References:

[1] K. Bertuol, B.E. Arendarchuck, P. Stoyanov, An Overview of Metallic Abradable Coatings in Gas Turbine Engines, Coatings 15 (2025) 1216. https://doi.org/10.3390/coatings15101216.
[2] K. Bertuol, F.E. Rivadeneira, R.B. Nair, C. Moreau, P. Stoyanov, Advancing Abradable Evaluation: A Comprehensive Review and Development of an Innovative Cost-Effective Methodology, in: Proceedings of the 27th International Congress of Mechanical Engineering, ABCM, 2023. https://doi.org/10.26678/ABCM.COBEM2023.COB2023-0143.
[3] K. Bertuol, B.E. Arendarchuck, F.R.E. Rivadeneira, B.C.N.M. de Castilho, C. Moreau, P. Stoyanov, Design and Development of Cost-Effective Equipment for Tribological Evaluation of Thermally Sprayed Abradable Coatings, J Therm Spray Tech 34 (2024) 852–865. https://doi.org/10.1007/s11666-024-01830-3.
[4] K. Bertuol, F.R.E. Rivadeneira, R.B. Nair, B. Barnett, C. Moreau, P. Stoyanov, Influence of hBN on the abradable performance of AlSi-based coatings: Bridging the gap between tribological assessment and abradability testing, Surface and Coatings Technology 489 (2024) 131060. https://doi.org/10.1016/j.surfcoat.2024.131060.
[5] K. Bertuol, F. Rivadeneira, B. Arendarchuck, R.B. Nair, B. Barnett, C. Moreau, P. Stoyanov, Effect of Mo and Cr on abradability and tribological performance of AlSi-based abradable coatings, Wear 571 (2025) 205837. https://doi.org/10.1016/j.wear.2025.205837.
[6] K. Bertuol, B. Arendarchuck, F. Rivadeneira, L. Nolte, M. Lehner, B. Barnett, C. Moreau, P. Stoyanov, Assessment of AlSi-Based Abradable Coatings with hBN and MoCr Additives for Aerospace Conditions: A Novel High-Temperature Rig Approach, Aerospace Science and Technology (2025) 110737. https://doi.org/10.1016/j.ast.2025.110737.
[7] J. Huang, X. Cao, W. Chen, X. Guo, M. Li, W. Wang, S. Dong, L. Liu, M. Chen, A comprehensive review of thermally sprayed abradable sealing coatings: Focusing on abradability, Chinese Journal of Aeronautics 37 (2024) 1–25. https://doi.org/10.1016/j.cja.2024.08.014.
[8] B. Berthoul, A. Batailly, M. Legrand, L. Stainier, P. Cartraud, Abradable Coating Removal in Turbomachines: A Macroscopic Approach Accounting for Several Wear Mechanisms, in: Volume 7B: Structures and Dynamics, American Society of Mechanical Engineers, Montreal, Quebec, Canada, 2015: p. V07BT32A012. https://doi.org/10.1115/GT2015-42500.
[9] D. Sporer, S. Wilson, P. Fiala, R. Schuelein, Thermally Sprayed Abradable Coatings in Steam Turbines: Design Integration and Functionality Testing, in: Volume 7: Turbomachinery, Parts A, B, and C, ASMEDC, Glasgow, UK, 2010: pp. 2309–2317. https://doi.org/10.1115/GT2010-23568.
[10] M.R. Dorfman, G. Dwivedi, C. Dambra, S. Wilson, Perspective: Challenges in the Aerospace Marketplace and Growth Opportunities for Thermal Spray, J Therm Spray Tech 31 (2022) 672–684. https://doi.org/10.1007/s11666-022-01351-x.
[11] S. Lattime, B. Steinetz, High-Pressure-Turbine Clearance Control Systems: Current Practices and Future Directions, Journal of Propulsion and Power - J PROPUL POWER 20 (2004) 302–311. https://doi.org/10.2514/1.9255.
[12] Oerlikon Metco, Abradable Seals for Compressors and Low/High Pressure Turbines, (n.d.). https://www.oerlikon.com/metco/en/markets/aerospace/compressors/ (accessed August 1, 2025).
[13] F. Mohammad, M. Mudasar, A. Kashif, Criteria for Abradable Coatings to Enhance the Performance of Gas Turbine Engines, J Mate Sci Metall 2 (2021). https://article.scholarena.com/Criteria-for-Abradable-Coatings.pdf.
[14] Noel Paul Hopkins, Abradable coatings - From black art to materials science, Thesis, 2007. https://cronfa.swan.ac.uk/Record/cronfa42844.
[15] R.E. Chupp, F. Ghasripoor, N.A. Turnquist, M. Demiroglu, M.F. Aksit, Advanced Seals for Industrial Turbine Applications: Dynamic Seal Development, Journal of Propulsion and Power 18 (2002) 1260–1266. https://doi.org/10.2514/2.6061.
[16] Oerlikon Metco, Thermally sprayed abradable coating technology for sealing in gas turbines, in: 6th International Conference, Brussels, Belgium, 2012.
[17] A. Dadouche, M.J. Conlon, W. Dmochowski, B. Liko, J.-P. Bedard, Experimental Evaluation of Abradable Seal Performance at High Temperature, in: Volume 5: Structures and Dynamics, Parts A and B, ASMEDC, Berlin, Germany, 2008: pp. 143–150. https://doi.org/10.1115/GT2008-51228.
[18] D. Aussavy, Processing characterization and modeling of thermomechanical properties of threee abradable coatings: NiCrAl-bentonite, CoNiCrAlY-BN-polyester, and YSZ-polyester, Materials, Université de Technologie de Belfort-Montbeliard, 2016.
[19] R.K. Schmid, F. Ghasripoor, M. Dorfman, X. Wei, An Overview of Compressor Abradables, in: Proceedings of the 1st International Thermal Spray Conference, ITSC 2020, Montreal, Quebec, Canada, 2000: pp. 1087–1093. https://doi.org/10.31399/asm.cp.itsc2000p1087.
[20] Oerlikon Metco, Thermal Spray Materials Guide, in: 2015. https://www.ahtstlab.com/wp-content/uploads/2021/05/ThermalSprayMaterialsGuide.pdf.
[21] Oerlikon Metco, Atmospheric Plasma Spray Solutions, in: 2022.
[22] L. Pawłowski, The science and engineering of thermal spray coatings, 2nd ed, Wiley, Chichester, England ; Hoboken, NJ, 2008.
[23] P. Jadhav, Abradable coatings: Design through microstructure based models, Materials Today: Proceedings 62 (2022) 7353–7357. https://doi.org/10.1016/j.matpr.2022.02.021.
[24] R.E. Johnston, The Sensitivity of Abradable Coating Residual Stresses to Varying Material Properties, J Therm Spray Tech 18 (2009) 1004–1013. https://doi.org/10.1007/s11666-009-9378-2.
[25] J. Liu, Y. Yu, T. Liu, X. Cheng, J. Shen, C. Li, The Influence of Composition and Microstructure on the Abradability of Aluminum-Based Abradable Coatings, J Therm Spray Tech 26 (2017) 1095–1103. https://doi.org/10.1007/s11666-017-0526-9.
[26] M.O. Borel, A.R. Nicoll, H.W. Schla¨pfer, R.K. Schmid, The wear mechanisms occurring in abradable seals of gas turbines, Surface and Coatings Technology 39–40 (1989) 117–126. https://doi.org/10.1016/0257-8972(89)90046-7.
[27] S. Yang, S. Gao, W. Xue, B. Wu, J. Zhang, D. Duan, High-Speed Rubbing Behavior Between Nickel-Based Superalloy Blades and Ceramic-Based Abradable Coatings, Tribol Lett 71 (2023) 128. https://doi.org/10.1007/s11249-023-01798-1.
