Imran Khan, Md., Mostafa, Ahmad 
ORCID: https://orcid.org/0000-0001-5625-1106, Aljarrah, Mohammad, Essadiqi, Elhachimi and Medraj, Mamoun
(2014)
Influence of cooling rate on microsegregation behavior of magnesium alloys.
Journal of materials
.
ISSN 2314-4866
(In Press)
There is a more recent version of this item available.
Preview |
Text (application/pdf)
1MB657647.pdf - Accepted Version Available under License Spectrum Terms of Access. |
Official URL: http://www.hindawi.com/journals/jma/aip/657647/
Abstract
The effect of cooling rate on microstructure and microsegregation of three commercially important magnesium alloys was investigated in the current research. Wedge (‘V’ shaped) castings of AZ91D, AM60B and AE44 alloys were made using a water-cooled permanent copper mold to obtain a range of cooling rates from a single casting. Variation of microstructure and microsegregation was studied using a combination of experiments. Chemical composition of alloying elements at the dendritic length scale and different cooling rates was examined using scanning electron microscopy. Solute redistribution profiles were drawn from the experimentally obtained data. Microstructural and morphological features such as dendrite arm spacing and secondary phase particle size were also analyzed using both optical and scanning electron microscopy. Dendrite arm spacing and secondary phase particle size have an increasing trend with decreasing cooling rate for the three alloys. Area percentage of secondary phase particles decreased with decreasing cooling rate for AE44 alloy. The trend was different for AZ91D and AM60B alloys, for both alloys, area percentage of β-Mg17Al12 increased with decreasing cooling rate up to location 4 and then decreased slightly. The tendency for microsegregation was more severe at slower cooling rates, possibly due to prolonged back diffusion. At slower cooling rate, the minimum concentration of aluminum at the dendritic core was lower compared to faster cooled locations. The segregation deviation parameter and the partition coefficient were calculated from the experimentally obtained data.
| Divisions: | Concordia University > Gina Cody School of Engineering and Computer Science > Mechanical and Industrial Engineering |
|---|---|
| Item Type: | Article |
| Refereed: | Yes |
| Authors: | Imran Khan, Md. and Mostafa, Ahmad and Aljarrah, Mohammad and Essadiqi, Elhachimi and Medraj, Mamoun |
| Journal or Publication: | Journal of materials |
| Date: | 2014 |
| Funders: |
|
| Keywords: | Mg-Alloys, AZ9D1, AM60B, AE44, microsegregation, equilibrium cooling, Scheil-Gulliver model, Brody-Fleming model |
| ID Code: | 978285 |
| Deposited By: | AHMAD MOSTAFA |
| Deposited On: | 24 Feb 2014 14:35 |
| Last Modified: | 18 Jan 2018 17:46 |
References:
[1] A. Boby, U. Pillai, B. Pillai, B. Pai, Developments in Magnesium Alloys for Transport Applications–An Overview, Indian Foundry Journal, 57 (2011) 30.[2] R.S. Beals, C. Tissington, X. Zhang, K. Kainer, J. Petrillo, M. Verbrugge, M. Pekguleryuz, Magnesium global development: Outcomes from the TMS 2007 annual meeting, Journal of the Minerals, Metals and Materials Society, 59 (2007) 39-42.
[3] G. Davies, Materials for automobile bodies, Butterworth-Heinemann, Oxford, 2003.
[4] H. Mao, V. Chandrasekar, M. Murray, C. Mobley, D. Rodrigo, R. Esdaile, J. Brevick, Microstructural characteristics of die cast AZ91D and AM60 magnesium alloys, SAE, 1996.
[5] E. Aghion, B. Bronfin, D. Eliezer, The role of the magnesium industry in protecting the environment, Journal of Materials Processing Technology, 117 (2001) 381-385.
[6] J. Quaresma, C. Santos, A. Garcia, Correlation between unsteady-state solidification conditions, dendrite spacings, and mechanical properties of Al-Cu alloys, Metallurgical and Materials Transactions A, 31 (2000) 3167-3178.
[7] X. Zheng, A. Luo, C. Zhang, J. Dong, R. Waldo, Directional Solidification and Microsegregation in a Magnesium-Aluminum-Calcium Alloy, Metallurgical and Materials Transactions A, 43 (2012) 3239-3248.
[8] D. Mirković, R. Schmid-Fetzer, Directional Solidification of Mg-Al Alloys and Microsegregation Study of Mg Alloys AZ31 and AM50: Part I. Methodology, Metallurgical and Materials Transactions A, 40 (2009) 958-973.
