Items where Division is "Mechanical and Industrial Engineering" and Year is 2007

Agrawal, Ashish Kumar (2007) A dynamic programming approach for economic optimization of inspection strategies in a multi-stage manufacturing system. Masters thesis, Concordia University.

Ah kioon, Steve (2007) Comprehensive models and solution procedures for integrated cellular manufacturing systems design. PhD thesis, Concordia University.

Al-Taher, Saeed Raoof (2007) New research on inherent CNC turning errors and its application to accurate tool path generation. Masters thesis, Concordia University.

Alam, Md. Mashiul (2007) Modal characteristics of satellite appendages using on-orbit output-only modal testing. Masters thesis, Concordia University.

Alzaman, Chaher (2007) Modeling, analysis, and design of supply chain networks with the integration of nonlinear Cost of Quality Functions. PhD thesis, Concordia University.

Anandapadmanaban, Balakrishnan (2007) Microstructural changes in aluminum under reversing strains. Masters thesis, Concordia University.

Arumugam, Anandha Kumar (2007) Reliability of center-notched and edge-notched composite laminates based on experimental investigation and stochastic finite element analysis. Masters thesis, Concordia University.

Arzpeyma, Alborz (2007) Numerical investigation of droplet actuation via electrowetting in microchannels. Masters thesis, Concordia University.

Baca Vasquez, Juan Melchor (2007) Optimally tuned secondary system with viscous damping for vibration supression in torsional systems. Masters thesis, Concordia University.

Bonakdar, Ali (2007) Grasping contact analysis of viscoelastic materials for design and development of an endoscopic tactile sensor. PhD thesis, Concordia University.

Bukhari, Syed Junaid Kamran (2007) Investigation of thermal and flow fields above and below the air-water interface during natural convection. PhD thesis, Concordia University.

Chen, Bo (2007) Environment-based design (EBD) approach to enterprise application integration (EAI). Masters thesis, Concordia University.

Chen, Chien-Yu (2007) Lateral-axial coupling and boundary conditioning of vibrating strings and cables. Masters thesis, Concordia University.

Choi, Hae-Won and Paraschivoiu, Marius (2007) Adaptive domain decomposition for the bound method: Application to the incompressible Navier–Stokes and Energy equations in three space dimensions. Computer Methods in Applied Mechanics and Engineering, 196 (8). pp. 1484-1497. ISSN 0045-7825

Cuevas Gutiérrez, Carlos Cuauhtémoc (2007) Modeling and experimental validation of an ultrasonic rotary motor. PhD thesis, Concordia University.

Dang, Minh Nhat (2007) A study on two-phase flow characteristics in cross-linked microchannel heat sinks. Masters thesis, Concordia University.

Dong, Jianhui (2007) Distributed biodynamic response analysis of the hand-arm system exposed to vibration along the forearm direction. Masters thesis, Concordia University.

Esfarjani, Sanaz Arabzadeh (2007) Numerical simulation of two-phase flow in an effervescent atomizer for nano-suspension spray. Masters thesis, Concordia University.

Floarea, George (2007) XeF2 gas phase micromachininig of silicon: modeling, equipment development and verification. Masters thesis, Concordia University.

Hasan, Shadi (2007) Rheology of heavy crude oil and viscosity reduction for pipeline transportation. Masters thesis, Concordia University.

Hobbi, Alireza (2007) Design of solar water heating systems for cold climate and study of heat transfer enhancement devices in flat-plate solar collectors. Masters thesis, Concordia University.

Hu, Shilian (2007) Surface finish analysis of composite automotive panels. PhD thesis, Concordia University.

Hu, Xiao Xia (2007) Numerical analysis of near-surface flow beneath small-scale wind driven water waves. Masters thesis, Concordia University.

Huang, Guogui (2007) Parametric modelling of APT cutters and accurate calculation of their area moments of inertia. Masters thesis, Concordia University.

Islam, Md. Mezbahul (2007) Thermodynamic modeling of the Mg-Cu-Y system. Masters thesis, Concordia University.

Kadam, Sagar Chandrakant (2007) Static and dynamic analysis of twist drills subjected to cutting loads. Masters thesis, Concordia University.

Kameshki, Mohammad Reza (2007) Simulation of hydrogen jet exiting a high pressure reservoir. Masters thesis, Concordia University.