[28] Q.Y. Lu, J. Shen, Y.G. Yu, X.J. Ren, H.J. Xuan, T. Liu, Progress on Facilities and Methodology to Evaluate Abradable Seal Coatings, AMR 690–693 (2013) 1992–1998. https://doi.org/10.4028/www.scientific.net/AMR.690-693.1992.
[29] R.C. Bill, J. Wolak, D.W. Wisander, Effects of geometric variables on rub characteristics of Ti-6Al-4V, (1981). https://ntrs.nasa.gov/citations/19810011717 (accessed October 3, 2024).
[30] Oerlikon Metco, Rapid Validation of Turbomachinery Abradable Systems Using Oerlikon Metco’s Rub-Test Facility, in: SF-0029.0 – Abradable Testing, 2020.
[31] E. Irissou, A. Dadouche, R.S. Lima, Tribological Characterization of Plasma-Sprayed CoNiCrAlY-BN Abradable Coatings, J Therm Spray Tech 23 (2014) 252–261. https://doi.org/10.1007/s11666-013-9998-4.
[32] E. Rahimov, M. Watson, A. Hadjisoteriou, M. Marshall, Investigation of wear mechanisms in AlSi-polyester abradable - Ti(6Al4V) blade contacts using stroboscopic imaging, Wear 494–495 (2022) 204207. https://doi.org/10.1016/j.wear.2021.204207.
[33] Padova, Jeffrey Barton, Michael G. Dunn, Steve Manwaring, Gamaliel Young, Maurice Adams, Jr. Michael Adams, Development of an Experimental Capability to Produce Controlled Blade Tip/Shroud Rubs at Engine Speed, ASME American Society of Mechanical Engineers (2005).
[34] H. Ma, F. Yin, Y. Guo, X. Tai, B. Wen, A review on dynamic characteristics of blade–casing rubbing, Nonlinear Dyn 84 (2016) 437–472. https://doi.org/10.1007/s11071-015-2535-x.
[35] N. Langenbrunner, M. Weaver, M.G. Dunn, C. Padova, J. Barton, Dynamic Response of a Metal and a CMC Turbine Blade During a Controlled Rub Event Using a Segmented Shroud, (2014).
[36] R. Mandard, J.-F. Witz, X. Boidin, J. Fabis, Y. Desplanques, J. Meriaux, Interacting force estimation during blade/seal rubs, Tribology International 82 (2015) 504–513. https://doi.org/10.1016/j.triboint.2014.01.026.
[37] NASA, Technology Readiness Levels - NASA, (2023). https://www.nasa.gov/directorates/somd/space-communications-navigation-program/technology-readiness-levels/ (accessed August 14, 2025).
[38] U. Rathmann, S. Olmes, A. Simeon, Sealing Technology: Rub Test Rig for Abrasive/Abradable Systems, in: American Society of Mechanical Engineers Digital Collection, 2009: pp. 223–228. https://doi.org/10.1115/GT2007-27724.
[39] F. Ghasripoor, R.K. Schmid, M.R. Dorfman, L. Russo, A Review of Clearance Control Wear Mechanisms for Low Temperature Aluminium Silicon Alloys, in: C. Coddet (Ed.), Nice, France, 1998: pp. 139–144. https://doi.org/10.31399/asm.cp.itsc1998p0139.
[40] M.W. Smiarowski, R. Leo, C. Scholten, J. Blake, Steam Turbine Modernization Solutions Provide a Wide Spectrum of Options to Improve Performance, Siemens Power Generation (2005).
[41] M.O. Borel, A.R. Nicoll, H.W. Schla¨pfer, R.K. Schmid, The wear mechanisms occurring in abradable seals of gas turbines, Surface and Coatings Technology 39–40 (1989) 117–126. https://doi.org/10.1016/0257-8972(89)90046-7.
[42] M. Bounazef, S. Guessasma, B. Ait Saadi, The wear, deterioration and transformation phenomena of abradable coating BN–SiAl–bounding organic element, caused by the friction between the blades and the turbine casing, Materials Letters 58 (2004) 3375–3380. https://doi.org/10.1016/j.matlet.2004.02.049.
[43] C.U. Hardwicke, Y.-C. Lau, Advances in Thermal Spray Coatings for Gas Turbines and Energy Generation: A Review, J Therm Spray Tech 22 (2013) 564–576. https://doi.org/10.1007/s11666-013-9904-0.
[44] J.T. DeMasi-Marcin, D.K. Gupta, Protective coatings in the gas turbine engine, Surface and Coatings Technology 68–69 (1994) 1–9. https://doi.org/10.1016/0257-8972(94)90129-5.
[45] N. Fois, M. Watson, M. Marshall, The influence of material properties on the wear of abradable materials, Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 231 (2017) 240–253. https://doi.org/10.1177/1350650116649528.
[46] R.E. Chupp, R.C. Hendricks, S.B. Lattime, B.M. Steinetz, M.F. Aksit, Turbomachinery Clearance Control, 2007. https://ntrs.nasa.gov/citations/20070005016 (accessed August 20, 2024).
[47] FELTMETALTM Abradable Seals - Technetics, Technetics Group (n.d.). https://technetics.com/resources/video-library/?wchannelid=6dz3bth5yd&wmediaid=g08vko9zm3 (accessed July 1, 2025).
[48] E. Scrinzi, I. Giovannetti, N. Sheng, L. Leblanc, Development of New Abradable/Abrasive Sealing Systems for Clearance Control in Gas Turbines, in: ASME 2013 Turbine Blade Tip Symposium, American Society of Mechanical Engineers, Hamburg, Germany, 2013: p. V001T05A004. https://doi.org/10.1115/TBTS2013-2065.
[49] A. Behera, K.K. Saxena, D.K. Rajak, S. Sehgal, Multi-scale and Multifunctional Coatings and Interfaces for Tribological Contacts, 1st ed., CRC Press, Boca Raton, 2025. https://doi.org/10.1201/9781032635347.
[50] R.S. Lima, B.R. Marple, A. Dadouche, W. Dmochowski, B. Liko, Nanostructured Abradable Coatings for High Temperature Applications, in: B.R. Marple, M.M. Hyland, Y.-C. Lau, R.S. Lima, J. Voyer (Eds.), Seattle, Washington, USA, 2006: pp. 775–780. https://doi.org/10.31399/asm.cp.itsc2006p0775.
[51] N. Madabadi, Development of Polymeric Abradable Coatings for Aero Engine Applications, Thesis, Concordia University, 2024. https://spectrum.library.concordia.ca/id/eprint/995037/.
[52] D. Sporer, S. Wilson, I. Giovannetti, A. Refke, M. Giannozzi, On The Potential of Metal and Ceramic Based Abradables in Turbine Seal Applications, in: Proceedings of the 36th Turbomachinery Symposium, 2007. https://hdl.handle.net/1969.1/163146.
[53] L. Wang, S. Wang, G. Chen, Y. Zou, S. Yu, E. Xie, Q. Zhao, Z. Ye, J. Ouyang, Y. Wang, D. Jia, Y. Zhou, Ceramic-based abradable sealing coatings for advanced aeroengines: Materials design, structural strategies, and multifunctional performance, Extreme Materials (2025) S3050628X25000425. https://doi.org/10.1016/j.exm.2025.08.003.
[54] R. Flitney, Rotary Seals, in: Seals and Sealing Handbook, Elsevier, 2014: pp. 105–288. https://doi.org/10.1016/B978-0-08-099416-1.00003-6.
[55] S. Wilson, Abradable Thermal Spray Applications and Technology, ASM Handbook, Volume 5A, Thermal Spray Technology (2013). https://doi.org/10.31399/asm.hb.v05a.a0005738.
