Abstract

This dissertation presents several research outcomes towards designing high-speed CMOS optical receivers for energy-efficient short-reach optical links. First, it provides a wide survey of recently published equalizer-based receivers and presents a novel methodology to accurately calculate their noise. The proposed methodology is then used to find the receiver that achieves the best sensitivity.
Second, the trade-off between sensitivity and power dissipation of the receiver is optimized to reduce the energy consumption per bit of the overall link. Design trade-offs for the receiver, transmitter, and the overall link are presented, and comparisons are made to study how much receiver sensitivity can be sacrificed to save its power dissipation before this power reduction is outpaced by the transmitter’s increase in power. Unlike conventional wisdom, our results show that energy-efficient links require low-power receivers with input capacitance much smaller than that required for noise-optimum performance.
Third, the thesis presents a novel equalization technique for optical receivers. A linear equalizer (LE) is realized by adding a pole in the feedback paths of an active feedback-based wideband amplifier. By embedding the peaking in the main amplifier (MA), the front-end meets the sensitivity and gain of conventional LE-based receivers with better energy efficiency by eliminating the standalone equalizer stage(s). Electrical measurements are presented to demonstrate the capability of the proposed technique in restoring the bandwidth and improving the performance over the conventional design.