Items where Division is "Building, Civil and Environmental Engineering" and Year is 2011

Article

Amador-Jiménez, Luis Esteban and Mrawira, Donath (2011) Capturing variability in pavement performance models from sufficient time-series predictors: a case study of the New Brunswick road network. Canadian Journal of Civil Engineering, 38 (2). pp. 210-220. ISSN 0315-1468

Amador-Jiménez, Luis Esteban and Mrawira, Donath (2011) Reliability-based initial pavement performance deterioration modelling. International Journal of Pavement Engineering, 12 (2). pp. 177-186. ISSN 1029-8436

Blocken, B., Stathopoulos, T., Carmeliet, J. and Hensen, J. L. M. (2011) Application of CFD in Building Performance Simulation for the Outdoor Environment: an Overview. Journal of Building Performance Simulation, 4 (2). pp. 157-184.

Chavez, M., Hajra, B., Stathopoulos, T. and Bahloul, A. (2011) Near-field Pollutant Dispersion in the Built Environment by CFD and Wind Tunnel Simulations. Journal of Wind Engineering and Industrial Aerodynamics, 99 (4). pp. 330-339.

Gousseau, P., Blocken, B., Stathopoulos, T. and van Heijst, G. J. F. (2011) CFD Simulation of Near-Field Pollutant Dispersion on a High-Resolution Grid: A Case Study by LES and RANS for a Building Group in Downtown Montreal. Atmospheric Environment, 45 (2). pp. 266-279.

Hajra, B., Stathopoulos, T. and Bahloul, A. (2011) The Effect of Upstream Buildings on Near-field Pollutant Dispersion in the Built Environment. Atmospheric Environment, 45 (28). pp. 4930-4940.

Han, S. S., Ramamurthy, A. S. and Biron, Pascale M. (2011) Characteristics of Flow around Open Channel 90° Bends with Vanes. Journal of Irrigation and Drainage Engineering, 137 (10). pp. 668-676. ISSN 0733-9437

Lateb, M., Masson, C., Stathopoulos, T. and Bedard, C. (2011) Effect of Stack Height and Exhaust Velocity on Pollutant Dispersion in the Wake of a Building. Atmospheric Environment, 45 (29). pp. 5150-5163.

Mostofi, Reza, Bahloul, Ali, Lara, Jaime, Wang, Bei, Cloutier, Yves and Haghighat, Fairborz (2011) Investigation of Potential Affecting Factors on Performance of N95 Respirator. Journal of the International Society for Respiratory Protection, 28 (1). pp. 26-39. ISSN 0892-6298

Tominaga, Y. and Stathopoulos, T. (2011) CFD Modeling of Pollution Dispersion in a Street Canyon: Comparison between LES and RANS. Journal of Wind Engineering and Industrial Aerodynamics, 99 (4). pp. 340-348.

Zhong, Lexuan and Haghighat, Fariborz (2011) Modeling and validation of a photocatalytic oxidation reactor for indoor environment applications. Chemical Engineering Science, 66 (23). pp. 5945-5954. ISSN 0009-2509

Zisis, I., Stathopoulos, T., Smith, I. and Doudak, G. (2011) Cladding Pressures and Primary Structural System Forces of a Wood Building Exposed to Strong Winds. Canadian Journal of Civil Engineering (CJCE), 38 . pp. 974-983. ISSN 1208-6029

Conference or Workshop Item

Amador-Jiménez, Luis Esteban (2011) Relating Land Use and Transport Modeling with Transportation Asset Management. In: T&DI Congress 2011: Integrated Transportation and Development for a Better Tomorrow, March 13-16, 2011, Chicago, Illinois.

Thesis

Abu-Osbeh, Muhanad (2011) Integrated Forensic Delay Analysis Framework for Construction Projects –Time and Cost Perspectives. PhD thesis, Concordia University.

Afroze, Niema (2011) Performance Evaluation of a New Multi-Environment Wastewater Treatment System for the Removal of Carbon, Nitrogen and Phosphorus from Synthetic and Real Agricultural Wastewaters. Masters thesis, Concordia University.

Alavi, Ali (2011) Remediation of a heavy metal and PAH-contaminated sediment by a rhamnolipid foam. Masters thesis, Concordia University.

Azimi, Hossein (2011) Development of VBI Models with Vehicle Acceleration for Bridge-Vehicle Dynamic Response. PhD thesis, Concordia University.

Candanedo Ibarra, José / A. (2011) A Study of Predictive Control Strategies for Optimally Designed Solar Homes. PhD thesis, Concordia University.

Chen, Liang (2011) Innovative Bracing System for Earthquake Resistant Concentrically Braced Frame Structures. Masters thesis, Concordia University.

Derghazarian, Sevag (2011) Immobilization Of Arsenic In Mine Tailings Using Standard And Nanoscale Metal Oxides. Masters thesis, Concordia University.

