystalline silicon solar cells in TMAH without the addition of surfactant J. Semicond. 31 106002
[7] Kwon S, Yi J, Yoon S, Lee J S and Kim D 2009 Effects of textured morphology on the short circuit current of single crystalline silicon solar cells: Evaluation of alkaline wet-texture process Curr. Appl. Phys. 9 1310–4
[8] Yang C R, Yang C H and Chen P Y 2005 Study on anisotropic silicon etching characteristics in various surfactant-added tetramethyl ammonium hydroxide water solutions J. Microelectron. Microeng. 15 2028–37
[9] Chu A K, Wang J S, Tsai Z Y and Lee C K 2009 A simple and cost-effective approach for fabricating pyramids on crystalline silicon wafers Sol. Energy Mater. Sol. Cells 93 1276–80
[10] Vogt H and Kreysa G 2008 Electrochemical reactors Ullmann's Encyclopedia of Industrial Chemistry
[11] Grotheer M P 2000 electrochemical processing, inorganic Kirk-Othmer Encyclopedia of Chemical Technology 9 618–52
[12] Yang C R, Chen P Y, Yang C H, Chiou Y C and Lee R T 2005 Effects of various ion-typed surfactants on silicon anisotropic etching properties in KOH and TMAH solutions Sensors Actuators A 119 271–81
Repository Staff Only: item control page