[56] Y.-Q. Tong, Q.-S. Shi, M.-J. Liu, G.-R. Li, C.-J. Li, G.-J. Yang, Lightweight epoxy-based abradable seal coating with high bonding strength, Journal of Materials Science & Technology 69 (2021) 129–137. https://doi.org/10.1016/j.jmst.2020.05.077.
[57] Y.-Q. Tong, W. Li, Q.-S. Shi, L. Chen, G.-J. Yang, Self-lubricating epoxy-based composite abradable seal coating eliminating adhesive transfer via hierarchical design, Journal of Materials Science & Technology 104 (2022) 145–154. https://doi.org/10.1016/j.jmst.2021.07.017.
[58] M. Ghorban, P. Stoyanov, R.S. Lima, A Comprehensive Review of High-Temperature Ceramic Abradable Coatings Used in Aero and Industrial Gas Turbines, in: Vancouver, Canada, 2025: pp. 120–128. https://doi.org/10.31399/asm.cp.itsc2025p0120.
[59] A. Baillieu, E. Rahimov, M. Marshall, The role of thermal properties in the wear mechanisms of an AlSi-polyester abradable, Wear 562–563 (2025) 205618. https://doi.org/10.1016/j.wear.2024.205618.
[60] R. Lye, A. Pellegrino, C. Bennett, J. Rouse, P. Agyakwa, G. Zumpano, Influence of Temperature, Strain Rate, and Condition on the Mechanical Response of an AlSi-PES Abradable, Exp Mech 65 (2025) 1259–1278. https://doi.org/10.1007/s11340-025-01211-z.
[61] R. Rajendran, Gas turbine coatings – An overview, Engineering Failure Analysis 26 (2012) 355–369. https://doi.org/10.1016/j.engfailanal.2012.07.007.
[62] J.D. Cawley, Overview of zirconia with respect to gas turbine applications, (1984). https://ntrs.nasa.gov/citations/19840013672 (accessed July 1, 2025).
[63] C. Li, Y. Chai, Q. Wang, S. Wei, F. Du, W. Yan, G. Yan, W. Liu, L. Yang, Y. Zhou, Effect of calcium carbonate on the thermal shock behavior of YSZ-based abradable sealing coatings, Ceramics International 51 (2025) 8408–8419. https://doi.org/10.1016/j.ceramint.2024.12.271.
[64] B.E. Arendarchuck, K. Bertuol, F. Rivadeneira, B.C.N.M. de Castilho, B. Barnett, C. Moreau, P. Stoyanov, Tribological evaluation of Cu-based abradable coating, Wear (2025) 206034. https://doi.org/10.1016/j.wear.2025.206034.
[65] A. Shamloo, B. Fathi, S. Elkoun, D. Rodrigue, A. Soldera, Impact of compression molding conditions on the thermal and mechanical properties of polyethylene, J of Applied Polymer Sci 135 (2018) 46176. https://doi.org/10.1002/app.46176.
[66] R.S. Lima, B.R. Marple, A. Dadouche, W. Dmochowski, B. Liko, Nanostructured Abradable Coatings for High Temperature Applications, in: B.R. Marple, M.M. Hyland, Y.-C. Lau, R.S. Lima, J. Voyer (Eds.), Seattle, Washington, USA, 2006: pp. 775–780. https://doi.org/10.31399/asm.cp.itsc2006p0775.
[67] R.E. Johnston, W.J. Evans, Freestanding abradable coating manufacture and tensile test development, Surface and Coatings Technology 202 (2007) 725–729. https://doi.org/10.1016/j.surfcoat.2007.05.082.
[68] K. Bobzin, E. Lugscheider, J. Zwick, F. Ernst, D. Sporer, N. Hopkins, M. Hertter, J. Matejicek, Microstructure and Properties of New Abradable Seal Coatings for Compressor Applications, in: B.R. Marple, M.M. Hyland, Y.-C. Lau, R.S. Lima, J. Voyer (Eds.), Seattle, Washington, USA, 2006: pp. 1083–1088. https://doi.org/10.31399/asm.cp.itsc2006p1083.
[69] J. Chauvette, I.L. Hia, J. Pierre, G. Chenier, R.D. Farahani, N. Piccirelli, D. Therriault, Non‐Planar Multiprocess Additive Manufacturing of Multifunctional Composites, Adv Materials Technologies 8 (2023) 2300399. https://doi.org/10.1002/admt.202300399.
[70] X. Guo, C. Li, L. Li, Z. Yuan, X. Wang, W. Zhang, J. Liu, G. Chen, X. Cui, Y. Xu, Yttrium-Stabilized Zirconia Ceramics Fabrication through Material Extrusion 3D Printing, J. of Materi Eng and Perform 34 (2025) 7584–7591. https://doi.org/10.1007/s11665-024-09691-1.
[71] C. Zou, Y. Ou, W. Zhou, Z. Li, P. Zheng, X. Guo, Microstructure and Properties of Hot Pressing Sintered SiC/Y3Al5O12 Composite Ceramics for Dry Gas Seals, Materials 17 (2024) 1182. https://doi.org/10.3390/ma17051182.
[72] N.P. Padture, Advanced structural ceramics in aerospace propulsion, Nature Mater 15 (2016) 804–809. https://doi.org/10.1038/nmat4687.
[73] K. Bertuol, M.T. Ribas, A.R. Mayer, A.G.M. Pukasiewicz, I.B. a. F. Siqueira, A. Chicoski, M.J. de Souza, Study of HVOF Parameter Influence on Microstructure and Wear Resistance of Cr3C2-25NiCr Coatings, in: ASM International, 2019: pp. 320–325. https://doi.org/10.31399/asm.cp.itsc2019p0320.
[74] A.S. Takimi, Obtenção de superligas NiCrAIY nanoestruturadas por moagem de alta energia e sua aplicação por aspersão térmica hipersônica (HVOF), (2004) 91.
[75] T.S. Sidhu, S. Prakash, R.D. Agrawal, Studies on the properties of high-velocity oxy-fuel thermal spray coatings for higher temperature applications, Mater Sci 41 (2005) 805–823. https://doi.org/10.1007/s11003-006-0047-z.
[76] S. Brossard, Microstructural Analysis of Thermal Spray Coatings by Electron Microscopy, (2010) 376.
[77] A. Meghwal, A. Anupam, B.S. Murty, C.C. Berndt, R.S. Kottada, A.S.M. Ang, Thermal Spray High-Entropy Alloy Coatings: A Review, J Therm Spray Tech 29 (2020) 857–893. https://doi.org/10.1007/s11666-020-01047-0.
[78] K. Bertuol, Análise da influência de parâmetros de shot peening na dureza superficial, rugosidade e tensão residual em aço ASTM A743-CA6NM - Analysis of the influence of Shot Peening parameters on surface hardness, roughness and residual stress in steel ASTM A743-CA6NM, Bachelor’s Thesis in Mechanical Engineering, Biblioteca Digital Brasileira de Teses e Dissertações, Federal University of Technology - Parana, Ponta Grossa, 2014. http://repositorio.utfpr.edu.br/jspui/handle/1/16371.
[79] A.R. Mayer, K. Bertuol, I.B.A.F. Siqueira, A. Chicoski, R.F. Váz, M.J. de Sousa, A.G.M. Pukasiewicz, Evaluation of cavitation/corrosion synergy of the Cr3C2-25NiCr coating deposited by HVOF process, Ultrasonics Sonochemistry 69 (2020) 105271. https://doi.org/10.1016/j.ultsonch.2020.105271.
