Items where Division is "Mechanical, Industrial and Aerospace Engineering" and Year is 2024

Abdali, Marjan (2024) Mechanical Performance of Foam-Infilled 3D-Printed Corrugated Core Sandwich Panels: Experimental and Numerical. Masters thesis, Concordia University.

Adams-Gillstrom, Karl (2024) Development and Characterization of a Novel Hybrid Magnetorheological Elastomer. Masters thesis, Concordia University.

Ahmad, Muhammad (2024) A First Principles Study on The Effect of Hydrogen on The Electrical Properties of BCC Fe. Masters thesis, Concordia University.

Akinpelu, Temitope (2024) Impact noise reduction in cross laminated timber by embedding acoustic black holes. Masters thesis, Concordia University.

Alam, M. and Kwok, T.H. (2024) Multidisciplinary optimization of shoe midsole structures using swarm intelligence. Structural and Multidisciplinary Optimization, 67 (8). ISSN 16151488 1615147X

Amrollahybiouki, Saeid (2024) Flash Boiling Atomization of Suspension for Application of Suspension Plasma Spraying. PhD thesis, Concordia University.

Bernier-Tremblay, Camille (2024) Influence of Process Parameters on Microstructural Characteristics and Mechanical Properties of Ti-6Al-4V Samples Manufactured through Electron Beam Melting Manufacturing. Masters thesis, Concordia University.

Derayatifar, Mahdi (2024) Holographic direct sound printing. PhD thesis, Concordia University.

Diop, Sokhna Awa Bousso (2024) The in-flight oxidation of MCrAlY particles in the HVAF process: A numerical study. Masters thesis, Concordia University.

Doroudian, Erfan (2024) Integrating Vision-Language Models with Reinforcement Learning for Human-Aligned Decision-Making of Autonomous Vehicles. Masters thesis, Concordia University.

Fakhimi, Emad (2024) 4D Printing of Composites: Fundamental Understanding and Applications. PhD thesis, Concordia University.

Fan, Jingyu (2024) Free-Energy Based Modeling of Planar Dielectric Elastomer Actuators. Masters thesis, Concordia University.

Farid, Mina (2024) Advancements in Photocured Graphene-Oxide Coatings: Enhancing Tribological Performance through Liquid Crystal Technologies. Masters thesis, Concordia University.

Fasihanifard, Mohammadreza ORCID: https://orcid.org/0009-0007-7957-0530 (2024) Design and Verification of Optomechanical Actuation for Tunable Filters. PhD thesis, Concordia University.

Fereidouni, Mahmoud (2024) Address to a few issues in thermoplastic composites made by automated fiber placement: Defect identification, temperature measurement, and model for tape width increase. Masters thesis, Concordia University.

Filler, Tzvi (2024) Real Time Control of a Weed Removal Rover Through Visual Servoing. Masters thesis, Concordia University.

Ghani, Ehsan (2024) Failure and Reliability Analysis of Composite Pipes for Oil and Gas Drilling Applications. Masters thesis, Concordia University.

Ghiasvand, Shayan (2024) Image Moment-based Visual Servoing for Satellite Target Tracking using a Robotic Manipulator. Masters thesis, Concordia University.

Gosselin, Karine (2024) Process Mapping for Interdisciplinary Aerospace Processes: A Case Study. Masters thesis, Concordia University.

Hajimoradi, Afrouz (2024) Modelling, Design Optimization and Control of Magnetorheological Dampers for Prosthetic Applications. Masters thesis, Concordia University.

Hamedi, Mohsen (2024) Gradient-Free Aeroacoustic Shape Optimization Using High-Order Implicit Large Eddy Simulation. PhD thesis, Concordia University.

Hedayatnasab, Yasaman (2024) Automated Fiber Placement for Dome-Type Structures Using Dual Robots. Masters thesis, Concordia University.

Kermanian, Niki (2024) Atomistic Simulations of Next-generation Durable Aerospace Materials: A Comparison between Nickel and Cobalt Oxides. Masters thesis, Concordia University.

Khalilpourazari, Soheyl (2024) Advanced Stochastic Programming and Machine Learning Models for Healthcare Planning, Scheduling, and Prediction Problems. PhD thesis, Concordia University.

Khodaei, Arash ORCID: https://orcid.org/0000-0001-5106-7553 (2024) Experimental and Theoretical Study of Vibration-Assisted Thermal Bonding of Thermoplastic Composites. PhD thesis, Concordia University.

Khoshrou, Ali (2024) Displacement and Stress Computation in Dual-Horizon State-Based Peridynamics. Masters thesis, Concordia University.

