Items where Division is "Building, Civil and Environmental Engineering" and Year is 2013

Aghighi, Alireza (2013) Evaluation of UV-PCO Air Cleaners Performance at Low Level VOCs Concentration. Masters thesis, Concordia University.

Allard, Amélie (2013) A Linear Data-Driven System Identification Methodology for an Active/Passive Solar Thermal Storage System and Application to a Solar House. Masters thesis, Concordia University.

Alzraiee, Hani S. H. (2013) Hybrid Simulation for Construction Operations. PhD thesis, Concordia University.

Azarm, Roya (2013) Material Status Index for Tracking and Progress Reporting of Construction Projects. Masters thesis, Concordia University.

Badreddine, Amne (2013) Accessibility of Wheelchair Users To Residential Units Under the National Building Code. Masters thesis, Concordia University.

Bucking, Scott (2013) Pathways to Net-Zero Energy Buildings: An Optimization Methodology. PhD thesis, Concordia University.

Chatterjee, Arghya Kamal (2013) Seismic response analysis of steel plate shear wall systems using detailed and simplified models. Masters thesis, Concordia University.

Chen, Yuxiang (2013) Methodology for Design and Operation of Active Building-Integrated Thermal Energy Storage Systems. PhD thesis, Concordia University.

Danila, Nicolae Ionel (2013) NUMERICAL MODELING AND DESIGN OF LOW-RISE CONCENTRICALLY BRACED FRAMES WITH DOUBLE-PIN DISSIPATIVE CONNECTIONS. Masters thesis, Concordia University.

El shenawy, Ahmed (2013) Exergy-based Index for the assessment of building sustainability. PhD thesis, Concordia University.

El-Sawi, Azeldin (2013) Centralized Thermal Storage Systems Model for Buildings of the Future: Development and Validation. PhD thesis, Concordia University.

Ghodoosipoor, Farzad (2013) Development of Deterioration Models for Bridge Decks Using System Reliability Analysis. PhD thesis, Concordia University.

Ghoreishi, Mehrafarid (2013) STRUCTURAL RESPONSE OF REINFORCED CONCRETE FLAT SLAB EXPOSED TO HEAT. PhD thesis, Concordia University.

Hajra, B., Stathopoulos, T. and Bahloul, A. (2013) A Wind Tunnel Study of the Effects of Adjacent Buildings on Near-Field Pollutant Dispersion from Rooftop Emissions in an Urban Environment. Journal of Wind Engineering and Industrial Aerodynamics, 119 . pp. 133-145.

Islam, Mohammad Sajjadul, Bagchi, Ashutosh and Said, Aly (2013) Developing a Pattern-Based Method for Detecting Defective Sensors in an Instrumented Bridge. Journal of Civil Structural Health Monitoring . ISSN 2190-5452 (In Press)

Jiang, Xuejiao (2013) Anaerobic Batch Treatment of Carbon Dioxide in Pulp and Paper Effluent. Masters thesis, Concordia University.

Kazemi, Hamed (2013) The Capacity of Pulp-and-Paper Wastewater in the Absorption of CO2 and its removal from the gas phase. Masters thesis, Concordia University.

Krpan, Ronald (2013) Wind-driven Rain on Buildings in Metro Vancouver: Parameters for Rain Penetration Testing of Window Assemblies. Masters thesis, Concordia University.

Lateb, M., Masson, C., Stathopoulos, T. and Bedard, C. (2013) Comparison of Various Types of k-ε Models for Pollutant Emissions around a Two-Building Configuration. Journal of Wind Engineering and Industrial Aerodynamics, 115 . pp. 9-21.

Liu, Jun (2013) Dynamic Modeling and Gain Scheduling Control of a Chilled Water Cooling System. Masters thesis, Concordia University.

Mahdavi, Alireza (2013) Efficiency Measurement of N95 Filtering Facepiece Respirators against Ultrafine Particles under Cyclic and Constant Flows. Masters thesis, Concordia University.

Matout, Nagham (2013) Estimation of the Influence of Artificial Roadway Lighting on Road Collision Frequency. Masters thesis, Concordia University.

Mirahadi, Seyedfarid (2013) Simulation-Based Construction Productivity Improvement Using Neural-Network-Driven Fuzzy Reasoning System. Masters thesis, Concordia University.

