Login | Register

Items where Division is "Mechanical and Industrial Engineering" and Year is 2006

Group by: Authors | Item Type | No Grouping
Number of items: 56.

Al-Kazzaz, Haider (2006) Nd: YAG laser welding of ZE41A-T5 magnesium sand casting alloy. Masters thesis, Concordia University.

Anwar, M. Arefin (2006) Design, analysis and testing of rotary type micro thermal actuators. Masters thesis, Concordia University.

Arafin, Muhammad A (2006) Transient liquid phase bonding of nickel superalloys and stainless steels : modeling and experimental investigations. Masters thesis, Concordia University.

Balage, Sudantha (2006) Finite element splitting methods applied to incompressible navier-stokes flow solvers and introduction to mixed mass method. Masters thesis, Concordia University.

Basha, Wassim (2006) Accurate drag prediction for transitional external flow over airfoils. Masters thesis, Concordia University.

Bowden, Robert Constantinos (2006) Incipience of two-phase flow from a stratified gas-liquid region in multiple discharging branches : experimental investigation including PIV measurements. Masters thesis, Concordia University.

Chandrasekaran, Arvind (2006) SOI waveguide based optical microsystems for biophotonic enzymatic detection. Masters thesis, Concordia University.

Chatrathi, Kiran Kumar (2006) Microfabrication and characterization of PVDF copolymer thin films suitable for integrating with optical microsystems. Masters thesis, Concordia University.

Chen, Mingbin (2006) Preliminary study of ontology for systematic gathering of product requirements. Masters thesis, Concordia University.

Chintapalli, Sridhar (2006) Preliminary structural design optimization of an aircraft wing-box. Masters thesis, Concordia University.

Chowdhury, Mahabubul Alam (2006) Dynamic performance of heavy vehicles using finite element method. Masters thesis, Concordia University.

Daneshkhah, Kasra (2006) Aerodynamic inverse design of turbomachinery blading in two-dimensional viscous flow. PhD thesis, Concordia University.

Defersha, Fantahun Melaku (2006) An integrated approach in the design of cellular manufacturing systems for dynamic production requirements. PhD thesis, Concordia University.

Dolunay, Burcu (2006) Virtual reality based end-user assessment tool for remote product/system testing and support. Masters thesis, Concordia University.

El Sabbagh, Habib A (2006) A quality assurance model for airborne safety-critical software. Masters thesis, Concordia University.

Gajusingh, Shivani Tara (2006) Influence of surface geometry and heating on the flow structure in wall-bounded flows. Masters thesis, Concordia University.

Gopala Krishnan, Anand (2006) Orbital dynamics analysis and scale model testing of galloping transmission lines. Masters thesis, Concordia University.

Hébert, Paul-André (2006) Development of a dynamic snowmobile model for ride dynamic analysis. Masters thesis, Concordia University.

Huang, Cheng (2006) Rheology of highly filled propylene/ethylene copolymers. Masters thesis, Concordia University.

Ji, Peng (2006) An experimental teletaction system for detection and display of human pulse. Masters thesis, Concordia University.

Kalyanaraman, Rakesh (2006) Nonlinear dynamic analysis of electrostatically actuated MEMS structures. Masters thesis, Concordia University.

Khan, Shahid Hameed (2006) Local gouging detection and tool size determination for 3-axis finish machining of sculptured surface parts. Masters thesis, Concordia University.

Khandaker, Md Forhad (2006) Voice coil actuated variable valve timing system for spark ignition engines. Masters thesis, Concordia University.

Khosh Nejad, Mina (2006) Fuzzy logic based autonomous parallel parking of a car-like mobile robot. Masters thesis, Concordia University.

Kocar, Vildan (2006) Modeling engineering change management process in virtual collaborative design environments. Masters thesis, Concordia University.

Le, Minmin (2006) DSMC simulation of flows in multiple microchannel geometries. Masters thesis, Concordia University.

Liu, Dai Ying (2006) Progressive failure and post-buckling response of tapered composite plates. PhD thesis, Concordia University.

Long, Shun Hong (2006) Active control of shimmy oscillation in aircraft landing gear. Masters thesis, Concordia University.

Ma Xiao, Qing (2006) Dynamic characterization of a magneto-rheological fluid damper and synthesis of a semi-active suspension seat. PhD thesis, Concordia University.