Kolip, Enes (2024) Improving Model-Based System Architecture Specification to Enable Fault Tree Analysis. Masters thesis, Concordia University.

Lawrence, Jaguar (2024) Tribological Evaluation of Polymer Matrix Composites for Green Alternative Replacement in Alpine Sports: Scaling up between Laboratory and Field Testing. Masters thesis, Concordia University.

Liang, Zhenshan (2024) Indoor Depth Map Completion via Mesh-based Discrete Geometric Processing. Masters thesis, Concordia University.

Licheva, Gala (2024) Parametric Hydrogen Tank Sizing Model for Aircraft Conceptual Design. Masters thesis, Concordia University.

Linhan, Qiao (2024) Visual-Infrared Aerial Image Based Wildfire Intelligent Perception. PhD thesis, Concordia University.

Madabadi, Nezhla (2024) Development of Polymeric Abradable Coatings for Aero Engine Applications. Masters thesis, Concordia University.

Mahmoudzadeh Vaziri, Shabnam (2024) Exact Algorithms for Network Fortification and Design Problems under Stochastic Interdiction. PhD thesis, Concordia University.

Martinez, Carlos (2024) Molecular Dynamics-Based Study of the Effect of Hydrogen on the Mechanical Properties of Fe-C System. Masters thesis, Concordia University.

Masoodi Nia, Marzieh (2024) Adaptive Correction Strategy in Robotic Gas Tungsten Arc Welding for Additive Manufacturing. Masters thesis, Concordia University.

Moezi, Seyed Alireza, Sedaghati, Ramin and Rakheja, Subhash (2024) Development of a novel nonlinear model and control strategy for soft continuum robots featuring hard magnetoactive elastomers. Smart Materials and Structures .

Moezi, Seyed Alireza, Sedaghati, Ramin and Rakheja, Subhash (2024) An Experimental Study on the Dynamic Hysteresis Behavior of a Magnetic Soft Continuum Robot Submerged in a Fluid Environment.

Moezi, Seyed Alireza, Sedaghati, Ramin and Rakheja, Subhash (2024) Nonlinear dynamic modeling and model-based AI-driven control of a magnetoactive soft continuum robot in a fluidic environment. ISA Transactions: The Journal of Automation .

Nasr, Elie (2024) Increase in Liposome Production: From Microfluidics to Milli-fluidics. Masters thesis, Concordia University.

Nouraei Ashtiani, Parinaz (2024) Moisture Diffusion and its Effect on Performance of Thermoplastic Composite Sandwich Panels with Recycled PET Foam Cores. Masters thesis, Concordia University.

Raju, Duraichelvan (2024) Enhanced Diagnosis of Breast Cancer through Detection of Exosomes using ex-situ, in-situ, and Solid State Dewetted Nanoplasmonic Platforms. PhD thesis, Concordia University.

Rangriz, Sina (2024) Optimization of airfoils and wing planforms for airborne wind energy applications. Masters thesis, Concordia University.

Rasidescu, Victor (2024) Socially Aware Path Planning For Autonomous Road Vehicles. Masters thesis, Concordia University.

Rezaei, Farshad ORCID: https://orcid.org/0000-0001-7446-5626 (2024) Study of Roof-Mounted Vertical Axis Wind Turbines in Different Environments. PhD thesis, Concordia University.

Safizadeh, Sara (2024) Understanding Crack Formation in IN738 Alloy Fabricated by Laser Powder Bed Fusion and Heat Treatment Process. Masters thesis, Concordia University.

Saikat, Istiak Mahmud (2024) Effect of Water Vapor and Hydrogen Exposure on Tribological Performance of Inconel 718 for Next-Generation Gas Turbine Engine. Masters thesis, Concordia University.

Sattari, Mohammadali (2024) Dynamic Properties of Bimodal Polyethylene: Crystallization and Flow Instabilities. PhD thesis, Concordia University.

Scattolin, Clara (2024) Shape Control and Residual Stresses Management in Carbon Fiber Reinforced Thermoplastic Structures Manufactured Using Automated Fiber Placement. Masters thesis, Concordia University.

Vakada, Murali Krishna (2024) Evaluating Infrastructure Demand and Optimizing Charging Strategies for Battery Electric Bus Fleet - A Pilot Study on Concordia Shuttle Fleet. Masters thesis, Concordia University.

Zhu, Ningyu (2024) Trajectory Planning and Control of Cooperative Robotic System for Automated Fiber Placement. PhD thesis, Concordia University.