Mirvalad, Seyed Javad (2013) Robustness and Retrofit Strategies for Seismically-Designed Multistory Steel Frame Buildings Prone to Progressive Collapse. Masters thesis, Concordia University.

Mirvalad, Seyed Sajjad (2013) Improving performance of Portland-limestone cements in sulfate exposures using supplementary cementing materials. PhD thesis, Concordia University.

Mohammadi, Babak (2013) Development of Concrete Water Absorption Testing for Quality Control. Masters thesis, Concordia University.

Montaser, Ali (2013) Automated Site Data Acquisition for Effective Project Control. PhD thesis, Concordia University.

Moufti, Sami (2013) A Defect-Based Approach for Detailed Condition Assessment of Concrete Bridges. Masters thesis, Concordia University.

Nakhaie Ashtiani, Arya (2013) A Simplified Heat Wave Warning System. Masters thesis, Concordia University.

Ng Cheng Hin, Jason (2013) Life Cycle Optimization of a Residential Solar Combisystem for Minimum Cost, Energy Use and Exergy Destroyed. Masters thesis, Concordia University.

Poterasu, Anamaria (2013) Experimental investigation on passive earth pressure on walls retaining collapsible soil. Masters thesis, Concordia University.

Pournazeri, Shaghayegh (2013) Prediction of turbulent flow and scour around bridge piers: Development of a non-hydrostatic model with non-uniform sediments. PhD thesis, Concordia University.

Ranjbaran, Yalda (2013) Integrated Computational Model in Support of Value Engineering. Masters thesis, Concordia University.

Rezaiefar, Ali (2013) Finite Element Modeling of Cyclically Loaded FRP-Retrofitted RC Squat Shear Walls. Masters thesis, Concordia University.

Sakib, Md Nazmus (2013) CFD Techniques for simulation of flow in a scour hole around a bridge pier. Masters thesis, Concordia University.

Sarieddine, Mazen (2013) Effects of Strong-motion Duration on the Response of Reinforced Concrete Frame Buildings. Masters thesis, Concordia University.

Shahata, Khaled Farouk (2013) Decision-Support Framework for Integrated Asset Management of Major Municipal Infrastructure. PhD thesis, Concordia University.

Shahrokhi Shahraki, Hamed (2013) An Efficient Soft Computing Based Method for Calibration of Vehicular Microscopic Simulation Models. Masters thesis, Concordia University.

Sinha, Anup (2013) 3-D Modeling of Piled Raft Foundation. PhD thesis, Concordia University.

Soltani, Mohammad Mostafa (2013) Neighborhood Localization Method for Locating Construction Resources Based on RFID and BIM. Masters thesis, Concordia University.

Stathopoulos, T., Elsharawy, M. and Galal, K. (2013) Wind Load Combinations Including Torsion for Rectangular Medium-Rise Buildings. International Journal of High-Rise Buildings, 2 (3). pp. 1-11.

Tajeen, Humaira (2013) Dataset Development for the Recognition of Construction Equipment from Images. Masters thesis, Concordia University.

Tominaga, Y. and Stathopoulos, T. (2013) CFD Simulation of Near-Field Pollutant Dispersion in the Urban Environment: A Review of Current Modeling Techniques. Atmospheric Environment, 79 . pp. 716-730.

Tremblay, Véronique (2013) Ongoing commissioning of heat recovery process in a central heating and cooling plant. Masters thesis, Concordia University.

Wang, Bao Zhen (2013) Spatial Information Technology Based Modeling Approach for Air Pollution Assessment. PhD thesis, Concordia University.

Wen, Xiao-Nan (2013) Computer Simulation of Solar Combisystem Based on the Second Law Analysis. Masters thesis, Concordia University.

Yang, Pu (2013) Real-time Building Airflow Simulation Aided by GPU and FFD. Masters thesis, Concordia University.

Zhong, Lexuan (2013) Experimental Evaluation and Modeling of Photocatalytic Oxidation Air Cleaners. PhD thesis, Concordia University.

attar, shaghayegh (2013) the hydraulics of near-boundary flow and sediment transport in river channels. PhD thesis, Concordia University.