Narayanan Babu, Nagarajan (2006) Annular microfabricated piezoelectric tactile sensor for minimally invasive surgery. Masters thesis, Concordia University.

Nayyar, Karun (2006) Static and modal analyses of laminated composite plates using hierarchical finite element method. Masters thesis, Concordia University.

Patra, Suresh Kumar (2006) Evaluation of passive anthropodynamic manikins intended for laboratory seat testing under vehicular excitations. Masters thesis, Concordia University.

Pawar, Ashish (2006) Analysis of postponement strategies in supply chain. Masters thesis, Concordia University.

Phutthavong, Patricia (2006) Numerical investigation of the unsteady aerodynamics of blade tip leakage flow inside gas turbine engines. Masters thesis, Concordia University.

Rinaldi, Gino (2006) Dynamic analysis and validation of cantilever MEMS subjected to electro-thermo-mechanical influences. PhD thesis, Concordia University.

Rodrigues, Luis and Boukas, El-Kebir (2006) Piecewise-linear controller synthesis with applications to inventory control of switched production systems. Automatica, 42 (8). pp. 1245-1254. ISSN 00051098

Shakeri, Amid (2006) A comparative study of occupant thermal modeling. Masters thesis, Concordia University.

Shehab, Samer (2006) Control of a PWA system cascaded with a nonlinear system : an application to a UAV path following problem. Masters thesis, Concordia University.

Singh, Amandeep (2006) Structural optimization and sensitivity analysis using finite element force method. Masters thesis, Concordia University.

Song Zhu, Qing (2006) Numerical modeling of the cold spray process. Masters thesis, Concordia University.

Soroardy, Jomir Uddin (2006) Numerical investigation of the flow between two stationary parallel discs. Masters thesis, Concordia University.

Tadayoni, Seyyed Alireza (2006) Adaptive control of harmonic drive motors with parameter varying friction using structurally dynamic wavelet networks. Masters thesis, Concordia University.

Thatte, Girish (2006) Development and characterization of self-healing epoxy systems for space applications. Masters thesis, Concordia University.

Vijayakumar, Sujikumar (2006) Fuzzy logic based assignable cause diagnosis using control chart patterns. Masters thesis, Concordia University.

Vineet, Vibhor (2006) Modeling and comparative analysis of a stochastic production planning system with demand uncertainty. Masters thesis, Concordia University.

Wang, Cong Yu (2006) Scale and boundary condition effects on elastic moduli of trabecular bone. Masters thesis, Concordia University.

Wang, Qingqing (2006) Robust adaptive controls of nonlinear systems with actuator hysteresis represented by Prandtl-Ishlinskii models. PhD thesis, Concordia University.

Wang, Wenping (2006) A study of force-motion and vibration transmission properties of seated body under vertical vibration and effects of sitting posture. PhD thesis, Concordia University.

Wang, Yu Feng (2006) Methods for modeling and control of systems with hysteresis of shape memory alloy actuators. PhD thesis, Concordia University.

Xu, Yuan (2006) Enhancement of properties of carbon-fiber-reinforced TGDDM/DDS epoxy composites containing nanoclay. Masters thesis, Concordia University.

Yao, Han (2006) Adaptive neural networks control for unknown flexible joint robots and piezoelectric actuators. Masters thesis, Concordia University.

Yazdi, Daryoosh Bagherzadeh (2006) Scheduling of a computer integrated manufacturing system : a simulation study. Masters thesis, Concordia University.

Yuryev, Yury (2006) Application of atomic force microscopy for the study of crystallization kinetics and morphology of L- and D- polylactide blends in solution cast thin films. Masters thesis, Concordia University.

Zhongyu, Zhao (2006) The study of friction variation with temperature in a harmonic drive system : modeling and control. Masters thesis, Concordia University.

Zhu, Jian Jun (2006) Development of an adaptive contact model for analysis of wheel-rail impact load due to wheel flats. Masters thesis, Concordia University.

Zhu, Yuqing (2006) Nonlinear system identification using a genetic algorithm and recurrent artificial neural networks. Masters thesis, Concordia University.

This list was generated on Sun Oct 13 03:02:26 2024 EDT.
Back to top Back to top