[80] K. Bertuol, Estudo do efeito sinérgico cavitação/erosão em revestimentos de carboneto de cromo e tungstênio depositados por aspersão térmica de alta velocidade - Study of synergistic cavitation/erosion effect on chromium and tungsten carbide coatings deposited by high velocity oxy-fuel, Master Thesis, Universidade Tecnológica Federal do Paraná, 2020. http://repositorio.utfpr.edu.br/jspui/handle/1/4856 (accessed October 5, 2024).
[81] T.C. Hanson, C.M. Hackett, G.S. Settles, Independent control of HVOF particle velocity and temperature, Journal of Thermal Spray Technology (n.d.).
[82] S.S. Kumar, C.D. Prasad, H. Hanumanthappa, Role of Thermal Spray Coatings on Erosion, Corrosion, and Oxidation in Various Applications: A Review, J Bio Tribo Corros 10 (2024) 22. https://doi.org/10.1007/s40735-024-00822-8.
[83] T.S. Sidhu, S. Prakash, R.D. Agrawal, Studies on the properties of high-velocity oxy-fuel thermal spray coatings for higher temperature applications, Mater Sci 41 (2005) 805–823. https://doi.org/10.1007/s11003-006-0047-z.
[84] A.S.M. Ang, C.C. Berndt, A review of testing methods for thermal spray coatings, International Materials Reviews 59 (2014) 179–223. https://doi.org/10.1179/1743280414Y.0000000029.
[85] C.P. Bergmann, J. Vicenzi, Protection against Erosive Wear Using Thermal Sprayed Cermet: A Review, in: Protection against Erosive Wear Using Thermal Sprayed Cermet, Springer Berlin Heidelberg, Berlin, Heidelberg, 2011: pp. 1–77. https://doi.org/10.1007/978-3-642-21987-0_1.
[86] E. Lugscheider, C. Barimani, P. Eckert, U. Eritt, Modeling of the APS plasma spray process, Computational Materials Science 7 (1996) 109–114. https://doi.org/10.1016/S0927-0256(96)00068-7.
[87] J. Stringer, M.B. Marshall, High speed wear testing of an abradable coating, Wear 294–295 (2012) 257–263. https://doi.org/10.1016/j.wear.2012.07.009.
[88] W. Xue, S. Gao, D. Duan, J. Zhang, Y. Liu, S. Li, Effects of blade material characteristics on the high-speed rubbing behavior between Al-hBN abradable seal coatings and blades, Wear 410–411 (2018) 25–33. https://doi.org/10.1016/j.wear.2018.06.003.
[89] Oerlikon Metco, Material Product Data Sheet - CoNiCrAlY-BN / Polyester Abradable Thermal Spray Powders, in: 2020.
[90] D. Jech, L. Čelko, P. Komarov, J. Ziegelheim, Z. Česánek, J. Schubert, The Role of Different Atmospheric Plasma Spray Parameters on Microstructure of Abradable AlSi-Polyester Coatings, SSP 270 (2017) 224–229. https://doi.org/10.4028/www.scientific.net/SSP.270.224.
[91] A.K. Azmeera, P. Jadhav, C. Lande, Effect of Change in Material Properties of the Abradable Coating on the Wear Behavior of It—Microstructure Model-Based Analysis Approach, Lubricants 13 (2025) 22. https://doi.org/10.3390/lubricants13010022.
[92] F. Xu, Y. Tan, H. Sun, B. Wang, X. Zhou, J. Sun, Corrosion behavior and mechanism of NiCrAl–NiC abradable sealing coating system in NaCl solution, Materials Chemistry and Physics 316 (2024) 129059. https://doi.org/10.1016/j.matchemphys.2024.129059.
[93] Y. Maozhong, H. Baiyun, H. Jiawen, Erosion wear behaviour and model of abradable seal coating, Wear 252 (2002) 9–15. https://doi.org/10.1016/S0043-1648(01)00681-0.
[94] J. Alqallaf, N. Ali, J.A. Teixeira, A. Addali, Solid Particle Erosion Behaviour and Protective Coatings for Gas Turbine Compressor Blades—A Review, Processes 8 (2020) 984. https://doi.org/10.3390/pr8080984.
[95] B. Malvi, M. Roy, Elevated temperature erosion of abradable seal coating: Original scientific paper, J. Electrochem. Sci. Eng. 12 (2022) 889–899. https://doi.org/10.5599/jese.1388.
[96] R.E. Johnston, Mechanical characterisation of AlSi-hBN, NiCrAl-Bentonite, and NiCrAl-Bentonite-hBN freestanding abradable coatings, Surface and Coatings Technology 205 (2011) 3268–3273. https://doi.org/10.1016/j.surfcoat.2010.11.044.
[97] R.E. Chupp, R.C. Hendricks, S.B. Lattime, B.M. Steinetz, Sealing in Turbomachinery, Journal of Propulsion and Power 22 (2006) 313–349. https://doi.org/10.2514/1.17778.
[98] D. Mittal, D. Singh, S. Kumar Sharma, Thermal Characteristics and Tribological Performances of Solid Lubricants: A Mini Review, in: A. Dutta, H. Muhamad Ali (Eds.), Advances in Rheology of Materials, IntechOpen, 2023. https://doi.org/10.5772/intechopen.109982.
[99] M. John, P.L. Menezes, Self-Lubricating Materials for Extreme Condition Applications, Materials 14 (2021) 5588. https://doi.org/10.3390/ma14195588.
[100] X. Sun, J. Zhang, W. Pan, W. Wang, C. Tang, A review on the preparation and application of BN composite coatings, Ceramics International 49 (2023) 24–39. https://doi.org/10.1016/j.ceramint.2022.10.259.
[101] J. Tang, F. Yu, H. Zhang, D. Chen, Effect of Microstructure Refining on the Thermal Stability and Wear Resistance of Abradable AlSi-Polyester Coating, J Therm Spray Tech 30 (2021) 1615–1623. https://doi.org/10.1007/s11666-021-01217-8.
[102] X. Ma, A. Matthews, Investigation of abradable seal coating performance using scratch testing, Surface and Coatings Technology 202 (2007) 1214–1220. https://doi.org/10.1016/j.surfcoat.2007.07.076.
[103] M. Watson, M. Marshall, Wear mechanisms at the blade tip seal interface, Wear 404–405 (2018) 176–193. https://doi.org/10.1016/j.wear.2018.03.009.
[104] S. Skiba, L. Faure, S. Philippon, J. Papasidero, Experimental Investigation of the Mechanical Behavior of an AlSi-PE Abradable Coating at High Strain Rates for a Large Range of Temperatures, J. Dynamic Behavior Mater. 6 (2020) 213–223. https://doi.org/10.1007/s40870-020-00242-y.
[105] B. Martinet, A. Cappella, S. Philippon, C. Montebello, Effect of temperature on wear mechanisms of an aluminium - based abradable coating for aircraft engines after a dynamic interaction with a Ti6Al4V blade, Wear 446–447 (2020) 203202. https://doi.org/10.1016/j.wear.2020.203202.
[106] T. Liu, J. Liu, D. Zhang, Y. Hou, The Influence of Incursion Rate on Abradability of AlSi-hBN Abradable Seal Coating, in: Proceedings from the International Thermal Spray Conference, ITSC 2024, Milan, Italy, 2024: pp. 159–165. https://doi.org/10.31399/asm.cp.itsc2024p0159.
[107] S. Yang, S. Gao, W. Xue, B. Wu, D. Duan, Structural design and high temperature tribological behavior of a new turbine blade tip protective coating, Surface and Coatings Technology 457 (2023) 129316. https://doi.org/10.1016/j.surfcoat.2023.129316.