Karimi, Mohammad (2007) Large Eddy Simulation (LES) of turbulent flows in gas turbine. Masters thesis, Concordia University.

Khosravi, Peyman (2007) Nonlinear finite element analysis and design optimization of thin-walled structures. PhD thesis, Concordia University.

LeBel, Stefan (2007) Path following control of wheeled mobile robots combining piecewise-affine, linear parameter-varying, and backstepping theories. Masters thesis, Concordia University.

Li, Yunqiang (2007) Modeling and testing of static and dynamic behavior of MEMS deformable microstructures with multiple electrodes. Masters thesis, Concordia University.

Li, Zheng (2007) Visual servoing in robotic manufacturing systems for accurate positioning. Masters thesis, Concordia University.

Liu, Gang (2007) Automated cutter size and orientation determinations for multi-axis sculptured part milling. Masters thesis, Concordia University.

Mirbagheri, Ashkan (2007) Design, modeling, fabrication and testing of a membrane piezoelectric tactile sensor with four sensing elements. Masters thesis, Concordia University.

Molavi Zarandi, Marjan (2007) Determination of mechanical properties of individual living cells. Masters thesis, Concordia University.

Mostafid, Ali M (2007) Entrance and exit effects on flow through metallic foams. Masters thesis, Concordia University.

Movassat, Mohammad (2007) Numerical study of primary breakup of liquid sheets. Masters thesis, Concordia University.

Muwanga, Roland Ssonko (2007) Experimental study on heat transfer characteristics of microchannel systems using liquid crystal thermography. PhD thesis, Concordia University.

Ngo, Tri-Dung (2007) Understanding the effect of adding nanoclays into epoxies. PhD thesis, Concordia University.

Othman, Mohammed (2007) Development of a dynamic seating system for high-tone extensor thrust phenomenon using the design structure matrix method. Masters thesis, Concordia University.

Pendyala, Srinivasa Raghavendra (2007) Modeling, analysis and testing of an electrostatically actuated waveguide based optical MEMS device for variable optical attenuation. Masters thesis, Concordia University.

Qasaimeh, Mohammad Ameen Yousef (2007) Polyvinylidene fluoride - based MEMS tactile sensor for minimally invasive surgery. Masters thesis, Concordia University.

Rababah, Mahmoud (2007) Damage tolerance analysis using the eXtended finite element method. Masters thesis, Concordia University.

Rafat, Yasser (2007) Ride dynamic analysis of guided pneumatic-tired subway car. Masters thesis, Concordia University.

Rajagopalan, Srivatsan Vengeepuram (2007) Numerical analysis of a high velocity oxygen fuel (HVOF) process. Masters thesis, Concordia University.

Raza, Syed Asif (2007) Optimal pricing and seat allocation in the airline industry under the market competition. PhD thesis, Concordia University.

Rodrigues, Luis (2007) Stability of sampled-data piecewise-affine systems under state feedback. Automatica, 43 (7). pp. 1249-1256. ISSN 00051098

Salam, Adil Muhammad (2007) A parametric model to estimate design effort in product development. Masters thesis, Concordia University.

Sanyal, Joydip (2007) Dynamic response of geared shaft systems with time-dependent boundary conditions subjected to static transmission error. Masters thesis, Concordia University.

Shahsavari, Mohammad Reza (2007) Flow analysis of an existing Hawker airframe using Tranair. Masters thesis, Concordia University.

Sikdar, Sumit Kanti (2007) Machinability of nickel based superalloys with carbide and ceramic tools in milling. PhD thesis, Concordia University.

Sokhanvar, Saeed (2007) Micromachined multifunctional polyvinylidene fluoride tactile sensor for minimally invasive surgery graspers. PhD thesis, Concordia University.

Yao, Shengji (2007) Experimental approaches for understanding conceptual design activities. PhD thesis, Concordia University.

Zabihollah, Abolghassem (2007) Analysis, design optimization and vibration suppression of smart laminated beams. PhD thesis, Concordia University.

Zhang, Hongda (2007) Optimal cutter size determination for finish pocketing of NURBS profile parts. Masters thesis, Concordia University.

Zhang, Wen (2007) Production planning in a multi-product manufacturing environment using constant work-in-process. PhD thesis, Concordia University.

Zhao, Tianbo (2007) An approach to feed rate determination for high-speed machining of 2-D NURBS profiles. Masters thesis, Concordia University.