El shenawy, Ahmed (2013) Exergy-based Index for the assessment of building sustainability. PhD thesis, Concordia University.
Preview |
Text (application/pdf)
6MBEl_shenawy_PhD_F2013.pdf - Accepted Version Available under License Spectrum Terms of Access. |
Abstract
ABSTRACT
Exergy-based Index for the assessment of building sustainability
Ahmed El shenawy, Ph.D.
Concordia University, 2013
The declining state of the environment, combined with the increasing scarcity of natural resources and economic recession, presents us with the need to discover building practices that are capable of producing sustainable buildings. Building promoters are racing to certify the sustainability of their projects, aware that building sustainability assessment will delineate the features of current and future building practice. A sustainable building implies that resource depletion and waste emissions are considered during its whole life cycle. This research project proposes a new methodology and Exergy-based Index to assess building sustainability and to assist decision makers comparing building alternatives, since the wrong decisions can lead to serious consequences and even precipitate crises. The proposed methodology uses the SBTool that has been utilized for defining the criteria for analysing and ranking the environmental performance of buildings. Over the past decade, significant efforts have been made in developing Sustainable Building (SB) assessment tools that allow all stakeholders/actors to be aware of the consequences of various choices and to assess building performance. These SB tools, approaches, rating systems, indices and methods of assessment have already been utilized in the market (e.g., Multi-Criteria Assessment (MCA) methods, such as LEED and SBTool, Life Cycle Analysis (LCA) systems, like ATHENA, and the Single Index (SI) approach (Ecological footprint)). However, are existing SB assessment tools actually capable of considering the regional issues? Is it possible to use them to assess all types of buildings? Are they objective, easy to customize? Is it easy to interpret their final assessment results and are those results transparent to the end users? Despite the usefulness of the current assessment methods in contributing towards a more sustainable building industry, some of the limitations and critiques of these assessment methods indicate that the tools should evolve toward a genuinely generic and scientifically global SB assessment tool.
After discussing and summarizing the limitations of the existing definitions, indices and rating systems for building sustainability assessment, a definition of a sustainable building in terms of thermodynamics is proposed, mainly based on the exergy concept. This proposal is supported by a general mathematical calculation for the exergy-based index of building sustainability. The index uses the comparison between the available solar exergy (considered to be the only renewable energy source) and the exergy lost due to a building’s construction and operation to measure the a building’s sustainability. Moreover, the selection and transfer of data from the SBTool, and the assumptions and additional calculations required for the assessment of the exergy-based index of sustainability are presented and quantified. A rating scale is also presented along with the index of building sustainability. Finally, case studies of residential and commercial buildings are used to demonstrate the framework’s reliability. The contribution of the proposed Exergy-based index is evaluated by comparing its similarities and differences with a selection of the available building assessment tools and methods.
| Divisions: | Concordia University > Gina Cody School of Engineering and Computer Science > Building, Civil and Environmental Engineering |
|---|---|
| Item Type: | Thesis (PhD) |
| Authors: | El shenawy, Ahmed |
| Institution: | Concordia University |
| Degree Name: | Ph. D. |
| Program: | Building Engineering |
| Date: | 21 May 2013 |
| Thesis Supervisor(s): | Zmeureanu, Radu |
| Keywords: | sustainable buildings, assessment tools, rating systems, single index, exergy |
| ID Code: | 977298 |
| Deposited By: | AHMED MOHAMED EL SHENAWY |
| Deposited On: | 21 Nov 2013 19:25 |
| Last Modified: | 18 Jan 2018 17:44 |
References:
Ahluwalia, S. S. (2008). "A framework for efficient condition assessment of the building infrastructure." University of Waterloo, Waterloo, Ontario, Canada.Alberti, M. (1996). "Measuring urban sustainability." Environmental impact assessment review, 16(4), 381-424.
Aotake, N., Ofuiji, N., Miura, M., Shimada, N., and Niwa, H. "Comparison among results of various comprehensive assessment systems-a case study for a model building using CASBEE, BREEAM and LEED."
Arons, J. S., van der Kooi, H., and Sankaranarayanan, K. (2004). "Efficiency and Sustainability in the Energy and Chemical Industries: Scientific Principles and Case Studies.", CRC.