[108] R. Schmid, A.R. Nicoll, Advances in Abradable Coatings for Gas Turbines, in: Volume 5: Manufacturing Materials and Metallurgy; Ceramics; Structures and Dynamics; Controls, Diagnostics and Instrumentation; Education; General, American Society of Mechanical Engineers, The Hague, Netherlands, 1994: p. V005T12A010. https://doi.org/10.1115/94-GT-449.
[109] K. Bertuol, B. Arendarchuck, F. Rivadeneira, L. Nolte, M. Lehner, B. Barnett, C. Moreau, P. Stoyanov, Assessment of AlSi-based abradable coatings with hBN and MoCr additives for aerospace conditions: A novel high-temperature rig approach, Aerospace Science and Technology 168 (2026) 110737. https://doi.org/10.1016/j.ast.2025.110737.
[110] K. Bobzin, W. Wietheger, H. Heinemann, S.R. Dokhanchi, M. Rom, G. Visconti, Prediction of Particle Properties in Plasma Spraying Based on Machine Learning, J Therm Spray Tech 30 (2021) 1751–1764. https://doi.org/10.1007/s11666-021-01239-2.
[111] M.A. Zavareh, E. Doustmohammadi, A.A.D.M. Sarhan, R. Karimzadeh, P. Moozarm Nia, R.S. Al/Kulpid Singh, Comparative study on the corrosion and wear behavior of plasma-sprayed vs. high velocity oxygen fuel-sprayed Al8Si20BN ceramic coatings, Ceramics International 44 (2018) 12180–12193. https://doi.org/10.1016/j.ceramint.2018.03.275.
[112] H.I. Faraoun, T. Grosdidier, J.-L. Seichepine, D. Goran, H. Aourag, C. Coddet, J. Zwick, N. Hopkins, Improvement of thermally sprayed abradable coating by microstructure control, Surface and Coatings Technology 201 (2006) 2303–2312. https://doi.org/10.1016/j.surfcoat.2006.03.047.
[113] Y.D. Liu, J.P. Zhang, Z.L. Pei, J.H. Liu, W.H. Li, J. Gong, C. Sun, Investigation on high-speed rubbing behavior between abrasive coatings and Al/hBN abradable seal coatings, Wear 456–457 (2020) 203389. https://doi.org/10.1016/j.wear.2020.203389.
[114] G. Rajaram, S. Kumaran, T.S. Rao, Sliding Wear Behavior of Al-Si/Graphite Composite, Tribology Transactions 54 (2010) 115–121. https://doi.org/10.1080/10402004.2010.528854.
[115] X. Ma, A. Matthews, Evaluation of abradable seal coating mechanical properties, Wear 267 (2009) 1501–1510. https://doi.org/10.1016/j.wear.2009.03.044.
[116] J.M. Guilemany, J. Navarro, C. Lorenzana, S. Vizcaino, J.M. Miguel, Tribological Behaviour of Abradable Coatings Obtained by Atmospheric Plasma Spraying (APS), in: C.C. Berndt, K.A. Khor, E.F. Lugscheider (Eds.), Singapore, 2001: pp. 1115–1118. https://doi.org/10.31399/asm.cp.itsc2001p1115.
[117] N. Zhang, J. Shen, H. Xuan, Y. Hu, W. Hong, Evaluation of an AlSi-polyester abradable seal coating performance using high-temperature and high-velocity abrasion tests, Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 230 (2016) 842–851. https://doi.org/10.1177/1350650115619150.
[118] Z. Mutasim, L. Hsu, E. Wong, Evaluation of plasma sprayed abradable coatings, (1992).
[119] M. Cuny, S. Philippon, P. Chevrier, F. Garcin, Experimental Measurement of Dynamic Forces Generated during Short-Duration Contacts: Application to Blade-Casing Interactions in Aircraft Engines, Exp Mech 54 (2014) 101–114. https://doi.org/10.1007/s11340-013-9780-z.
[120] K. Boddenberg, B. Kock, M. Dorfman, L. Russo, M. Nestler, A New Aluminium Silicon-Boron Nitride Abradable for Compressor Components, in: C. Coddet (Ed.), Nice, France, 1998: pp. 1049–1054. https://doi.org/10.31399/asm.cp.itsc1998p1049.
[121] Justyna Jońcaa, Benoît Malarda, Jeremy Souliéa, Tom Sanviemvongsaka, Serge Selezneffb, Oxidation behaviour of a CoNiCrAlY/h-BN based abradable coating, Corrosion Science (2019).
[122] D. Chappel, H. Howe, L. Vo, Abradable seal testing - Blade temperatures during low speed rub event, in: 37th Joint Propulsion Conference and Exhibit, American Institute of Aeronautics and Astronautics, Salt Lake City,UT,U.S.A., 2001. https://doi.org/10.2514/6.2001-3479.
[123] W. Tan, D. Zois, S. Wilson, M.R. Dorfman, Investigation of High Temperature Compressor Abradable Coatings for Gas Turbine Applications, in: F. Azarmi, K. Balani, H. Li, T. Eden, K. Shinoda, T. Hussain, F.-L. Toma, Y.-C. Lau, J. Veilleux (Eds.), Orlando, Florida, USA, 2018: pp. 355–360. https://doi.org/10.31399/asm.cp.itsc2018p0355.
[124] C. Ju, Q. Li, Z.L. Wang, Q.H. Song, J.J. Li, Z.P. Sun, Y.F. Zhang, Reaction mechanism comparison of AlSi-polyester and aluminum bronze/polyester plasma spraying, DJNB 16 (2021) 1411–1425. https://doi.org/10.15251/DJNB.2021.164.1411.
[125] S.-Y. Yang, D. Guo, X.-W. Cheng, J.-M. Liu, Y.-G. Yu, Corrosion behaviour of NiCrFeAl-hBN seal coatings in oxidation environments at a high temperature, Rare Met. 40 (2021) 212–218. https://doi.org/10.1007/s12598-020-01480-8.
[126] Y. Nava, Z. Mutasim, M. Coe, Abradable Coatings for Low-Temperature Applications, in: C.C. Berndt, K.A. Khor, E.F. Lugscheider (Eds.), Singapore, 2001: pp. 263–268. https://doi.org/10.31399/asm.cp.itsc2001p0263.
[127] A. Cappella, S. Philippon, L. Pinheiro, Micro-Ct and Ai-Based Analysis of Induced Changes in Porosity of Alsi-Pe Abradable Coatings Due to Short-Term Loading and High Temperature, (2024). https://doi.org/10.2139/ssrn.4980962.
[128] J. Xiao, Y. Chen, D. Chen, J. Tian, H. Ouyang, A. Wang, Interactions between blades and abradable coatings: A numerical approach considering geometrical nonlinearity, International Journal of Mechanical Sciences 191 (2021) 106052. https://doi.org/10.1016/j.ijmecsci.2020.106052.
[129] F. Al-Bender, Fundamentals of Friction Modeling, ASPE- The American Society of precision Engineering; 301 Glenwood Avenue, Suite 205, Raleigh, NC 27603, P.O. Box 10826, Raleigh, NC 27605, 2010.
[130] J. Cheng, X. Hu, D. Lancaster, X. Sun, W. Joost, Modeling deformation and failure in AlSi-polyester abradable sealcoating material using microstructure-based finite element simulation, Materials & Design 219 (2022) 110791. https://doi.org/10.1016/j.matdes.2022.110791.
[131] R. Lye, A. Pellegrino, C. Bennett, J. Rouse, P. Agyakwa, G. Zumpano, Influence of Temperature, Strain Rate, and Condition on the Mechanical Response of an AlSi-PES Abradable, Exp Mech (2025). https://doi.org/10.1007/s11340-025-01211-z.
