References:

CAN/CSA S6-14 Canadian Highway Bridge Design Code, Toronto, Ontario, Canada (2014)

AASHTO LRFD Bridge Design Specifications, American Association of State Highway and Transportation Officials, Washington, D.C. (2014)

CEN 1994-2 Eurocode 4 Design of Composite Steel and Concrete Structures - Part 2: General Rules for Bridges. Brussels, Belgium (2005)

CAN/CSA S6-06 Canadian Highway Bridge Design Code, Toronto, Ontario, Canada (2014)

R.G. Slutter, J.W. Fisher. Fatigue strength of shear connectors Highway Research Record no. 147, National Research Council, Washington, D.C. (1966)

ABAQUS Standard User's Manual, Version 6.13, Hibbitt, Karlsson and Sorensen, USA (2013)

P.G. Lee, C.S. Shim, S.P. Chang. Static and fatigue behavior of large stud shear connectors for steel-concrete composite bridges J Constr Steel Res, 61 (9) (2005), pp. 1270-1285

D.L. Mundie. Fatigue Testing and Design of Large Diameter Shear Studs Used in Highway Bridges. M.Sc. Thesis Department of Civil Engineering, Auburn University, USA (2011)

K.N. Smith, P. Watson, T.H. Topper. A stress-strain function for the fatigue of materials J Mater, 5 (4) (1970), pp. 767-778

G. Josi, G.Y. Grondin. Reliability-based management of fatigue failures Structural Engineering Report, 285, Department of Civil and Environmental Engineering, University of Alberta, Edmonton, Canada (2010)

P. Paris, F. Erdogan. A critical analysis of crack propagation laws J Basic Eng, 85 (4) (1963), pp. 528-533

ASTM designation E647 Standard Test Method for Measurement of Fatigue Crack Growth Rates American Society for Testing and Materials, Philadelphia, USA (2000)

J.W. Fisher, P.A. Albrecht, B.T. Yen, D.J. Klingermen, B.M. McNamee. Fatigue strength of steel beams with welded stiffeners and attachments

NCHRP report no. 147, Transportation Research Board, National Research Council, Washington, D.C.(1974)

S.A. Ibrahim, W.W. El-Dakhakhni, M. Elgaaly. Fatigue of corrugated-web plate girders: analytical study J Struct Eng, 132 (9) (2006), pp. 1381-1392

F. Ellyin. Fatigue damage, crack growth and life prediction Chapman & Hall, London, U.K (1997)

H. Chen, G.Y. Grondin, R.G. Driver. Fatigue resistance of high performance steel Structural Engineering Report, 258, Department of Civil and Environmental Engineering, University of Alberta, Edmonton, Canada (2005)

N. Gattesco, E. Giuriani. Experimental study on stud shear connectors subjected to cyclic loading J Constr Steel Res, 38 (1) (1996), pp. 1-21

CAN/CSA-A23.3-14 Design of Concrete Structures Toronto, Ontario, Canada (2014)

E. Ellobody, B. Young, D. Lam. Behavior of normal and high strength concrete-filled compact steel tube circular stub columns J Constr Steel Res, 62 (7) (2006), pp. 706-715

M.M. Mia, A.K. Bhowmick. Static Strength of Headed Shear Stud Connectors Using Finite Element Analysis 6th International Conference on Engineering Mechanics and Materials, Vancouver, BC, Canada (2017) (May 31–June 3)

H.Y. Loh, B. Uy, M.A. Bradford. The effects of partial shear connection in the hogging moment regions of composite beams, part I – experimental study J Constr Steel Res, 60 (2004), pp. 921-962

D. Broek. The practical use of fracture mechanics (2nd ed.), Kluwer Academic Publishers, Netherlands (1989)

H.G. Lehman, H.S. Lew, A.A. Toprac. Fatigue strength of 3/4 inch studs in lightweight concrete Research Report No. 76-1F, Center for Highway. Research, The University of Texas, Austin, Texas(1965)

R.J. Mainstone, J.B. Menzies. Shear connectors in steel concrete composite beams for bridges 1: Static and fatigue test on push-out specimens Concrete (1967), pp. 291-302

M.W. Hallam. The behaviour of stud shear connectors under repeated loading Research Report No, R281, University of Sydney, School of Civil Engineering, Sydney, Australia (1976)

J.W. Roderick, P. Ansorian. Repeated loading of composite beams Civ Eng Trans, 18CE (2) (1976), pp. 109-116

K.K. Lo. Fatigue Testing of Stud Shear Connectors. M. Eng Thesis University of Melbourne (1978)

D.J. Oehlers, L. Foley. The fatigue strength of stud shear connectors in composite beams Proc Inst Civ Eng, Part 2 (79) (1985), pp. 349-364

Y. Maeda, S. Matsui. Effects of concrete placing direction on static and fatigue strengths of stud shear connectors Tech Reports, 33 (1733), Osaka University (October 1983), pp. 397-406

K.C. Naithani, V.K. Gupta, A.D. Gadh. Behavior of shear connectors under dynamic loads Mater Struct, 21 (125) (1988), pp. 359-363

D.J. Oehlers. The Derivation of the Fatigue Endurance of Stud Shear Connections in Composite Steel and Concrete Bridge Beam Department of Civil Engineering. The University of Adelaide (1988)
Report No. R81

T. Faust, A. Leffer, M. Mensinger. Fatigue of headed studs embedded in LWAC LACER No. 4 (1999), pp. 226-230

H. Bode, M. Mensinger, A. Leffer. The shear connection of steel-concrete composite bridges under non-static loading Stahlbau, 70 (4) (2001), pp. 277-286

C.S. Shim, P.G. Lee, S.P. Chang. Design of shear connection in composite steel and concrete bridges with pre-cast decks J Constr Steel Res, 57 (2) (2001), pp. 203-219

S.S. Badie, M.K. Tadros, H.F. Kakish, D.L. Splittgerber, M.C. Baishya. Large shear studs for composite action in steel bridge girders J Bridg Eng, 7 (3) (2002), pp. 195-203

J.H. Ahn, S.H. Kim, Y.J. Jeong. Fatigue experiment of stud welded on steel plate for a new bridge deck system Steel Compos Struct, 7 (5) (2007), pp. 391-404

G. Hanswille, M. Porsch, C. Ustundag. Resistance of headed studs subjected to fatigue loading part I: experimental study J Constr Steel Res, 63 (4) (2007), pp. 475-484