Athena™. (2005). "Cement and structural concrete products: life cycle inventory update #2." Athena Sustainable Materials Institute, Ottawa.
Ayres, R. U. (2007). "On the practical limits to substitution." Ecological Economics, 61(1), 115-128.
Ayres, R. U., Bergh, J., and Gowdy, J. M. (1998). "Viewpoint: weak versus strong sustainability."
Baouendi, R., R Zmeureanu, P. E., and Bradley, B. (2005). "Energy and emission estimator: A prototype tool for designing Canadian houses." Journal of architectural engineering, 11, 50.
Barnthouse, L. W., Fava, K., Humphreys, R., Hunt, L., Laibson, S., Noesen, G., Norris, J., Owens, J., Todd, B., Vigon, K., Weitz, J., and Young. (1998). "Life-cycle impact assessment: the state-of-the-art.", Society of Environmental Toxicology and Chemistry, Pensacola.
Bashford, H. H., and Robson, K. F. "Defining the building green process." ASCE., 405-423.
Becker, B. (1997). "Sustainability assessment–a review of values, concepts and methodological approaches." Consultative Group on International Agricultural Research, CGIAR. Washington, United States.
Bejan, A., & Mamut, E. (Eds.). (1999). Thermodynamic optimization of complex energy systems (Vol. 69). Kluwer Academic Pub.
Bell, S., and Morse, S. (2008). "Sustainability indicators: measuring the immeasurable?", Earthscan/James & James.
Bender, M. J., and Simonovic, S. P. (1997). "Consensus as the measure of sustainability." Hydrological sciences journal, 42(4), 493-500.
Bhatt, R., Macwan, J. E. M., Bhatt, D., and Patel, V. (2010). "Analytic Hierarchy Process Approach for Criteria Ranking of Sustainable Building Assessment: A Case Study." World Applied Sciences Journal, 8(7), 881-888.
Bin, G. (2011). "Exploring the Environmental Impact of A Residential Life Cycle, Including Retrofits: Ecological Footprint Application to A Life Cycle Analysis Framework in Ontario."
Bin, G., and Parker, P. (2012). "Measuring buildings for sustainability: Comparing the initial and retrofit ecological footprint of a century home-The REEP House." Applied Energy. 93: 24-32.
Blanchard, S., and Reppe, P. (1998). "Life cycle analysis of a residential home in Michigan.", Center for Sustainable Systems, University of Michigan.
Bourdeau, L. (1999). "Sustainable development and the future of construction: a comparison of visions from various countries." Building Research & Information, 27(6), 354-366.
Brochner, J., Ang, G. K. I., and Fredriksson, G. (1999). "Sustainability and the performance concept: encouraging innovative environmental technology in construction." Building Research & Information, 27(6), 367-372.
Brown, B. J., Hanson, M. E., Liverman, D. M., and Merideth, R. W. (1987). "Global sustainability: toward definition." Environmental Management, 11(6), 713-719.
Brown, M. T., and Herendeen, R. A. (1996). "Embodied energy analysis and EMERGY analysis: a comparative view." Ecological Economics, 19(3), 219-235.
Brundtland, G. H. (1987). "World Commission on environment and development: our common future." Oxford University Press.
Canada, G. O. (2001). "Canada's third national report on climate change: Action to meet commitments under the United Nations Framework Convention on Climate Change." Ottawa, Canada.
Carson, R. (1962). "Silent Spring." Boston: Houghton Mifflin Company.
Cengel, Y.A. & Boles, M.A. (2008). “Thermodynamics an Engineering Approach, 6th ed., McGraw-Hill Higher Education: Boston.
Chang. (2005). "The revised version of the GBTool for subtropical Taiwan from the barrier to success."
Chichilnisky, G. (1997). "What is sustainability development ?." Land Economics, 73(4), 467.
Clifton, D. (2010). "Representing a Sustainable World-A Typology Approach." Journal of Sustainable Development, 3(2), P40.
Cole, R. J. (1999). "Building environmental assessment methods: clarifying intentions." Building Research & Information, 27(4-5), 230-246.
Cole, R. J. (2005). "Building environmental assessment methods: redefining intentions and roles." Building Research & Information, 33(5), 455-467.
