Items where Division is "Mechanical and Industrial Engineering" and Year is 2003

A

Abdelgawad, Mohamed Omar (2003) Numerical simulation of transient performance of viscous micropumps. Masters thesis, Concordia University.

Aboelkassem, Yasser (2003) On the decay of strong concentrated columnar vortices. Masters thesis, Concordia University.

Alam, Nadeem (2003) Quality assurance implementation issues in Canadian firms : a study of ISO 9001:2000. Masters thesis, Concordia University.

Albadawi, Zahir (2003) A mathematical approach for designing cell formation in cellular manufacturing systems. Masters thesis, Concordia University.

An, Libao (2003) Optimization of machining parameters in multi-pass turning and milling operations. Masters thesis, Concordia University.

C

Chen, Jian (2003) Design improvement and development of avionic systems for flight simulators. Masters thesis, Concordia University.

Cheng, Zhong and Paraschivoiu, Marius (2003) Parallel computations of finite element output bounds for conjugate heat transfer. Finite Elements in Analysis and Design, 39 (7). pp. 581-597. ISSN 0168-874X

D

Dharanipathi, Vijayamohan Rao (2003) Investigation of the semi-empirical method for force limited vibration testing. Masters thesis, Concordia University.

E

Elkaied, Ahmed Youssef (2003) Study of hand transmitted vibration from a hand-held rotary power tool. Masters thesis, Concordia University.

G

Gan, Quan (2003) Feasibility investigation of energy regenerative hybrid vehicle suspension system. Masters thesis, Concordia University.

Gupta, Devender Mohan (2003) Mixed integer programming models for supply chain integrated planning. Masters thesis, Concordia University.

I

Immarigeon, Ariane Aimée (2003) Advanced impingement/film-cooling schemes for high-temperature gas turbines : numerical study. Masters thesis, Concordia University.

J

Joarder, Mahmud Niroopam (2003) Influence of nonlinear asymmetric suspension properties on the ride characteristics of road vehicle. Masters thesis, Concordia University.

K

Khalil, Medhat (2003) Performance investigation of the swash plate axial piston pumps with conical cylinder blocks. PhD thesis, Concordia University.

L

Lei, Shenggong (2003) Formulation and mechanical properties of polypropylene nanocomposites. Masters thesis, Concordia University.

Li, Deping (2003) Servo controlled swash plate axil piston pumps operating under variable load demands with application to rolling mills. Masters thesis, Concordia University.

M

Majdalani, Naji (2003) On-board cost effective recording system for enhanced road safety. Masters thesis, Concordia University.

P

Pehlivan, Korhan Kaan (2003) Experimental study on two-phase flow regimes and frictional pressure drop in mini- and micro-channels. Masters thesis, Concordia University.

R

Rodrigues, Luis (2003) Stability analysis using controlled invariant sets for piecewise-affine systems. In: Fourth International Conference on Control and Automation, June 10-12, 2003, Montreal, Canada.

S

Shahbaz, Khosro, Paraschivoiu, Marius and Mostaghimi, Javad (2003) Second order accurate volume tracking based on remapping for triangular meshes. Journal of Computational Physics, 188 (1). pp. 100-122. ISSN 0021-9991

Shen, Zhaohui (2003) Modeling of dynamic friction in vibration environment for heavy vehicle load security. Masters thesis, Concordia University.

T

Tsifourdaris, Panagiota (2003) On the flows developed within the gap of two parallel discs. PhD thesis, Concordia University.

U

Ulysse, Nicolas (2003) Investigation of aircraft yaw motion control. Masters thesis, Concordia University.

V

Venugopal, Shashank M (2003) Stochastic mechanics and reliability of composite laminates based on experimental investigation and stochastic FEM. Masters thesis, Concordia University.

W

Wang, Dongsheng (2003) Advanced development of a dynamic test bed for flight management systems. Masters thesis, Concordia University.

Wang, Jian (2003) Two degree-of-freedom modeling and robust control of chatter in metal cutting by using piezoactuators. Masters thesis, Concordia University.

Wang, Shengmei (2003) Design and developmental studies on a six-degree of freedom endoscopic force/torque sensor. Masters thesis, Concordia University.

Wang, Yang (2003) Adaptive control for frictional and impact chatter in metal cutting via piezoelectric actuator. Masters thesis, Concordia University.

Wu, Liwen (2003) Analysis of hydro-pneumatic interconnected suspension struts in the roll plane vehicle model. Masters thesis, Concordia University.

Y

Yan, Jian (2003) Application of principal component analysis and artificial neural networks in the determination of filler dispersion during polymer extrusion processes. Masters thesis, Concordia University.

Yang, XiuQuan (2003) Aerodynamic loss modelling in transonic turbines /XiuQuan Yang. Masters thesis, Concordia University.

Yao, Ying (2003) Sound transmission through panels using element free Galerkin technique. Masters thesis, Concordia University.

Yu, Xin (2003) Design and optimization of a composite rebar for the reinforcement of concrete. Masters thesis, Concordia University.

Z

Zabihollah, Abolghassem (2003) Vibration and buckling analyses of tapered composite beams using conventional and advanced finite element formulations. Masters thesis, Concordia University.

Zhang, Yuanbei (2003) Development of water simulation system for ultrasonic detection of inclusions in molten metals. Masters thesis, Concordia University.

Zhao, Qi (2003) Mechanical behavior of triaxial woven fabric (TWF) composites. PhD thesis, Concordia University.

Zhu, Kang (2003) Thermorheology of long chain branched metallocene polyethylene. Masters thesis, Concordia University.

Zsaki, Attila, Rixen, Daniel and Paraschivoiu, Marius (2003) A substructure-based iterative inner solver coupled with Uzawa's algorithm for the Stokes problem. International Journal for Numerical Methods in Fluids, 43 (2). pp. 215-230. ISSN 0271-2091