Siraki, Arbi Gharakhani, Pillay, Pragasen and Angers, Pierre (2013) Full Load Efficiency Estimation of Refurbished Induction Machines From No-Load Testing. IEEE Transactions on Energy Conversion, 28 (2). pp. 317-326. ISSN 0885-8969
Preview |
Text (application/pdf)
580kBPillay2013b.pdf - Accepted Version |
Official URL: http://dx.doi.org/10.1109/TEC.2013.2240302
Abstract
The efficient operation of induction machines and methods to estimate their working efficiency have received increased attention in recent years due to the growing awareness of the demand side energy management programs. Various techniques have been proposed for efficiency estimation with different requirements. Numerous works have also been published in the literature about estimating the efficiency of a machine in situ, under the loaded condition without disturbing its operation. However, very little has been done on estimation of the efficiency of the machines after the refurbishment process in the workshops, which in fact can affect numerous machines in the industry. In this paper, a method is proposed for this purpose, which requires only the no-load test. The proposed method is validated by experimental results with seven different induction machines.
| Divisions: | Concordia University > Gina Cody School of Engineering and Computer Science > Electrical and Computer Engineering |
|---|---|
| Item Type: | Article |
| Refereed: | Yes |
| Authors: | Siraki, Arbi Gharakhani and Pillay, Pragasen and Angers, Pierre |
| Journal or Publication: | IEEE Transactions on Energy Conversion |
| Date: | 2013 |
| Digital Object Identifier (DOI): | 10.1109/TEC.2013.2240302 |
| Keywords: | Efficiency estimation induction motor no-load test |
| ID Code: | 977955 |
| Deposited By: | Danielle Dennie |
| Deposited On: | 22 Oct 2013 17:40 |
| Last Modified: | 18 Jan 2018 17:45 |
References:
1. P. Pillay and K. A. Fendley "The contribution of energy efficient motors to demand and energy savings in the petrochemical industry", IEEE Trans. Power Syst., vol. 10, no. 2, pp.1085 -1093 19952. "IEEE Standard Test Procedure for Polyphase Induction Motors and Generators. IEEE Standard 112, 2004.",
3. "Motor repair, Drivepower. (Oct. 1, 1999). [Online] Available:", [online] Available:
http://www.esource. com/public/pdf/Drivepower.pdf
4. H. W. Penrose and B. Bauer "Time savings and energy efficiency through alternate electric motor rewind methods", Proc. Elect. Electron. Insul. Conf., Elect. Manuf. Coil Winding Conf., pp.457 -460 1995
5. C. Wenping and K. J. Bradley "Assessing the impacts of rewind and repeated rewinds on induction motors: Is an opportunity for Re-designing the machine being wasted?", IEEE Trans. Ind. Appl., vol. 42, no. 4, pp.958 -964 2006
6. E. d. C Bortoni , J. Haddad , A. H. M. Santos , E. M. d. Azevedo and R. A. Yamachita "Analysis of repairs on three-phase squirrel-cage induction motors performance", IEEE Trans. Energy Convers., vol. 22, no. 2, pp.383 -388 2007
7. J. R. Holmquist , J. A. Rooks and M. E. Richter "Practical approach for determining motor efficiency in the field using calculated and measured values", IEEE Trans. Ind. Appl., vol. 40, no. 1, pp.242 -248 2004
8. J. S. Hsu , J. D. Kueck , M. Olszewski , D. A. Casada , P. J. Otaduy and L. M. Tolbert "Comparison of induction motor field efficiency evaluation methods", IEEE Tran. Ind. Appl., vol. 34, no. 1, pp.117 -125 1998
9. "In-plant electric motor loading and efficiency techniques, Ontario Hydro Rep., TSDD-90–043, 1990.",
10. J. S. Hsu and B. P. Scoggins "Field test of motor efficiency and load changes through air-gap torque", IEEE Trans. Energy Convers., vol. 10, no. 3, pp.477 -483 1995
11. J. S. Hsu and P. L. Sorenson "Field assessment of induction motor efficiency through air-gap torque", IEEE Trans. Energy Convers., vol. 11, no. 3, pp.489 -494 1996
12. P. Pillay , V. Levin , P. Otaduy and J. Kueck "In-situ induction motor efficiency determination using the genetic algorithm", IEEE Trans. Energy Convers., vol. 13, no. 4, pp.326 -333 1998
13. T. Phumiphak and C. Chat-uthai "An economical method for induction motor field efficiency estimation for use in on-field energy audit and management", Proc. IEEE Int. Conf. Power Syst. Technol., pp.1250 -1254 2004
14. M. S. Aspalli , S. B. Shetagar and S. F. Kodad "Estimation of induction motor field efficiency for energy audit and management using genetic algorithm", Proc. IEEE Int. Conf. Sensing Technol., pp.440 -445 2008
15. M. Cunkas and T. Sag "Efficiency determination of induction motors using multi-objective evolutionary algorithms", Elsevier J. Adv. Eng. Software, vol. 41, pp.255 -261 2010
16. B. Lu , C. Wenping , I. French , K. J. Bradley and T. G. Habetler "Non-intrusive efficiency determination of in-situ induction motors using genetic algorithm and air-gap torque methods", Proc. IEEE 42nd Ind. Appl. Soc. Annu. Meet., pp.1186 -1192 2007
17. V.P. Sakthivel , R. Bhuvaneswari and S. Subramanian "Non-intrusive efficiency estimation method for energy auditing and management of in-service induction motor using bacterial foraging algorithm", IET Electr. Power Appl., vol. 4, no. 8, pp.579 -590 2010
18. F. Waldhart and J. P. Bache "Online efficiency determination of three phase asynchronous machines by start-up data", Proc. IEEE Int. Conf. Diagnostics Elect. Mach., Power Electron. Drives, pp.1 -6 2009
19. C. Grantham , H. Tabatanaei-Yazdi and M. F. Rahman "A novel method for rapid efficiency measurement of three phase induction motors", IEEE Trans. Energy Convers., vol. 14, no. 4, pp.1236 -1240 1999
20. D. J. McKinnon and C. Grantham "Improved efficiency test methods for three-phase induction machines", Proc. IEEE 40th Ind. Appl. Soc. Annu. Meet., pp.466 -473 2005
21. J. D. Kueck , M. Olszewski , D. A. Casada , J. Hsu , P. J. Otaduy and L. M. Tolbert "Assessment of methods for estimating motor efficiency, and load under field conditions", Oak Ridge National Laboratory Rep., ORNL/ TM-13165, 1996,
22. Y. El-Ibiary "An accurate low-cost method for determining electric motors’ efficiency for the purpose of plant energy management", IEEE Trans. Ind. Appl., vol. 39, no. 4, pp.1205 -1210 2003
23. B. W. Williams , J. K. Goodfellow and T. C. Green "Sensorless speed measurement of inverter driven squirrel cage induction motors", Proc. IEEE Int. Conf. Power Electron. Variable-Speed Drives, pp.297 -300 1991
24. A. G. Siraki and P. Pillay "An algorithm for non-intrusive in-situ efficiency estimation of induction machines operating with unbalanced supply conditions", IEEE Trans. Ind. Appl., vol. 48, no. 6, pp.1890 -1900 2012, Accepted for publication
25. "Standard method for determining efficiency and losses from tests, Rotating Electrical Machines-part2-1, 2007 (excluding machines for traction vehicles), IEC Standard 60034-2-1, 2007.",
All items in Spectrum are protected by copyright, with all rights reserved. The use of items is governed by Spectrum's terms of access.
Repository Staff Only: item control page
Download Statistics
Download Statistics