Organic Compounds: Physical and Thermo chemical Data, http://www.retscreen.net, (http://www2.ucdsb.on.ca/tiss/stretton/Database/inorganic_thermo), (latest access 25/07/2009).
Cole, R. J., & Larsson, N. (2000). GBC 2000 Assessment manual. hnp://www. greenbuilding. Ca.
Cooper, I. (1999). "Which focus for building assessment methods - environmental performance or sustainability?" Building Research & Information, 27(4-5), 321-331.
Cornelissen, R. L. (1997). "Thermodynamics and sustainable development; the use of exergy analysis and the reduction of irreversibility." University of Twente.
Cornelissen, R. L., and Hirs, G. G. (2002). "The value of the exergetic life cycle assessment besides the LCA." Energy Conversion and Management, 43(9-12), 1417-1424.
Council, U. (2002). "Green Building Rating System For New Construction & Major Renovations (LEED-NC) Version 2.1." November.
Crawley, D., and Aho, I. (1999). "Building environmental assessment methods: applications and development trends." Building Research & Information, 27(4), 300-308.
DeArmon, S. (2009). "A Quantitative Assessment of a LEED Certified Campus Building."
Del Percio, S. (2007). What’s Wrong with LEED?. The Next American City. http://americancity. org/article. php.
Devuyst, D., Hens, L., and De Lannoy, W. (2001). "How green is the city?: sustainability assessment and the management of urban environments." Columbia University Press.
Dewulf, J., and Van Langenhove, H. (2005). "Integrating industrial ecology principles into a set of environmental sustainability indicators for technology assessment." Resources, conservation and recycling, 43(4), 419-432.
Dewulf, J., Van Langenhove, H., and Dirckx, J. (2001). "Exergy analysis in the assessment of the sustainability of waste gas treatment systems." The Science of the Total Environment, 273(1-3), 41-52.
Dewulf, J., Van Langenhove, H., Mulder, J., Van Den Berg, M. M. D., Van Der Kooi, H. J., and de Swaan Arons, J. (2000). "Illustrations towards quantifying the sustainability of technology." Green Chem., 2(3), 108-114.
Dietz, T., Rosa, E. A., and York, R. (2009). "Environmentally efficient well-being: Rethinking sustainability as the relationship between human well-being and environmental impacts." Human Ecology Review, 16(1), 114-123.
Dincer, I. (2002). The role of exergy in energy policy making. Energy Policy, 30(2), 137-149.
Dincer, I., & Rosen, M. A. (2004). Exergy as a driver for achieving sustainability. International journal of green energy, 1(1), 1-19.
Dincer, I., & Rosen, M. A. (2007). Exergy: Energy, environment and sustainable development (1st ed.). Oxford, UK: Elsivier Ltd.
Ding, G. K. C. (2005). "Developing a multi criteria approach for the measurement of sustainable performance." Building Research & Information, 33(1), 3-16.
Ekins, P., Simon, S., Deutsch, L., Folke, C., and De Groot, R. (2003). "A framework for the practical application of the concepts of critical natural capital and strong sustainability* 1." Ecological Economics, 44(2-3), 165-185.
Ekvall, T. (2000). "A market-based approach to allocation at open-loop recycling." Resources, Conservation and Recycling, 29(1), 91-109.
El shenawy, A., and Zmeureanu, R. (2013). "Exergy-based index for assessing the building sustainability." Building and Environment, 60(0), 202-210.
Farrell, A., and Hart, M. (1998). "What does sustainability really mean?: The search for useful indicators." Environment: Science and Policy for Sustainable Development, 40(9), 4-31.
Finnveden, G., Hauschild, M. Z., Ekvall, T., Guinee, J., Heijungs, R., Hellweg, S., Koehler, A., Pennington, D., and Suh, S. (2009). "Recent developments in life cycle assessment." Journal of Environmental Management, 91(1), 1-21.
Foliente, G., Tucker, S., Seo, S., Hall, M., Boxhall, P., Clark, M., Mellon R., and Larsson, N. (2007). "Performance setting and measurement for sustainable commercial buildings." YOUR BUILDING
Forsberg, A., and Malmborg von, F. (2004). "Tools for environmental assessment of the built environment." Building and Environment, 39(2), 223-228.
