Items where Division is "Building, Civil and Environmental Engineering" and Year is 2010

A

Abbadi, Eyad Mahmoud Aref (2010) Phytoextraction of zinc from hydroponic solutions. Masters thesis, Concordia University.

Ahmed, Ali (2010) A Proposal of Design Spectrum Based on Uniform Hazard Spectral Format Using 4th Generation Seismic Hazard Maps of Canada for CHBDC. Masters thesis, Concordia University.

Al-Bahnassi, Homam (2010) Real-time motion planning and simulation of cranes in construction. Masters thesis, Concordia University.

Al-Mashta, Sarmad (2010) Integrated cost budgeting and cost estimation model for building projects. Masters thesis, Concordia University.

B

Behzadian, Farnaz (2010) Evaluation of hydrodynamic characteristics of an integrated multi-environment wastewater treatment system. Masters thesis, Concordia University.

C

Candanedo Ibarra, Luis Miguel (2010) Modelling and evaluation of the performance of building-integrated open loop air-based photovoltaic/thermal systems. PhD thesis, Concordia University.

D

Daneshvar, Poulad (2010) Modeling of tailings flow following a dam breach using smoothed particles hydrodynamics. Masters thesis, Concordia University.

Deeba, Farah (2010) Assessment of SHM Data Integrity by Statistical Pattern Recognition Techniques. Masters thesis, Concordia University.

E

El-Tahan, Mossab Wahba (2010) Applications of new thermoplastic CFRP rebars and mechanically anchored carbon fibre sheets in reinforcing and strenghening concrete beams. Masters thesis, Concordia University.

G

Guo, Jiang (2010) A network-based system for assessment and management of infrastructure interdependency. Masters thesis, Concordia University.

H

Habel, André (2010) Electrokinetic Management of Biosolids for the Inactivation of Helminth Ova. Masters thesis, Concordia University.

Haj-zamani, Sohrab (2010) Effect of curing temperature on hydraulic backfill performance with consideration of a new type of binder. Masters thesis, Concordia University.

Hajizadeh Moghaddam, Azita (2010) Development of a sustainable method for the disposal of chromated copper arsenate (CCA) treated wood. PhD thesis, Concordia University.

Hajra, B., Stathopoulos, T. and Bahloul, A. (2010) Assessment of Pollutant Dispersion from Rooftop Stacks: ASHRAE, ADMS and Wind Tunnel Simulation. Building and Environment, 45 (12). pp. 2768-2777.

Hamidi, Azadeh (2010) Enhancement of the bioremediation of PCE contaminated soil by rhamnolipid and two biological products. Masters thesis, Concordia University.

Han, Sang soo (2010) Use of vanes in sharp bends to improve open-channel flow characteristics : laboratory and numerical experiments. PhD thesis, Concordia University.

J

Jalili, Amina (2010) A hydraulic study of the exchange flow through the Burlington ship canal. Masters thesis, Concordia University.

K

Karim, Rifat Ara (2010) Improvement of lake water quality using sediment resuspension. Masters thesis, Concordia University.

Kristof, Joseph William (2010) A Random Field Model for the Prediction of Changes in the Undrained Shear Strength of Petroleum Contaminated Clay Soils. PhD thesis, Concordia University.

L

Lateb, M., Masson, C., Stathopoulos, T. and Bedard, C. (2010) Numerical Simulation of Pollutant Dispersion around Building Complex. Building and Environment. Building and Environment, 48 (8). pp. 1788-1798.

Li, Song Chun (2010) Modeling and control strategies for radiant floor heating systems. Masters thesis, Concordia University.

M

Mangarulkar, Kiran (2010) Experimental and numerical study of the characteristics of side weir flows. Masters thesis, Concordia University.

Mirzaei Ahranjani, Parham (2010) Systematic Simulation Method to Quantify and Control Pedestrian Comfort and Exposure during Urban Heat Island. PhD thesis, Concordia University.

Mostofi Darbani, Reza (2010) Development of a Procedure to Measure the Effectiveness of Electret N-95 Respirator Filter Media for Capturing Nano-Particles. Masters thesis, Concordia University.

N

Nguyen Ngoc, Hoang (2010) Competitiveness assessment model for construction companies. Masters thesis, Concordia University.

P

Patil, Ratnalee (2010) Impact of Climate Change on an R-2000 and a Net Zero Energy Home. Masters thesis, Concordia University.

R

Ramalingaiah, Thejashree (2010) Removal of suspended solids using in-situ filtration in surface water. Masters thesis, Concordia University.

Rouhieh, Behzad (2010) Multi-Modal Traffic Signal Design under Safety and Operations Constraints. Masters thesis, Concordia University.

S

Salamati Mashhad, Negin (2010) Investigation of Activated Sludge Properties under Different Electrical Field and in the Presence of Calcium. Masters thesis, Concordia University.

Seif Eldin, Hany Mohamed (2010) Rehabilitation of deteriorated steel bridge girders in flexure using CFRP composites. Masters thesis, Concordia University.

Shen, Tian (2010) Modeling the formation and vertical mixing of oil droplets and oil-mineral aggregates (OMAs) under breaking wave conditions. Masters thesis, Concordia University.

Simpson, Ying (2010) Field evaluation of ventilation wetting and drying of rainscreen walls in coastal British Columbia. Masters thesis, Concordia University.

Soliman, Sherif (2010) Performance of reinforced collapsible soils. PhD thesis, Concordia University.

T

Tabara, Wael Elias (2010) Flexible pavement condition-rating model for maintenance and rehabilitation selection. Masters thesis, Concordia University.

Tominaga, Y. and Stathopoulos, T. (2010) Numerical Simulation of Dispersion around an Isolated Cubic Building: Model Evaluation of RANS and LES. Building and Environment. Building and Environment, 45 (10). pp. 2231-2239.

Torkan, Behnam (2010) Development of a protection mechanism for fiber optic sensors in monitoring GFRP reinforced concrete beams. Masters thesis, Concordia University.

Y

Yang, Xiangjin (2010) Investigation on moisture buffering of hygroscopic materials by full-scale experiments and HAM simulations. PhD thesis, Concordia University.

Z

Zaid Ahmed, Mohammed Ridha (2010) Simultaneous removal of benzene and copper from water and wastewater using micellar-enhanced ultrafiltration. Masters thesis, Concordia University.

Zhang, Cheng (2010) Improving crane safety by agent-based dynamic motion planning using UWB real-time location system. PhD thesis, Concordia University.

Zhong, Lexuan, Haghighat, Fariborz, Blondeau, Patrice and Kozinski, Janusz (2010) Modeling and physical interpretation of photocatalytic oxidation efficiency in indoor air applications. Building and Environment, 45 (12). pp. 2689-2697. ISSN 0360-1323

Zisis, I. and Stathopoulos, T. (2010) Wind-induced Pressures on Patio Covers. Journal of Structural Engineering, 136 (9). pp. 1172-1181.