Items where Division is "Building, Civil and Environmental Engineering" and Year is 2016

Article

Al-Quraan, A., Stathopoulos, T. and Pillay, P. (2016) Comparison of wind tunnel and onsite measurements for urban wind energy estimation of potential yield. Journal of Wind Engineering & Industrial Aerodynamics, 156 . pp. 1-10.

Blocken, B., Stathopoulos, T. and Van Beeck, J. P. A. J. (2016) Pedestrian-level Wind Conditions around Buildings: Review of Wind-tunnel and CFD Techniques and their Accuracy for Wind ComfortAssessment. Building and Environment, 100 . pp. 50-81.

Rounis, E. D., Athienitis, A. K. and Stathopoulos, T. (2016) Multiple-inlet Building Integrated Photovoltaic/Thermal system modelling under varying wind and temperature conditions. Solar Energy, 139 . pp. 157-170.

Tominaga, Yoshihide and Stathopoulos, Ted (2016) Ten Questions Concerning Modeling of Near-Field Pollutant Dispersion in the Built Environment. Building and Environment, 105 . pp. 390-402.

Thesis

Abbasi-Garravand, Elham (2016) Using Pressure Retarded Osmosis Technology to Generate Salinity Gradient Energy (Osmotic Power) as a New Renewable Energy Source: Pretreatment to Reduce PRO Membrane Fouling. PhD thesis, Concordia University.

Adesina, Adeyemi Damilare (2016) Influence of Moisture on Alkali Silica Reaction. Masters thesis, Concordia University.

Ahmed, Sameh (2016) Investigation of Multi Suppressive Layers under Impact Load. PhD thesis, Concordia University.

Ai, Xin (2016) Stability Assessment of Homogeneous Slopes Loaded with Mobile Tracked Cranes – An Artificial Neural Network Approach. Masters thesis, Concordia University.

Babaee, Fatemeh Yassaman (2016) Removal of Arsenic from Water and Immobilization in Soil Using Iron/Copper Nanoparticles. PhD thesis, Concordia University.

Badawieh, Ammar (2016) Investigation of the Mobility and Extraction Potential of Vanadium and Coupled Metals (Nickel and Lead) in Oily Sludge Matrix under Electrokinetic Conditions. PhD thesis, Concordia University.

Bahri, Mitra (2016) Metal Organic Frameworks as Dual Functional Adsorbent/Catalysts for Plasma Air Purification Systems. PhD thesis, Concordia University.

Banerji, Srishti (2016) Vibration Based Monitoring and Damage Detection of Structures using Wireless Sensors. Masters thesis, Concordia University.

Barua, Kallol (2016) Seismic Performance of Perforated Steel Plate Shear Walls Designed According to Canadian Seismic Provisions. Masters thesis, Concordia University.

Chiu, Vincent (2016) The Effect of Overhang on Wind-Driven Rain Wetting for a Mid-Rise Building. Masters thesis, Concordia University.

Christopher, Aquiles (2016) A comfort index for public transportation riders. Masters thesis, Concordia University.

De Macedo, Rodrigo (2016) Seismic Response of Transmission Line Guyed Towers With and Without the Interaction of Tower Conductor Coupling. Masters thesis, Concordia University.

Ebrahimi Khonacha, Samira (2016) Numerical Modeling of Foundations on Dense Sand Overlaying Loose Sand. Masters thesis, Concordia University.

Elhassan, Wael (2016) 3D Modeling of Indoor Building Geometry Using Unmanned Aerial Systems. Masters thesis, Concordia University.

Eslamian, Seyed Alireza (2016) The Development of a New Model for Predictions of Urban Water Demand. Masters thesis, Concordia University.

Goubran, Sherif ORCID: https://orcid.org/0000-0002-2365-0351 (2016) Energy Saving Impact of Air Curtains in Commercial Buildings. Masters thesis, Concordia University.

Heydari, Mahnoush (2016) Justifying and Prioritizing Roadway Lighting: A Case Study of Quebec Highways. Masters thesis, Concordia University.

Hossain, Shahriar (2016) A Generalized Radiosity Simulation Model and Full-Scale Experimental Verification of a Corner Office having Three Section Façade with Motorized Shading. Masters thesis, Concordia University.

Hosseini, Seyedehfatemeh (2016) Novel submerged membrane electro-bioreactor-anaerobic/anoxic ammonia oxidation (SMEBR-Anammox). Masters thesis, Concordia University.

Ikpong, Anthony Akpan (2016) Managing Highway Bridges against Climate-Triggered Extreme Events in Cold Regions. PhD thesis, Concordia University.

Ioannidis, Zissis (2016) Double Skin Facades Integrating Photovoltaic Panels, Motorized Shades and Controlled Air Flow. Masters thesis, Concordia University.

Ismaeel, Mostafa (2016) Performance based budget allocation model for water networks. Masters thesis, Concordia University.