[132] B. Zhang, M. Marshall, R. Lewis, Investigating Al-Si base abradable material removal mechanism with axial movement in labyrinth seal system, Wear 510–511 (2022) 204496. https://doi.org/10.1016/j.wear.2022.204496.
[133] R.E. Chupp, Y.-C. Lau, F. Ghasripoor, D.J. Baldwin, C. Ng, T. McGovern, D. Berkeley, Development of Higher Temperature Abradable Seals for Gas Turbine Applications, in: Volume 4: Turbo Expo 2004, ASMEDC, Vienna, Austria, 2004: pp. 221–229. https://doi.org/10.1115/GT2004-53029.
[134] K. Bertuol, B.E. Arendarchuck, F.R.E. Rivadeneira, B.C.N.M. de Castilho, C. Moreau, P. Stoyanov, Design and Development of Cost-Effective Equipment for Tribological Evaluation of Thermally Sprayed Abradable Coatings, J Therm Spray Tech (2024). https://doi.org/10.1007/s11666-024-01830-3.
[135] J. Zhang, X. Lu, J. Lin, L. Ma, H. Dai, Dynamic characteristics analysis of blade-casing rubbing faults with abradable coatings, Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 235 (2021) 975–987. https://doi.org/10.1177/0954406220941553.
[136] G. Sutter, S. Philippon, F. Garcin, Dynamic analysis of the interaction between an abradable material and a titanium alloy, Wear 261 (2006) 686–692. https://doi.org/10.1016/j.wear.2006.01.030.
[137] M. Yi, J. He, B. Huang, H. Zhou, Friction and wear behaviour and abradability of abradable seal coating, Wear 231 (1999) 47–53. https://doi.org/10.1016/S0043-1648(99)00093-9.
[138] C. Delebarre, V. Wagner, J.Y. Paris, G. Dessein, J. Denape, J. Gurt-Santanach, An experimental study of the high speed interaction between a labyrinth seal and an abradable coating in a turbo-engine application, Wear 316 (2014) 109–118. https://doi.org/10.1016/j.wear.2014.04.023.
[139] P. Stoyanov, K.M. Harrington, A. Frye, Insights into the Tribological Characteristic of Cu-Based Coatings Under Extreme Contact Conditions, JOM 72 (2020) 2191–2197. https://doi.org/10.1007/s11837-020-04087-7.
[140] S. Wilson, Abradable Thermal Spray Applications and Technology, in: R.C. Tucker (Ed.), Thermal Spray Technology, ASM International, 2013: pp. 287–295. https://doi.org/10.31399/asm.hb.v05a.a0005738.
[141] K. Bertuol, F. Rivadeneira, R. Nair, C. Moreau, P. Stoyanov, Advancing Abradable Evaluation: A Comprehensive Review and Development of an Innovative Cost-effective Methodology, in: Presented at the 27th International Congress of Mechanical Engineering, COBEM 2023, Florianopolis, Santa Catarina, Brazil, 2023.
[142] P. Stoyanov, A. Boyne, A. Ignatov, Tribological characteristics of Co-based plasma sprayed coating in extreme conditions, Results in Surfaces and Interfaces 3 (2021) 100007. https://doi.org/10.1016/j.rsurfi.2021.100007.
[143] H.I.H. Saravanamuttoo, ed., Gas turbine theory, 6th ed, Pearson Prentice Hall, Harlow, England ; New York, 2009.
[144] S.C. Kacker, U. Okapuu, A Mean Line Prediction Method for Axial Flow Turbine Efficiency, Journal of Engineering for Power 104 (1982) 111–119. https://doi.org/10.1115/1.3227240.
[145] H. Moustapha, M.F. Zelesky, eds., Axial and radial turbines, Concepts NREC, White River Junction, Vt, 2003.
[146] B. Zhang, M. Marshall, Investigating material removal mechanism of Al-Si base abradable coating in labyrinth seal system, Wear 426–427 (2019) 239–249. https://doi.org/10.1016/j.wear.2019.01.034.
[147] N. Fois, M. Watson, J. Stringer, M. Marshall, An investigation of the relationship between wear and contact force for abradable materials, Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 229 (2015) 136–150. https://doi.org/10.1177/1350650114545139.
[148] Kistler Group, Kistler LabAmp – Charge Amplifier and Data Acquisition for Multi-Channel Measurement, (2017). https://kistler-embedded.partcommunity.com/3d-cad-models/FileService/File/kistler/07_electronics/01_charge_amplifiers/01_laboratory/5167a_english.pdf (accessed June 17, 2024).
[149] Kistler Group, Triaxial load cells, piezoelectric force transducers, (2024). https://www.kistler.com/CA/en/cp/triaxial-load-cells-93x7-8c/P0000703 (accessed June 17, 2024).
[150] FLIR Systems, FLIR A320 Tempscreen (9 Hz), (2018). https://www.itm.com/pdfs/cache/www.itm.com/48201-1201/datasheet/48201-1201-datasheet.pdf (accessed June 17, 2024).
[151] ST-PMC1 Programmable single axis motion controller, Variometrum Webshop (2024). https://variometrum.hu/en/programmable-single-axis-motion-controller (accessed June 17, 2024).
[152] A.M. Kharaev, R.Ch. Bazheva, A.A. Chaika, Composite Materials Based on Polycarbonate (Review), International Polymer Science and Technology 34 (2007) 27–33. https://doi.org/10.1177/0307174X0703401006.
[153] S. Sadeghi Esfahlani, Ballistic performance of Polycarbonate and Polymethyl methacrylate under normal and inclined dynamic impacts, Heliyon 7 (2021) e06856. https://doi.org/10.1016/j.heliyon.2021.e06856.
[154] S.M. Walley, J.E. Field, P.W. Blair, A.J. Milford, The effect of temperature on the impact behaviour of glass/polycarbonate laminates, International Journal of Impact Engineering 30 (2004) 31–53. https://doi.org/10.1016/S0734-743X(03)00046-0.
[155] J. Radin, W. Goldsmith, Normal projectile penetration and perforation of layered targets, International Journal of Impact Engineering 7 (1988) 229–259. https://doi.org/10.1016/0734-743X(88)90028-0.
[156] Photron, FASTCAM SA1.1 Hardware Manual, (2024). https://www.highspeedimaging.com/media/photron_manuals/FASTCAM_SA1_1&SA1_1RV_HW_Manual.pdf.
[157] Kistler Group, Triaxial Accelerometer Family Type 8763B, (2024). https://www.kistler.com/CA/en/cp/iepe-triaxial-accelerometers-8763b/P0000559 (accessed July 10, 2024).
[158] K. Bertuol, F. Rivadeneira, R. Nair, B. Barnett, C. Moreau, P. Stoyanov, Influence of hBN on the Abradable Performance of AlSi-Based Coatings: Bridging the Gap Between Tribological Assessment and Abradability Testing, in: Surface & Coatings Technology, 2024.
[159] C. Bidmeshki, A.C. Liberati, A. Roy, A.I. Encalada, F.B. Ettouil, S.A. Alidokht, R.R. Chromik, C. Moreau, P. Stoyanov, Microstructural, Mechanical, and Tribological Evaluation of Cu-Al-based Coatings Deposited by APS and HVOF, J Therm Spray Tech 32 (2023) 2321–2335. https://doi.org/10.1007/s11666-023-01665-4.
[160] B. Arendarchuck, K. Bertuol, F. Rivadeneira, B. Castilho, B. Barnett, C. Moreau, P. Stoyanov, Unveiling the Influence of Nickel on Erosion and Tribological Performance of AlSi-based Abradable Coatings, in: Submitted to Journal of Materials Science, 2024.
[161] M. Watson, N. Fois, M.B. Marshall, Effects of blade surface treatments in tip–shroud abradable contacts, Wear 338–339 (2015) 268–281. https://doi.org/10.1016/j.wear.2015.06.018.