Doiron, Matthew Anthony (2011) Whole-Building Energy Analysis and Lessons Learned for a Near Net-Zero Energy Solar House. Masters thesis, Concordia University.

Elsalfiti, Abdul Karim (2011) Skin Friction of Micropiles Embedded in Gravelly Soils. Masters thesis, Concordia University.

Elwakil, Emad (2011) Knowledge Discovery Based Simulation System in Construction. PhD thesis, Concordia University.

Farnia, Nima (2011) Seismic Rehabilitation of Reinforced Masonry Columns Using CFRP and GFRP Wraps. PhD thesis, Concordia University.

Ganjidoost, Amin (2011) Toward Sustainability: An Optimization Framework for Life Cycle Assessment and Life Cycle Costing of Office Buildings. Masters thesis, Concordia University.

Garcia Rosero, Diego (2011) Finite element mesh optimization using the partial p-adaptive method for stress analysis of underground excavations. Masters thesis, Concordia University.

Golnaraghi, Sasan (2011) Development of Delays Claims Assessment Model. Masters thesis, Concordia University.

Hazegh Fetratjoo, Mohammad (2011) A framework for automatic modeling of underground excavations in homogeneous rock mass. PhD thesis, Concordia University.

Hirzallah, Walaa (2011) Effectiveness of Electrochemical Treatment of Municipal Sewage. Masters thesis, Concordia University.

Huang, Kuo Cheng (2011) Traffic Simulation Model for Urban Networks: CTM-URBAN. Masters thesis, Concordia University.

Ibeid, Sharif (2011) Enhancement of the submerged membrane electro-bioreactor (SMEBR) for nutrient removal and membrane fouling control. PhD thesis, Concordia University.

Javed, Khalid (2011) Behavior of Sensitive Clay Subjected to Static and Cyclic Loading. PhD thesis, Concordia University.

Kakoli, Sarah Tahsin Noor (2011) Negative skin friction induced on piles in collapsible soils due to inundation. PhD thesis, Concordia University.

Li, Yang (2011) An Experimental and Numerical Study of the Influence of Room Factors and Hygroscopic Material of Wood Paneling on the Indoor Environment. PhD thesis, Concordia University.

Liu, Song (2011) Particle-tracking Methods for Wastewater Dispersion in Coastal Waters. Masters thesis, Concordia University.

Martin, Edouard Philippe (2011) Comparative Performance of Different Statistical Models for Predicting Ground-Level Ozone (O3) and Fine Particulate Matter (PM2.5) Concentrations in Montréal, Canada. Masters thesis, Concordia University.

Monfet, Danielle (2011) New ongoing commissioning approach of central plants: methodology and case study. PhD thesis, Concordia University.

Morales, Juan David (2011) Numerical Simulations of Steel Frames Equipped with Friction-Damped Diagonal-Bracing Devices. Masters thesis, Concordia University.

Najafi Nejad Nasser, Azita (2011) An Experimental Investigation of Flow Energy Losses in Open-Channel Expansions. Masters thesis, Concordia University.

Nirvan, Golzar (2011) The Impact of Garage – House Interface Leakage on Contaminant Transport. Masters thesis, Concordia University.

O'Brien, WT (2011) Development of a Solar House Design Methodology and its Implementation into a Design Tool. PhD thesis, Concordia University.

Qasem, Altayeb (2011) Performance Assessment Model for Wastewater Treatment Plants. PhD thesis, Concordia University.

Roofigari-Esfahan, Nazila (2011) Project Schedule Compression Considering Multi-objective Decision Environment. Masters thesis, Concordia University.

Safari, Vida (2011) A Systematic Approach to Evaluating Gaseous Filter Models. Masters thesis, Concordia University.

Salman, Alaa (2011) Reliability-Based Management of Water Distribution Networks. PhD thesis, Concordia University.

Semaan, Nabil (2011) Structural Performance Model for Subway Networks. PhD thesis, Concordia University.

Sooch, Gurinderbir Singh (2011) Methodologies for Seismic Assessment of Concrete Gravity Dam-Foundation Systems. Masters thesis, Concordia University.

Tamasauskas, Justin (2011) Modeling and Optimization of a Solar Assisted Heat Pump Using Ice Slurry as a Latent Storage Material. Masters thesis, Concordia University.

Vazhbakht, Bahareh (2011) A finite element mesh optimization method incorporating geologic features for stress analysis of underground excavations. Masters thesis, Concordia University.

Xia, Rui (2011) A Parametric Modeling Study of the Climate Change Impact on River Eutrophication and Water Quality. Masters thesis, Concordia University.

Zeng, Qingjie (2011) Performance Evaluation of Signage System in Subway Stations. Masters thesis, Concordia University.

Zisis, Ioannis (2011) Wind Load Paths on Wood Buildings. PhD thesis, Concordia University.