Items where Division is "Mechanical and Industrial Engineering" and Year is 2004

Article

Cheng, Zhong and Paraschivoiu, Marius (2004) A posteriori finite element bounds to linear functional outputs of the three-dimensional Navier-Stokes equations. International Journal for Numerical Methods in Engineering, 61 (11). pp. 1835-1859. ISSN 0029-5981

Thesis

Agrawal, Ankush (2004) Critical success factor and metrics for new product development success. Masters thesis, Concordia University.

Akhavanbazaz, Masoud (2004) Design, analysis, testing and development of a thermoacoustic system for refrigeration applications. Masters thesis, Concordia University.

Al Janaideh, Mohammad Farhan (2004) Hysteresis modeling and experimental verifications of piezoelectric ceramics based actuators. Masters thesis, Concordia University.

Al-Wedyan, Hussien (2004) Control of whirling vibrations in BTA deep hole boring process using fuzzy logic modeling and active suppression technique. PhD thesis, Concordia University.

Ali, A. N. M. Asad (2004) Six sigma design through process optimization using robust design method. Masters thesis, Concordia University.

Anupoju, Chandra Mouli (2004) Tracking control of nonholonomic mechanical systems including actuator dynamics. Masters thesis, Concordia University.

Baghel, Amit (2004) An evaluation of continuous improvement methodologies and performance. Masters thesis, Concordia University.

Bhaskar, Avinash Kuppar (2004) Synthesis of electrostatically actuated optical micromirrors. Masters thesis, Concordia University.

Chen, Lin (2004) Free vibration analysis of tapered composite beams using hierarchical finite element method. Masters thesis, Concordia University.

Chen, Weihua (2004) On-line adaptive control of dynamic systems preceded by hysteresis via neural networks. Masters thesis, Concordia University.

Davaze, Enrique (2004) Investigation of lateral phenomenon in flight control system design. Masters thesis, Concordia University.

Ge, Jianliang (2004) Analysis and testing of MEMS structures subjected to random environment. Masters thesis, Concordia University.

Islam, Farhana (2004) Thermodynamic modeling of Mg-Al-Ca system. Masters thesis, Concordia University.

Jawarneh, Ali (2004) The flow development in jet-driven vortex chambers. PhD thesis, Concordia University.

Jha, Anshuman (2004) Dynamic testing of structures using scale models. Masters thesis, Concordia University.

Jiang, Yijun (2004) A novel method for the manufacturing of thick composites. Masters thesis, Concordia University.

Jokardris, Mandana (2004) Analysis of near-surface flow measurements beneath clean and contaminated wind-driven water surfaces. Masters thesis, Concordia University.

Kar, Sandeep (2004) Rollover prevention of articulated vehicles through predictive warning of impending roll instability. Masters thesis, Concordia University.

Lepage, Claude (2004) A tight two-way fluid-structure coupling for aeroelastic computations in the time domain. PhD thesis, Concordia University.

Li, Jian (2004) Design and development of a piezoelectric linear actuator for smart structures. Masters thesis, Concordia University.

Liu, Zeng Lian (2004) Control and simulation investigation of wing rock phenomenon. PhD thesis, Concordia University.

Lonbani, Siavash Sadri (2004) Design and optimization of a silicon base micro heat exchanger. Masters thesis, Concordia University.

Lu, Jiang (2004) Design of Ethernet based real-time distributed systems. Masters thesis, Concordia University.

Luo, Sheng (2004) Relative performance analyses of articulated vehicles with multiple conventional, liftable and self-steering axles. Masters thesis, Concordia University.

Miao, Zhibin (2004) A generic and intelligent approach of feed rate determination for CNC profile milling. Masters thesis, Concordia University.

Modaressi-Tehrani, Korang (2004) Analysis of transient liquid slosh inside a partly filled tank subjected to lateral and longitudinal acceleration fields. Masters thesis, Concordia University.

Mohamed, Kaveh (2004) Simulation of hydrogen release from a high-pressure chamber considering real gas effects. Masters thesis, Concordia University.

Parvez, MD Anwar (2004) Experimental investigation of the ternary Mg-Al-Sr system. Masters thesis, Concordia University.

Rao, Nakka Purushotham (2004) Design and fabrication of a micromachined tactile sensor for endoscopic graspers. Masters thesis, Concordia University.

Rum, Farshad (2004) Discretized bounded sliding mode control for simulation of differential-algebraic systems. Masters thesis, Concordia University.

Shaker, Vahid (2004) Modelling and simulation of Ethernet based networked mechanical systems. Masters thesis, Concordia University.

Shastri, Mayur Nishikant (2004) Design optimization of fork and join open assembly systems via simulation metamodeling and genetic algorithms. Masters thesis, Concordia University.

Singh, Harpiyar (2004) Design, finite element and experimental analysis of piezoelectric tactile sensors for endoscopic graspers. Masters thesis, Concordia University.

Sun, Xiu Yu (2004) Application of the design structure matrix methodology to the design of a motorized wheel. Masters thesis, Concordia University.

Thangarajah, Thevika (2004) Thermodynamic modeling of the Mg-Al-Sb system. Masters thesis, Concordia University.

Wang, Heng (2004) The study of clay/epoxy nanocomposites : their synthesis, microstructures and properties. Masters thesis, Concordia University.

Wang, Ruiping (2004) A study of vibration isolation of engine mount system. Masters thesis, Concordia University.

Xu, Duosheng (2004) Buckling analysis of tri-axial woven fabric composite structures. PhD thesis, Concordia University.

Yang, Yu Kun (2004) Impulse control of harmonic drive motors for high precision positioning applications. Masters thesis, Concordia University.

Yucui, Bai (2004) A multiobjective mixed integer programming application on the design of a material supply system. Masters thesis, Concordia University.

Zhang, Li (2004) USB based controller interface board design for the Pendubot. Masters thesis, Concordia University.

Zhou, Sheng Feng (2004) Real-time distributed simulation of partial differential equations. Masters thesis, Concordia University.