Fowler, K. M., & Rauch, E. M. (2006). Sustainable building rating systems summary (No. PNNL-15858). Pacific Northwest National Laboratory (PNNL), Richland, WA (US).
Frijia, S., Guhathakurta, S., and Williams, E. D. (2012). "Functional unit, technological dynamics and scaling properties for the life cycle energy of residences." Environmental Science & Technology, 46, 1782−1788.
Gasparatos, A., El-Haram, M., and Horner, M. (2008). "A critical review of reductionist approaches for assessing the progress towards sustainability." Environmental Impact Assessment Review, 28(4-5), 286-311.
Gavrilescu, M., and Murray, M. (2011). "2.66 - Sustainability." Comprehensive Biotechnology (Second Edition), Academic Press, Burlington, 905-923.
Giannetti, B. F., Barrella, F. A., and Almeida, C. M. V. B. (2006). "A combined tool for environmental scientists and decision makers: ternary diagrams and emergy accounting." Journal of cleaner production, 14(2), 201-210.
Glavic, P., and Lukman, R. (2007). "Review of sustainability terms and their definitions." Journal of Cleaner Production, 15(18), 1875-1885.
Gong, M. (2001). "On exergy and sustainable development--Part 2: Indicators and methods." Exergy, an International journal, 1(4), 217-233.
Gowri, K. (2004). Green building rating systems: An overview. ASHRAE Journal, 46 (11): 56-60, 46(PNNL-SA-42827).
Graham, P. (1997). Methods for Assessing the Sustainability of Construction and Development Activity. Royal Melbourne Institute of Technology.
Green, M. A., Emery, K., King, D. L., Igari, S., & Warta, W. (2004). Solar cell efficiency tables (version 24). Progress in Photovoltaics: Research and Applications, 12(5), 365-372.
Haapio, A., and Viitaniemi, P. (2008). "A critical review of building environmental assessment tools." Environmental impact assessment review, 28(7), 469-482.
Halozan, H. (2007, June). HFCs or the Old Refrigerants-what is the best Choice?. In Presentation to XII European Conference Technological Innovations in Air Conditioning and Refrigeration Industry.
Hammond, G., and Jones, C. (2008). "Inventory of Carbon & Energy: ICE." Sustainable Energy Research Team, Department of Mechanical Engineering, University of Bath.
Handfield, R. B., Melnyk, S. A., Calantone, R. J., and Curkovic, S. (2001). "Integrating environmental concerns into the design process: the gap between theory and practice." Engineering Management, IEEE Transactions on, 48(2), 189-208.
Harrington, L. W. (1992). "Measuring sustainability: issues and alternatives." Journal of farming systems research-extension, 3(1), 1-20.
Hau, J. L., and Bakshi, B. R. (2004). "Promise and problems of emergy analysis." Ecological Modelling, 178(1-2), 215-225.
Heintz, B., and Baisnee, P. F. (1992). "System boundaries: life-cycle assessment." Report from a workshop in Leiden, Brussels, Bergium.
Hepbasli, A. (2008). "A key review on exergetic analysis and assessment of renewable energy resources for a sustainable future." Renewable and Sustainable Energy Reviews, 12(3), 593-661.
Hill, R. C., and Bowen, P. A. (1997). "Sustainable construction: principles and a framework for attainment." Construction Management and Economics, 15(3), 223-239.
Hoffmann, W. (2006). "PV solar electricity industry: Market growth and perspective." Solar energy materials and solar cells, 90(18), 3285-3311.
Holladay, M. (2010). "What does 'Sustainable' mean?" Can the planet continue to support U.S levels of consumptions? from (http://www.greenbuildingadvisor.com/blogs/dept/musings/what-does-sustainable-mean), ((latest access 25/07/2009).
Houghton, J. T., Meira Filho, L. G., Callender, B. A., Harris, N., Kattenberg, A., and Maskell, K. (1996). "Climate change 1995: the science of climate change. Contribution of Working Group I to the Second Assessment of the Intergovernmental Panel on Climate Change." Cambridge Univ. Press, Cambridge.
Howarth, R. B. (1996). "Discount rates and sustainable development." Ecological modelling, 92(2), 263-270.