[9] D. Mirković, R. Schmid-Fetzer, Directional Solidification of Mg-Al Alloys and Microsegregation Study of Mg Alloys AZ31 and AM50: Part II. Comparison between AZ31 and AM50, Metallurgical and Materials Transactions A, 40 (2009) 974-981.
[10] C. Zhang, D. Ma, K.S. Wu, H.B. Cao, G.P. Cao, S. Kou, Y.A. Chang, X.Y. Yan, Microstructure and microsegregation in directionally solidified Mg-4Al alloy, Intermetallics, 15 (2007) 1395-1400.
[11] A. Luo, Understanding the solidification of magnesium alloys, in: Proceedings of the Third International Magnesium Conference, Manchester, UK, 1997, pp. 449–464.
[12] D.H. StJohn, A.K. Dahle, T. Abbott, M.D. Nave, M. Qian, Solidification of cast magnesium alloys, in: Proceedings of the Minerals, Metals and Materials Society (TMS), Magnesium Technology, San Diego, CA, 2003, pp. 95–100.
[13] Y.W. Riddle, M.M. Makhlouf, Characterizing solidification by non- equilibrium thermal analysis, in: Proceedings of the Minerals, Metals and Materials Society (TMS), Magnesium Technology, San Diego, CA, 2003, pp. 101–106.
[14] A. Lindemann, J. Schmidt, M. Todte, T. Zeuner, Thermal analytical investigations of the magnesium alloys AM60 and AZ91 including the melting range, Thermochimica Acta, 269 (2002) 381-382.
[15] M. Ohno, D. Mirkovic, R. Schmid-Fetzer, On liquidus and solidus temperature in AZ and AM alloys, in: Proceedings of the Minerals, Metals and Materials Society (TMS),, San Antonio, TX, 2006, pp. 129–132.
[16] M.D. Nave, A.K. Dahle, D.H. StJohn, Eutectic growth morphologies in magnesium-aluminum alloys, in: Proceedings of the Minerals, Metals and Materials Society (TMS), Nashville, TN, 2000, pp. 233–242.
[17] L.P. Barber, Characterization of the solidification behavior and resultant microstructures of magnesium-aluminum alloys, in: Materials Science and Engineering, Worcester Polytechnic Institute, Worcester, MA, 2004.
[18] A.K. Dahle, Y.C. Lee, M.D. Nave, P.L. Schaffer, D.H. StJohn, Development of the as-cast microstructure in magnesium-aluminium alloys, Journal of Light Metals, 1 (2001) 61-72.
[19] S. Barbagallo, H. Laukli, O. Lohne, E. Cerri, Divorced eutectic in a HPDC magnesium-aluminum alloy, Journal of Alloys and Compounds, 378 (2004) 226-232.
[20] M.N. Khan, M. Aljarrah, J.T. Wood, M. Medraj, The effect of cooling rate on thermophysical properties of magnesium alloys, Journal of Materials Research, 26 (2011) 974-982.
[21] L.-Y. Wei, R. Warren, Microstructural characterisation of several magnesium alloys in AM series, Materials Science and Technology, 23 (2007) 745-752.
[22] Q. Han, E. Kenik, S. Agnew, S. Viswanathan, Solidification behaviour of commercial magnesium alloys; Magnesium Technology 2001, 11.-15.02. 2001, New Orleans, The Minerals, Metals & Materials Society, Warrendale, S, (2001) 81-86.
[23] Z. Zhang, A. Couture, R. Tremblay, D. Dube, Microstructure and mechanical properties of permanent mold and die casting of AZ 91 magnesium alloy, in: Light metals-proceedings-Canadian Inst of Mining, Metallurgy and Petroleum, 1999, pp. 397-406.
[24] A. Ditze, K. Schwerdtfeger, Strip casting of magnesium with the single belt process, Scandinavian journal of metallurgy, 32 (2003) 311-316.
[25] S. Guo, Q. Le, Y. Han, Z. Zhao, J. Cui, The effect of the electromagnetic vabration on the microstructure, segregation, and mechanical properties of As-cast AZ80 magnesium alloy billet, Metallurgical and Materials Transactions A, 37 (2006) 3715-3724.
[26] M. Gungor, A statistically significant experimental technique for investigating microsegregation in cast alloys, Metallurgical and Materials Transactions A, 20 (1989) 2529-2533.
[27] J. Sarreal, G. Abbaschian, The effect of solidification rate on microsegregation, Metallurgical and Materials Transactions A, 17 (1986) 2063-2073.
[28] M.C. Flemings, D.R. Poirier, R.V. Barone, H.D. Brody, Microsegregation in Iron Base Alloys, Journal of Iron and steel institute, 208 (1970) 371-381.