Javan Roshtkhari, Soroor (2016) Application of Rhamnolipid and Microbial Activities for Improving the Sedimentation of Oil Sand Tailings. PhD thesis, Concordia University.

Javan Roshtkhari, Soroor (2016) Application of Rhamnolipid and Microbial Activities for Improving the Sedimentation of Oil Sand Tailings. PhD thesis, Concordia University.

Kabir, Md Imran (2016) Lateral Torsional Buckling of Welded Wide Flange Beams. Masters thesis, Concordia University.

Kapsis, Konstantinos (2016) Modelling, Design and Experimental Study of Semi-Transparent Photovoltaic Windows for Commercial Building Applications. PhD thesis, Concordia University.

Le Cam, Mathieu (2016) Short-term forecasting of the electric demand of HVAC systems. PhD thesis, Concordia University.

Li, Chao (2016) Vehicular Safety and Operations Assessment of Reserved Lanes using Microscopic Simulation. Masters thesis, Concordia University.

Li, Weigang (2016) Numerical and Experimental Study of Thermal Stratification in Large Warehouses. Masters thesis, Concordia University.

Mashhour, Ibrahim (2016) Experimental Study on Negative Skin Friction on Piles In Collapsible Soils Due to Inundation. PhD thesis, Concordia University.

Mashhour, Ibrahim (2016) Experimental Study on Negative Skin Friction on Piles in Collapsible Soils due to Inundation. PhD thesis, Concordia University.

Mohamed Seif ElDin, Hany (2016) In-Plane Shear Behaviour of Fully Grouted Reinforced Masonry Shear Walls. PhD thesis, Concordia University.

Mohammadhosseinpour, Bahareh (2016) Nitrogen Removal by the Combined Partial Nitrification and Anammox Processes in the BioCAST Technology. Masters thesis, Concordia University.

Mohammed, Azhar Uddin (2016) Integrated Reliability Assessment of Water Distribution Networks. Masters thesis, Concordia University.

Najafi Nejad Nasser, Azita (2016) Two-Phase Bubble Flow Modelling for Restoration of Eutrophic Lakes. PhD thesis, Concordia University.

Nath, Mrinmoy (2016) Seismic design and performance of Yielding Shear Panel Device. Masters thesis, Concordia University.

Osman, Ashraf Mohamed Ahmed (2016) Design Optimization of Composite Deployable Bridge Systems Using Hybrid Meta-heuristic Methods for Rapid Post-disaster Mobility. PhD thesis, Concordia University.

Otayek, Elie (2016) Integrated Decision Support System for Bridge Type Selection at Conceptual Design Stage. PhD thesis, Concordia University.

Papachristou, Anastasios (2016) An experimental and numerical investigation of predictive control with different building-integrated thermal storage systems. Masters thesis, Concordia University.

Pourhosseini, Omid (2016) Availability based maintenance scheduling in Domestic Hot water of HVAC system. Masters thesis, Concordia University.

Qi, Dahai (2016) Analytical Modeling of Fire Smoke Spread in High-rise Buildings. PhD thesis, Concordia University.

Rouhieh, Behzad (2016) Modeling And Optimizing Route Choice For Multimodal Transportation Networks. PhD thesis, Concordia University.

Saborimanesh, Nayereh (2016) ¬Dispersion and Bacterial Degradation of Weathered Diesel, Biodiesel and Light Crude Oil in Seawater by Sophorolipid Biosurfactant. PhD thesis, Concordia University.

Sarma, Shrabani (2016) Removal of nutrients and suspended solids from a eutrophic lake. Masters thesis, Concordia University.

Serag, Ahmed (2016) A Customer-driven Decision Making Framework for Drinking Water Systems. Masters thesis, Concordia University.

Thirunavukarasu, Asok (2016) Protocol for Low Energy Houses for Northern Canadian Regions. Masters thesis, Concordia University.

Troshin, Valeriy ORCID: https://orcid.org/0000-0002-4197-3680 (2016) Development of Electro-Anaerobic Membrane Bioreactor (EAnMBR) for treatment of high-strength industrial wastewater. PhD thesis, Concordia University.

Yuan, Sophie (2016) A study of hybrid ventilation in an institutional building for predictive control. Masters thesis, Concordia University.

Zeng, Rui (2016) Large Eddy Simulation of Boundary Shear Stress in Water Channels of Rectangular and Trapezoidal Shapes. Masters thesis, Concordia University.

Zhao, Pengfei (2016) Digital Image Correlation to Evaluate Plastic Shrinkage Cracking in Cement-Based Materials. Masters thesis, Concordia University.

lim, chaewoon (2016) Application of vibration-based techniques for modal identification and damage detection in structures. Masters thesis, Concordia University.

moursi, ahmed (2016) priority assessment model for water distribution networks. Masters thesis, Concordia University.

zangenehmadar, zahra (2016) Asset Management Tools for Sustainable Water Distribution Networks. PhD thesis, Concordia University.