Hueting, R., and Reijnders, L. (2004). "Broad sustainability contra sustainability: the proper construction of sustainability indicators." Ecological Economics, 50(3-4), 249-260.
IEA. (2001). "Annex 31 Energy-Related Environmental Impact of Buildings." IEA.
iiSBE. (2010). "SBTool previous versions." International Initiative for a Sustainable Built Environment.
International Standards Organization (ISO). (1997). “Environmental management-Life cycle assessment-Principles and framework.” International Standard 14040.
Jeffries, D. S., Clair, T. A., Couture, S., Dillon, P. J., Dupont, J., Keller, W., McNicol, D. K., Turner, M. A., Vet, R., and Weeber, R. (2003). "Assessing the recovery of lakes in southeastern Canada from the effects of acidic deposition." AMBIO: A Journal of the Human Environment, 32(3), 176-182.
Jeswani, H. K., Azapagic, A., Schepelmann, P., and Ritthoff, M. (2010). "Options for broadening and deepening the LCA approaches." Journal of Cleaner Production, 18(2), 120-127.
Jeter, S. M. (1981). "Maximum conversion efficiency for the utilization of direct solar radiation." Solar energy, 26(3), 231-236.
Kates, R., Clark, W., Corell, R., Hall, J. M., Jaeger, C. C., Lowe, I., McCarthy, J. J., Schellnhuber, H. J., Bolin, B., and Dickson, N. M. (2001). "Sustainability science."
Keeping, M. (2000). "What about demand? Do investors want ‘sustainable buildings’?" The Cutting Edge 2000.
Kemmler, A., and Spreng, D. (2007). "Energy indicators for tracking sustainability in developing countries." Energy policy, 35(4), 2466-2480.
Keoleian, G. A., Blanchard, S., and Reppe, P. (2008). "Life Cycle Energy, Costs, and Strategies for Improving a Single Family House." Journal of Industrial Ecology, 4(2), 135-156.
Kidd, C. V. (1992). “The evolution of sustainability.” Journal of Agricultural and Environmental Ethics, 5(1), 1-26.
Klein, S. A., Beckman, W. A., Mitchell, J. W., Duffie, J. A., Duffie, N. A., Freeman, T. L., Mitchell, J. C., Braun, J. E., Evans, B. L., Kummer, J. P., Urban, R. E., Fiksel, A., Thornton, J. w., Blair, N. J., Williams, P. M., Bradley, D. E., McDowell, T. P., Kummert, M., and Arias, D. (2004). "TRNSYS 16 – A TRaNsient System Simulation program, User manual." The University of Wisconsin, Madison, WI.
Kondo, K. (2009). Energy and exergy utilization efficiencies in the Japanese residential/commercial sectors. Energy policy, 37(9), 3475-3483.
Kotas, T. J. (1985). "The exergy method of thermal plant analysis." Anchor Brendon Ltd, Tiptree, Essex.
Kravanja, Z. (2012). "Process systems engineering as an integral part of global systems engineering by virtue of its energy—environmental nexus." Current Opinion in Chemical Engineering.
Landsberg, P. T., and Mallinson, J. R. "Thermodynamic constraints, effective temperatures and solar cells." International Conference on Solar Electricity, 27-42.
Larsson, N. (2007). "Rating systems and SBTool." The International Initiative for a Sustainable Built Environment.
Laws, D., Scholz, R. W., Shiroyama, H., Susskind, L., Suzuki, T., and Weber, O. (2004). "Expert views on sustainability and technology implementation." International Journal of Sustainable Development & World Ecology, 11(3), 247-261.
Leckner, M., and Zmeureanu, R. (2012). "Life cycle cost and energy analysis of a Net Zero Energy House with solar combisystem." Applied Energy, 88(1), 232-241.
Lee, Y. J., and Huang, C. M. (2007). "Sustainability index for Taipei." Environmental Impact Assessment Review, 27(6), 505-521.
LEED. (2007). "homepage of LEED®" Retrieved Aug 2010, from [web page], http://www.usgbc.org.
Lélé, S. M. (1991)
All items in Spectrum are protected by copyright, with all rights reserved. The use of items is governed by Spectrum's terms of access.
Repository Staff Only: item control page
Download Statistics
Download Statistics