[29] M. Martorano, J. Capocchi, Effects of processing variables on the microsegregation of directionally cast samples, Metallurgical and Materials Transactions A, 31 (2000) 3137-3148.
[30] W. Yang, K.-M. Chang, W. Chen, S. Mannan, J. DeBarbadillo, Monte carlo sampling for microsegregation measurements in cast structures, Metallurgical and Materials Transactions A, 31 (2000) 2569-2574.
[31] M. Ganesan, D. Dye, P. Lee, A technique for characterizing microsegregation in multicomponent alloys and its application to single-crystal superalloy castings, Metallurgical and Materials Transactions A, 36 (2005) 2191-2204.
[32] D.R. Poirier, Microsegregation in ternary iron-carbon-chromium alloys, in: Department of Metallurgy, MIT, Cambridge, MA, 1966.
[33] E. Scheil, Bemerkungen zur schichtkristallbildung, Zeitschrift Metallkunde, 34 (1942) 70-72.
[34] T. Clyne, W. Kurz, Solute redistribution during solidification with rapid solid state diffusion, Metallurgical and Materials Transactions A, 12 (1981) 965-971.
[35] T. Bower, H. Brody, M. Flemings, Measurements of solute redistribution in dendritic solidification, Transaction of the Metallurgical Society of AIME, 236 (1966) 624-633.
[36] I. Ohnaka, Mathematical analysis of solute redistribution during solidification with diffusion in solid phase, Transactions of the Iron and Steel Institute of Japan, 26 (1986) 1045-1051.
[37] S. Kobayashi, A Mathematical Model for Solute Redistribution during Dendritic Solidification, Transactions of the Iron and Steel Institute of Japan, 28 (1988) 535-542.
[38] L. Nastac, D.M. Stefanescu, An analytical model for solute redistribution during solidification of planar, columnar, or equiaxed morphology, Metallurgical Transactions A, 24 (1993) 2107-2118.
[39] J. Lacaze, P. Benigni, A. Howe, Some Issues Concerning Experiments and Models for Alloy Microsegregation, Advanced Engineering Materials, 5 (2003) 37-46.
[40] T. Kraft, M. Rettenmayr, H. Exner, An extended numerical procedure for predicting microstructure and microsegregation of multicomponent alloys, Modelling and Simulation in Materials Science and Engineering, 4 (1996) 161-177.
[41] F.Y. Xie, T. Kraft, Y. Zuo, C.H. Moon, Y.A. Chang, Microstructure and microsegregation in Al-rich Al-Cu-Mg alloys, Acta Materialia, 47 (1999) 489-500.
[42] Q. Du, A. Jacot, A two-dimensional microsegregation model for the description of microstructure formation during solidification in multicomponent alloys: Formulation and behaviour of the model, Acta Materialia, 53 (2005) 3479-3493.
[43] W.J. Boettinger, U.R. Kattner, D.K. Banerjee, Analysis of solidification path and microsegregation in multicomponent alloys, in: Thomas BG, Beckermann C. Modelling of Casting, Welding and Advanced Solidification Processed-VIII (1), Warrendale, PA: TMS, 1998, pp. 159-170.
[44] M.C. Flemings, Solidification Processing, McGraw-Hill, 1974.
[45] M.C. Flemings, Solidification processing, Metallurgical and Materials Transactions B, 5 (1974) 2121-2134.
[46] R.M. Kearsey, Compositional effects on microsegregation behaviour in single crystal superalloy systems, in: Mechanical and aerospace engineering, Carleton University, Ottawa, Ontario, 2004.
[47] H. Putz, K. Brandenburg, Pearson’s Crystal Data, Crystal Structure Database for Inorganic Compounds, in, pp. CD-ROM software version.
[48] S. Shang, H. Zhang, S. Ganeshan, Z.-K. Liu, The development and application of a thermodynamic database for magnesium alloys, Journal of the Minerals, Metals and Materials Society, 60 (2008) 45-47.
[49] T.L. Chia, M.A. Easton, S.M. Zhu, M.A. Gibson, N. Birbilis, J.F. Nie, The effect of alloy composition on the microstructure and tensile properties of binary Mg-rare earth alloys, Intermetallics, 17 (2009) 481-490.
[50] F. Hehmann, F. Sommer, B. Predel, Extension of solid solubility in magnesium by rapid solidification, Materials Science and Engineering: A, 125 (1990) 249-265.
Available Versions of this Item
- Influence of cooling rate on microsegregation behavior of magnesium alloys. (deposited 24 Feb 2014 14:35) [Currently Displayed]
All items in Spectrum are protected by copyright, with all rights reserved. The use of items is governed by Spectrum's terms of access.
Repository Staff Only: item control page
Download Statistics
Download Statistics