[162] A. Wu, Z. Song, K. Nakata, J. Liao, L. Zhou, Interface and properties of the friction stir welded joints of titanium alloy Ti6Al4V with aluminum alloy 6061, Materials & Design 71 (2015) 85–92. https://doi.org/10.1016/j.matdes.2014.12.015.
[163] N. Fois, J. Stringer, M.B. Marshall, Adhesive transfer in aero-engine abradable linings contact, Wear 304 (2013) 202–210. https://doi.org/10.1016/j.wear.2013.04.033.
[164] M. Bounazef, S. Guessasma, E.A. Adda Bedia, Blade protection and efficiency preservation of a turbine by a sacrificial material coating, Advanced Powder Technology 18 (2007) 123–133. https://doi.org/10.1163/156855207780208583.
[165] D. Qin, Y. Niu, H. Li, X. Zhong, X. Zheng, J. Sun, Fabrication and characterization of Yb2Si2O7-based composites as novel abradable sealing coatings, Ceramics International 47 (2021) 23153–23161. https://doi.org/10.1016/j.ceramint.2021.05.029.
[166] Z. Wang, L. Du, H. Lan, C. Huang, W. Zhang, Preparation and characterization of YSZ abradable sealing coating through mixed solution precursor plasma spraying, Ceramics International 45 (2019) 11802–11811. https://doi.org/10.1016/j.ceramint.2019.03.058.
[167] D. Sporer, M. Dorfman, L. Xie, A. Refke, I. Giovannetti, M. Giannozzi, Processing and Properties of Advanced Ceramic Abradable Coatings, in: B.R. Marple, M.M. Hyland, Y.-C. Lau, C.-J. Li, R.S. Lima, G. Montavon (Eds.), Beijing, China, 2007: pp. 495–500. https://doi.org/10.31399/asm.cp.itsc2007p0495.
[168] R.C. Bill, L.T. Shiembob, Friction and Wear of Sintered Fibermetal Abradable Seal Materials, Journal of Lubrication Technology 99 (1977) 421–427. https://doi.org/10.1115/1.3453236.
[169] M.R. Dorfman, Thermal Spray Coatings, in: Handbook of Environmental Degradation of Materials, Elsevier, 2018: pp. 469–488. https://doi.org/10.1016/B978-0-323-52472-8.00023-X.
[170] H.I. Faraoun, J.L. Seichepine, C. Coddet, H. Aourag, J. Zwick, N. Hopkins, D. Sporer, M. Hertter, Modelling route for abradable coatings, Surface and Coatings Technology 200 (2006) 6578–6582. https://doi.org/10.1016/j.surfcoat.2005.11.105.
[171] K. Bertuol, F. Rivadeneira, B. Castilho, C. Moreau, P. Stoyanov, Design and Development of Cost-Effective Equipment for Tribological Evaluation of Thermally Sprayed Abradable Coatings, (2024).
[172] P. Morrell, D.F. Bettridge, M.D. Greaves, M.R. Dorfman, L.D. Russo, C. Britton, K. Harrison, A New Aluminum-Silicon/Boron Nitride Powder for Clearance Control Applications, in: C. Coddet (Ed.), Nice, France, 1998: pp. 1187–1192. https://doi.org/10.31399/asm.cp.itsc1998p1187.
[173] Y. Alemdağ, M. Beder, Microstructural, mechanical and tribological properties of Al–7Si–(0–5)Zn alloys, Materials & Design 63 (2014) 159–167. https://doi.org/10.1016/j.matdes.2014.06.006.
[174] M. Walczak, M. Zwierzchowski, J. Bieniaś, J. Caban, The Tribological Characteristics of Al-Si/Graphite Composite, Tribologia 271 (2018) 97–104. https://doi.org/10.5604/01.3001.0010.6369.
[175] B. Berthoul, A. Batailly, L. Stainier, M. Legrand, P. Cartraud, Phenomenological modeling of abradable wear in turbomachines, Mechanical Systems and Signal Processing 98 (2018) 770–785. https://doi.org/10.1016/j.ymssp.2017.05.020.
[176] W.H. Xue, S.Y. Gao, D.L. Duan, Y. Liu, S. Li, Material transfer behaviour between a Ti6Al4V blade and an aluminium hexagonal boron nitride abradable coating during high-speed rubbing, Wear 322–323 (2015) 76–90. https://doi.org/10.1016/j.wear.2014.10.001.
[177] H. Ma, X. Tai, Q. Han, Z. Wu, D. Wang, B. Wen, A revised model for rubbing between rotating blade and elastic casing, Journal of Sound and Vibration 337 (2015) 301–320. https://doi.org/10.1016/j.jsv.2014.10.020.
[178] D.F.P. Bowden, D. Tabor, Mechanism of Metallic Friction, Nature 150 (1942) 197–199.
[179] H. Hertz, Über die Berührung fester elastischer Körper, Journal Für Die Reine Und Angewandte Mathematik 92 (1881) 156–171.
[180] R.G. Budynas, J.K. Nisbett, Shigley’s mechanical engineering design, 9th ed, McGraw-Hill, New York, 2011.
[181] C. Hu, Z.H. Wen, J.M. Luo, S.Y. Cui, Y.C. Ma, J.Y. Guo, Microstructure and tribological behavior of AlSi abradable seal coatings prepared by atmospheric plasma spraying, (2022).
[182] M. Dorfman, U. Erning, J. Mallon, Gas turbines use ‘abradable’ coatings for clearance-control seals, Sealing Technology 2002 (2002) 7–8. https://doi.org/10.1016/S1350-4789(02)80002-2.
[183] D. Sporer, S. Wilson, Current and Next-Generation Titanium Blade Compatible Compressor Abradable Coatings, in: Proceedings from the International Thermal Spray Conference and Exposition, ITSC 2012, Houston, Texas, USA, 2012: pp. 143–148. https://doi.org/10.31399/asm.cp.itsc2012p0143.
[184] J. Wang, Physical Metallurgy of Aluminum Alloys, ASM International (2018) 44–79. https://doi.org/10.31399/asm.hb.v02a.a0006503.
[185] Oerlikon Metco, Corrosion-Resistant Compressor Abradable Reduces Maintenance and Operating Costs, in: SF-0028.0 – Solutions Flash, 2019. https://www.oerlikon.com/ecoma/files/SF-0028.0_Corrosion-Resistant_LPC_Abradable.pdf?download=true.
[186] Z.L. Wang, Q. Li, X.R. Han, C. Ju, Q.H. Song, J.J. Li, Z.P. Sun, Y.F. Zhang, Reaction mechanism of Ni-Al during thermal spraying. | Digest Journal of Nanomaterials & Biostructures (DJNB) | EBSCOhost, 16 (2021) 1295. https://doi.org/10.15251/djnb.2021.164.1295.
[187] B.E. Arendarchuck, K. Bertuol, F. Rivadeneira, B.C.N.M. De Castilho, B. Barnett, C. Moreau, P. Stoyanov, Unveiling the influence of nickel on the erosion and the tribological performance of AlSi-based abradable coatings, J Mater Sci 59 (2024) 22266–22282. https://doi.org/10.1007/s10853-024-10492-z.
[188] İ. Öztürk, G. Hapçı Ağaoğlu, E. Erzi, D. Dispinar, G. Orhan, Effects of strontium addition on the microstructure and corrosion behavior of A356 aluminum alloy, Journal of Alloys and Compounds 763 (2018) 384–391. https://doi.org/10.1016/j.jallcom.2018.05.341.
[189] E. Akiyama, A. Kawashima, K. Asami, K. Hashimoto, The effects of alloying elements on the passivity of sputter-deposited amorphous Al-Cr-Mo alloys in 1M HCl, Corrosion Science 38 (1996) 1281–1294. https://doi.org/10.1016/0010-938X(96)00017-0.
[190] W. Yang, R.-C. Ni, H.-Z. Hua, A. Pourbaix, The behavior of chromium and molybdenum in the propagation process of localized corrosion of steels, Corrosion Science 24 (1984) 691–707. https://doi.org/10.1016/0010-938X(84)90059-3.
[191] M.I. Hazza, M.E. El-Dahshan, The effect of molybdenum on the corrosion behaviour of some steel alloys, Desalination 95 (1994) 199–209. https://doi.org/10.1016/0011-9164(94)00014-X.
[192] N. Ebrahimi, M.C. Biesinger, D.W. Shoesmith, J.J. Noël, The influence of chromium and molybdenum on the repassivation of nickel-chromium-molybdenum alloys in saline solutions, Surface and Interface Analysis 49 (2017) 1359–1365. https://doi.org/10.1002/sia.6254.
[193] J.R. Hayes, J.J. Gray, A.W. Szmodis, C.A. Orme, Influence of Chromium and Molybdenum on the Corrosion of Nickel-Based Alloys, Corrosion 62 (2006) 491–500. https://doi.org/10.5006/1.3279907.
[194] K. Hashimoto, K. Asami, A. Kawashima, H. Habazaki, E. Akiyama, The role of corrosion-resistant alloying elements in passivity, Corrosion Science 49 (2007) 42–52. https://doi.org/10.1016/j.corsci.2006.05.003.
[195] V. Maurice, P. Marcus, Molybdenum effects on the stability of passive films unraveled at the nanometer and atomic scales, Npj Mater Degrad 8 (2024) 3. https://doi.org/10.1038/s41529-023-00418-6.
[196] M.B. Rockel, M. Renner, Pitting, Crevice and stress corrosion resistance of high chromium und molybdenum alloy stainless steels, Materials & Corrosion 35 (1984) 537–542. https://doi.org/10.1002/maco.19840351202.
[197] A. Sinha, A. Islam, Z. Farhat, Reciprocating Wear Behavior of Al Alloys: Effect of Porosity and Normal Load, 1 (2015).
[198] P.A. Dearnley, J. Gummersbach, H. Weiss, A.A. Ogwu, T.J. Davies, The sliding wear resistance and frictional characteristics of surface modified aluminium alloys under extreme pressure, Wear 225–229 (1999) 127–134. https://doi.org/10.1016/S0043-1648(98)00355-X.
[199] K. Elleuch, S. Mezlini, S. Fouvry, P. Kapsa, Friction damage of aluminium alloys, Industrial Lubrication and Tribology 55 (2003) 279–286. https://doi.org/10.1108/00368790310496428.
[200] A. Koutsomichalis, N.M. Vaxevanidis, A. Mourlas, P. Psyllaki, Tribological Behavior of Al-Si Polyester Abradable Coatings, in: Vienna, Austria, 2011.
[201] D. Wu, Z. Yuan, S. Liu, J. Zheng, X. Wei, C. Zhang, Recent Development of Corrosion Factors and Coating Applications in Biomass Firing Plants, Coatings 10 (2020) 1001. https://doi.org/10.3390/coatings10101001.
[202] Y. Kang, S. Cao, T. Gao, Z. You, Development and validation of a rotating blade-casing rubbing model by considering the blade deformation and abradable coating, Journal of Sound and Vibration 563 (2023) 117853. https://doi.org/10.1016/j.jsv.2023.117853.
[203] VAC AERO, Abradable Coatings used for Gas Path Seals in Turbine Engines, (2014). https://vacaero.com/information-resources/vac-aero-training/635-abradable-coatings-used-for-gas-path-seals-in-turbine-engines.html (accessed May 5, 2025).
[204] D.C. Wisler, B.F. Beacher, Improved compressor performance using recessed clearance (trenches), Journal of Propulsion and Power 5 (1989) 469–475. https://doi.org/10.2514/3.23178.
[205] B.E. Arendarchuck, K. Bertuol, F. Rivadeneira, B.C.N.M. de Castilho, B. Barnett, C. Moreau, P. Stoyanov, Tribological evaluation of Cu-based abradable coating, Wear 570 (2025) 206034. https://doi.org/10.1016/j.wear.2025.206034.
[206] W. Xue, S. Gao, D. Duan, L. Wang, Y. Liu, S. Li, Study on the High-Speed Rubbing Wear Behavior Between Ti6Al4V Blade and Nickel–Graphite Abradable Seal Coating, Journal of Tribology 139 (2017) 021604. https://doi.org/10.1115/1.4033454.
[207] Y. Kang, L. Chen, G.-J. Yang, C.-J. Li, Simultaneously improving strength and abradability for abradable seal coatings by localized bonding hollow spheres, Journal of Materials Science & Technology 192 (2024) 240–250. https://doi.org/10.1016/j.jmst.2023.12.067.
[208] R.A. Al-Samarai, Y. Al-Douri, Wear Mechanisms/Models, in: R.A. Al-Samarai, Y. Al-Douri (Eds.), Friction and Wear in Metals, Springer Nature, Singapore, 2024: pp. 33–60. https://doi.org/10.1007/978-981-97-1168-0_2.
[209] C. Li, Z. Tang, Y. Chai, S. Wei, F. Du, L. Yang, Y. Zhou, Critical parameters on sliding wear behavior in abradable sealing coatings, Wear 574–575 (2025) 206072. https://doi.org/10.1016/j.wear.2025.206072.
[210] B. Chevrier, J. Vincent, L. Faure, S. Philippon, Identification of constitutive laws’ parameters by means of experimental tests on AlSi-PE abradable coating, Materials & Design 218 (2022) 110673. https://doi.org/10.1016/j.matdes.2022.110673.
[211] McMaster-Carr, Ultra-Thin Aerogel Pipe Insulation Sheet, (2025). https://www.mcmaster.com/9590K32/ (accessed May 9, 2025).
[212] K. Wang, L. Yang, Investigation of fibre-modified silica aerogel composites, International Journal of Materials Research 115 (2024) 687–699. https://doi.org/10.1515/ijmr-2023-0201.
[213] C.M.R. Almeida, M.E. Ghica, A.L. Ramalho, L. Durães, Silica-based aerogel composites reinforced with different aramid fibres for thermal insulation in Space environments, J Mater Sci 56 (2021) 13604–13619. https://doi.org/10.1007/s10853-021-06142-3.
[214] S. Gao, W. Xue, D. Duan, S. Li, H. Zheng, Effect of thermal–physical properties on the abradability of seal coating under high-speed rubbing condition, Wear 394–395 (2018) 20–29. https://doi.org/10.1016/j.wear.2017.09.006.
[215] R. Ji, S. Wang, Y. Zou, G. Chen, Y. Wang, Z. Ye, J. Ouyang, D. Jia, Y. Zhou, Enhanced tribological performance of TiO2-hBN/CNT double-layer coating by CNT-assisted plasma electrolytic oxidation with nanoparticles addition, Tribology International 198 (2024) 109885. https://doi.org/10.1016/j.triboint.2024.109885.
[216] D. Guo, J. Liu, T. Liu, C. Wu, The Microstructure and Performance of Metal Based Abradable Sealing Coatings Based on Peeling Medium Particle Structure Design, J Therm Spray Tech (2025). https://doi.org/10.1007/s11666-025-01964-y.
[217] J. Eichler, C. Lesniak, Boron nitride (BN) and BN composites for high-temperature applications, Journal of the European Ceramic Society 28 (2008) 1105–1109. https://doi.org/10.1016/j.jeurceramsoc.2007.09.005.